similar to: Routing issue

Hi List, I have another issue on allowing outgoing calls to PSTN on Asterisk via Avaya Phones, I hope that anyone could help me fix this issue: *When I dial through Avaya phone i just here a "good bye message" reply from asterisk server. And here is the log:* == Starting OOH323/(null)-b7db8aa0 at internal,s,1 failed so falling back to exten 's' == Starting

Hello, My client customers complaining that their calls suddenly get hung-up, I am just investigating if the problem from my side, I had a log of a hang-up case, Does it help to know if there is a problem that can be resolved from my side? elastix*CLI> -- Hungup 'IAX2/99999-6813' == Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on

i have posted this question couple of times and never really got any hits i wasn't able to provide any debug info Connected to Asterisk 1.6.0.21 currently running on phoneserver (pid = 3309) Verbosity is at least 4 == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 == Using SIP VRTP TOS bits 136 == Using SIP VRTP CoS mark 6 == Extension Changed 117[ext-local] new

Hello, I have setup the n-way conferencing with Asterisk and it's working when I use with my budgetone 100 phone but it doesn't work for any of the voip software or other ATA that I have. When I turned the debug on, I see that the correct keys (*0) were entered but asterisk doesn't detect the signal to trigger the features event. I have set a test extension to get the input dtmf key

Hi, With Asterisk 1.8.3, I can't figure out how to pass an argument to a macro which is used within an originate command. Here is my sample dialplan to illustrate: exten => 123,1,Answer() exten => 123,n,Originate(SIP/20,app,Macro,foo,bar) exten => 123,n,NoOp(This is the NoOp after the originate command) exten => 123,n,Wait(30) exten => 123,n,Hangup() [macro-foo] exten =>

Hi people, I have a problem with some extensions. The calls are ended after 31/35 seconds, also, it depends on the number which I call. This is the log, but I've not been able to find something wrong... Any ideas? [Jun 11 15:50:46] DEBUG[26071] app_macro.c: Executed application: ExecIf [Jun 11 15:50:46] VERBOSE[26071] logger.c: -- Executing [s at macro-dialout-trunk:16]

I've got a piece of CPE equipment that has an FXS port that I have tied to an FXO port on a TDM400 clone card. Normally, if I go off-hook with a standard telephone connected to it, I get a dialtone. If I dial a digit, and send a hookflash, the device will provide a dialtone back for the next available channel on the device. I'm trying to recreate this same behavior with Asterisk,

Hello, This is my first asterisk installation, and having read up on the documentation, and trying several tutorials i'm unable to get my outbound route working. I'm certain it's an issue with my configuration and my inexperience with asterisk. So i have my POTS phone connected to my digium card, and when i make a call, I receive the "cannot be completed as dialed" message.

[also posted on Trixbox trunk forum] I am also working with Sangoma directly to debug this, but so far no real luck. TrixBox 2.6.1, A102d card with V33 firmware (latest) and WANPIPE 3.2.6 (3.2.7 is out, but nothing has changed that would affect this problem). The system gets about 200 calls inbound on the trunk, which is not very heavily used, and of those calls one or two a day is randomly

Hi All, I have searched the various post and not able to find the solution. I am using Asterisk 1.4.21.2 for outgoing calls. Earlier i used ZAP trunk and it works fine. Now i need to move to SIP trunk and configured the same. When i try from softphone i got error as "Call rejected" and in the asterisk i got error as

Hi, We are using asterisk 1.4.34, ubuntu 10.4, below is suspicious activity recorded in our full log. Could you help us to explain what had happened. Thanks. === my friend, 801, from his room did a test by dialing echo test in freepbx, *43: [Aug 20 14:42:46] VERBOSE[14427] logger.c: -- Executing [*43 at from-internal:1] Answer("SIP/801-000003f5", "") in new stack [Aug 20

hi,all when i send a call to other server use SIP trunk, i got this below, <--- SIP read from 222.46.18.52:5060 ---> SIP/2.0 403 Forbidden what's rong with is? > Asterisk 1.4.21.2, Copyright (C) 1999 - 2008 Digium, Inc. and others. > Created by Mark Spencer <markster at digium.com> > Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for

i have a prablom here, i want to send a call from A to B use sip trunk , the call can sended B,but not work to PSTN. the message from B server. help pls,what's rong? > > <--- SIP read from 192.168.0.176:5060 ---> > INVITE sip:15921256331 at 192.168.0.151 <sip%3A15921256331 at 192.168.0.151>SIP/2.0 > Via: SIP/2.0/UDP 192.168.0.176:5060;branch=z9hG4bK51a51b96;rport

I just had a user report that they called out to someone on a cell phone this morning, and after a short conversation, the call was dropped/lost. The person on the cell phone says that this is very rare, and would not suspect the dropped/lost call to be on their side. I have looked at the asterisk/full log as thoroughly as I can, and have pasted the lines which seem relevant to that call below.

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to

Hello Gurus I've installed my Asterisk server for testing on the company I work the setup or the approach let's call it is: 1 Asterisk Server fully configured and with some SIP extensions setup on two cities A and B. 2. One local PSTN line connected thru a x01p card to call local phone numbers numbres on city A. 3. A Sipura 3102 Gateway on city B connected to a city's B PSTN line. I

I am trying to record calls on demand both inbound and outbound calls. I can record outbound calls just fine but not inbound calls or calls from an internally between extensions. I am using the latest asterisk 1.8.x certified version. On an outbound call I see: == Using SIP RTP CoS mark 5 -- Called SIP/ BVTrunk /7190000000 -- SIP/BVTrunk-00000163 is making progress passing it to

Hello all. I have installed AsteriskNow 1.7.1 with all updates. I'm able to make outbound calls without any problem (the external calls are made via an analog line, and the receiver see the CID). However I'm unable to forward incoming calls to the destination I want. What happens is when I make an internal call I ear a "bye". Bellow is the log of the internal call: --

Whenever I try to drag calls to the Parking Lot or On Hold, FOP would drop my calls. I have searched online and have found similar problem, such as the link below. I have tried their solution but still the FOP is not working correctly. I even installed the HUDLite server and is getting the same results. www.freepbx.org/forum/freepbx/users/flas...ot-transfering-calls Here is the log when I tried

Hello. I am running Asterisk v1.6 on Ubuntu 10.10 with FreePBX v2.8. When I call the voicemail for any of my extensions, the call just dies. On a softphone, I get no sound whatsoever; it just hangs up after a couple of seconds. On my handset attached to my SPA-3102, it get a sound like when you leave an analogue phone off the hook. I have three extensions setup and they all do the same thing.