similar to: Parallel port access

I'm trying to get Wine to print through it's PS driver, without success, on a HP DeskJet 694C, configured on Linux with the cdj670 driver. What I get to see on screen after I attempt to print are three windows with exclamation marks on a yellow triangle and garbled text. The first window is titled "Printer name", the second "Device name", the third "Output".

【Sorry there I maked some mistake in my first email, here is the correct one.】 I am trying to pass-through the parallel port of the host to the guest. When I just used qemu-system-x86_64 with option '-chardev parallel,id=charparallel0,path=/dev/parport0 -device isa-parallel,chardev=charparallel0,id=parallel0', it worked perfect. But when I tried to pass these option by adding lines below

I've looked at the web page http://www.la-sorciere.de/wine/index.html and http://wine.codeweavers.com. Still no luck, I'm getting the same error message: My config file is attached below: Here's what my director tree looks like: /home/magreen/c/windows/Start Menu/Programs What piece am I missing? TIA! -------------- next part -------------- WINE REGISTRY Version 2 ;; All keys

After quite a few days of perusing wine doc/source/config/mailing lists, I have found very scant references to accessing the raw parallel ports using wine. I am running FC2 linux (up-to-date) and have confirmed I can access the parallel port (dongle) presented to VMWare running a Windows 2000 guest OS successfully ie. access to /dev/parport0 works. I can also run all the programs included with

I have two machines both running centos 4.3. I have a laplink cable (parallel) between them. On one machine I do "echo Hello > /dev/parport0" on the other machine I wrote a short c program to open /dev/parport0 and when characters arrive print them on the screen. Seems simple enough but nothing comes across. Both machines parallel ports are set for PS/2 mode. Is there a reason this

Maybe some wise linux & WINE guru will help me to install Flash MX 2004 on my system, here's my problem: My system is Debian (unstable) and I've installed WINE a few hours ago. I've visited http://navi.cx/svn/misc/trunk/winekb/NativeDCOM.xml and did as written and was able to install DCOM98.EXE successfully. Then I went on to install Flash MX 2004 by running: $ wine Flash\

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: 95.bat Type: application/octet-stream Size: 44 bytes Desc: not available Url : http://www.winehq.org/pipermail/wine-users/attachments/20040827/0865b830/95.obj -------------- next part -------------- WINE REGISTRY Version 2 ;; All keys relative to

Hi all, I have installed centos 5.1 x86_64. 2.6.18-53.1.14.el5 Everything seems to be working fine except that the rtc module is not working. cat /proc/interrupts shows: CPU0 CPU1 0: 129 0 XT-PIC-XT timer 1: 330797 0 XT-PIC-XT i8042 2: 0 0 XT-PIC-XT cascade 3: 4 0

I'm have a remote printer installed in the cups. I shared the printer and it prints OK using the wine notepad. But I have a old application that prints only if have direct access to a lpt1 named port. We can test executing the program wine start.exe and run the command: echo 'test' > lpt1 that returns: File not found I tried to create the rule

PC: HP Vetra VL400 Mainbood: Intel815 BIOS: Phonix 4.0 release 6.0 OS: REDHAT 9.0 I installed the X100P in PCI slot 2 and disable the USB port, serial-port and parallel-port in BIOS. I can't found the X100P card in " cat interrupts" But I can found the card in the "cat ioports" use "lspci" I found the X100Pcard use the interrupts 11 too. Who can help me to solve

Hello I am using a Junghanns QuadBRI ISDN card - the module name is qozap. If I like at my interrupt assignment, qozap is sharing interrupt 10 with libata and uhci_hcd. I think libata is the IDE hard drive module and uhci_hcd is a USB module. linux:~ # modprobe qozap linux:~ # cat /proc/interrupts CPU0 0: 12634579 XT-PIC timer 1: 10 XT-PIC i8042

I have sucessfully gotten steam and wine to work however I cannot use microphone for voice communication , I an using alsa .Is there a way to turn on fullduplex sound like you do in winex by going into config and changing fullduplex=Y or does wine not support such a feature?

Hello, To my great satisfaction I managed to run with a windows program which I use in my company (invoices, supplies etc). The program runs well except printing... When I try to print to my cups printers I get the following infos: fixme:winspool:WINSPOOL_EnumPrinters We don't handle PRINTER_ENUM_CONNECTIONS fixme:winspool:WINSPOOL_EnumPrinters We don't handle PRINTER_ENUM_CONNECTIONS

My Cisco 7905 can't register with Asterisk (1.0.7-BRIstuffed-0.2.0-RC7k on Debian stable). It could, however, register with another installation of Asterisk and the settings on the phone (apart from the SIP proxy address) haven't changed since then. On the new Asterisk box my sip.conf contains this: [jeremy] type=friend regexten=801 allow=g729 host=dynamic secret=PASSWORD nat=yes

Hi , I am using the plot function for some data , and the plot is coming back pure black , with scales on the side . Regards Malcolm [[alternative HTML version deleted]]

Dear all, I have troubles to get the printing working in wine. I have downloaded Wine 20040309 and installed from sratch with ./tools/wineinstall Everthing seems to work fine except the printning: notepad gives: fixme:commdlg:PRINTDLG_SetUpPrinterListComboW Can't find '(null)' in printer list so trying to find default fixme:commdlg:PRINTDLG_SetUpPrinterListComboW Can't find

Does anyone know about an OCR program that can be used in wine? Thanks

Some time ago i already tried to get running a Digital Oszilloscope DSO-2100 at the parallel port LPT1. But i give up to get it running. Now i have another problem (http://forum.winehq.org/viewtopic.php?p=38741#38741) and so i have tested this again. This time i added the keys to the registry for direct parport access: Code: REGEDIT4 [HKEY_LOCAL_MACHINE\Software\Wine\VDM]

I am trying to pass-through the parallel port of the host to the guest. When I just used qemu-system-x86_64 with option '-chardev pty,id=charparallel0,path=/dev/parport0 -device isa-parallel,chardev=charparallel0,id=parallel0', it worked perfect. But when I tried to pass these option by adding lines below to the domain xml, ... </device> <qemu:commandline> <qemu:args

hi all, I'm using the official wine-20041201-0.1 on Sue 9.1 (i386). I used winetools 2.10 to facilitate my wine installation and it was a godsand. I have installed Office 2000 and so far so good, but I like to extend my wine functionality just a bit more. I like to install Acrobat 5 (not reader) with PDFWriter on my wine installation. The problem I have is that, during the