similar to: unnumbered priorities

Hey All, I need to forward an extension to an other depending on the current time but I could not get it done with GotoIfTime. What I'm trying to do is ring on the extension 1 if time is between 8:00AM and 2:00PM and on extension 2 if is between 2:01PM 11:00PM. exten => 111,1,GotoIfTime(8:00-14:00|*|*|1-12?333) exten => 111,2,Dial(${Person1}) exten => 111,3,Dial(Hangup) exten

Hi Guys, Running the following with a Sangoma A101D PRI card: *Asterisk 1.4.21.2* *LibPRI version: 1.4.10* No inbound or outbound calls can be made. In fact Asterisk CLI doesn't show any activity. Problem goes away on restart of the system or maybe asterisk. I see post about upgrading Libpri to 1.4.10.2 and then I see posts that even that didn't work. Anyone can weigh in this please?

Entering a comment in WordPress, one of my users stumbled upon an interesting problem with PHP Markdown: 1. You write a numbered paragraph. You write a second, unnumbered paragraph to elaborate. 1. You another numbered paragraph, and the numbering resets to 1, even if you number the paragraph 2. I understand what's going on here, with PHP Markdown interpreting each of the two numbers as

Hi! Can I create the unnumbered GRE tunnel with iproute2 utility? Can someone provide me a link/howto/example_config how to do it? The topology is one tunnel between two linux boxes: -- eth1-|__|-eth0 <-------------> eth0-|__|-eth1 -- I''m trying now with: ip tu add tun1 mode gre local loc.IP remote rem.IP ttl 255 dev eth0 ip addr add tun1 0.0.0.0 ip link set tun1 up but it

Hi Guys, Anyone might know why this error keeps showing up and inbound/outbound is not working on a Bell PRI with Sangoma A101D? -- Got SABME from network peer. Sending Unnumbered Acknowledgement No calls can be made inbound/outbound. Keeps repeating. No alarms ON and no changes been made to the system. Stopped all a sudden. Asterisk CLI doesn't show anything with full verbose for both

Hi, I am new to Asterisk and I am having a setup problem that I am trying to resolved for the last couple days without any success. I am pretty much desperated on this issue and I don't know why. Can someone please kindly help me to troubleshoot this? I can't hear any audio from Asterisk when running Playback or VoiceMail tests. I have my Asterisk server ( running on Debian,

Has anyone come up with any ideas on how to place a call on hold and have them use MOH, with out having to park the call? This is using a analog phone. I know you can hit flash or # but that just gives me dial tone. I need to come up with a solution that the user can place the caller on hold, the caller here MOH and the user hang the receiver up. Just as if they hit, the hold button on the

Hi I'd like to make tincd work with other crypto apis than openssl/ libcrypt. I've learned from the subversion repository that an effort was started to port it to gnu-tls. I for myself would like to get tincd linking against xyssl (1) because it is very lightweight and thus an adequate option on devices with little memory and disk/flash space, i.e. embedded systems. Now i'm

Could anyone with any experience with * over a non-PRI T1 help this newbie? I have a fractional T1 that is working fine through a channel bank, but I can't get any response on * using a T400P. My analog line and the extensions work fine, but the T400P port 1 shows a red led (what exactly does that tell me?). I brought up zttool which shows a condition red also, but ztcfg shows nothing amiss.

Hi, I have a host with 6 VMs set to autostart. When this host reboots, it starts libvirtd, pegasus cimom and libvirt-cim. It also restarts the VMs. Intermittently we noticed a core during start up that points to the last call made by libvirt-cim to "virInitialize". I am thinking that it is a timing issue where virInitialize is called while libvirt is trying to autostart the VMs.

Hi, Libvirt provides classes such as Xen_ComputerSystem, Xen_Processor etc., in order to build applications using libvirt-api which can interact with the Xen Hypervisor. I would like to know what are the corresponding classes for the KVM hypervisor, so that I can use libvirt-cim to communicate with the hypervisor. Would it be Kvm_ComputerSystem or Qemu_Computersystem? Any help in this regard

Modem connect speeds on calls through * seem to be lower than calls made through the telephone company lines or our old Rolm PBX. All data calls have 2 wire analog modems on both ends. For my set up I have channels of a Zhone channel bank tied to 2 modems. The Zhone channel bank interfaces my * server with a T400P card. modem --- Zhone Channel bank - * via T400P card - Zhone channel bank -

I was wondering how Puppet relates to the DMTF''s CIM. AFAICT there is a clear connection between the two, but I see very little discussion on the topic on the list. Thanks, Cameron. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to

While I was away on vacation, buried deeply in another thread (New Asterisk bounty: SIP simultaneous), Olle E. Johansson raised a question which is close to my heart - Asterisk's management model. A management model which simply manages telephone extensions and dial plans is irrelevant to most organisations. We need a model which manages users and their interaction with the PBX. I am

Regarding my earlier post about labels and the 'n' priority: The TFOT book covers the use of these. See the box on page 81 entitled "Unnumbered Priorities." http://www.nufone.net/downloads/asteriskdocs/AsteriskTFOT.zip -MC

Hi all, Please help me out for authorize.net CIM(customer information manager) implementation. thanks -- Posted via http://www.ruby-forum.com/.

This patch causes "xm mem-set" to be lower bound on domX-min-mem option in xend-config. Another configuration option called domU-min-mem has been introduced, which works similarly to dom0-min-mem. This is prevents users from freezing the system when doing "xm mem-set" on very low values like 32M. Signed-off-by: Aravindh Puthiyaparambil

Dear R user I have data created using code below b<-matrix(2:21,nrow=4) b[,1:3]=NA b[4,2]=5 b[3,1]=6 Now the data is > b [,1] [,2] [,3] [,4] [,5] [1,] NA NA NA 14 18 [2,] NA NA NA 15 19 [3,] 6 NA NA 16 20 [4,] NA 5 NA 17 21 I want to keep data in column 4 greater than 15 and the value in column 1 & 2 either greater than 4

Hi, I'm trying to get my dialplan to continue executing in the current context after a third-party is called and hangs up. It seems like it should be straightforward but it's not working. Here's what I have in extensions.conf: exten => 333,1,Answer() exten => 333,n,Playback(hello) exten => 333,n,Dial(SIP/19992223333 at sipcarrier,,g) exten => 333,n,Playback(hello) exten

Hello, In Asterisk 1.4 beta 3, the UPGRADE.txt file says: Variables: * The builtin variables ${CALLERID}, ${CALLERIDNAME}, ${CALLERIDNUM}, ${CALLERANI}, ${DNID}, ${RDNIS}, ${DATETIME}, ${TIMESTAMP}, ${ACCOUNTCODE}, and ${LANGUAGE} have all been deprecated in favor of their related dialplan functions. You are encouraged to move towards the associated dialplan function, as these