similar to: Ringing sound doesn't work

Is there a way to tell if an extension is in use? We run a call center and it would be helpful for the people taking calls to see if we are on the phone or DND. Is that setup in Asterisk or on the phone? the phone as busy lamp field but i will just turn on after a while even if the extension is not i use. the FOP in FreePBX doesn't appear to be that helpful. i am not sure what it is supposed

After struggling with one way audio issues as a result of STUN binding errors on both the Asterisk side and the Chrome side, we've decided to just simply go with a TURN relay for RTP packets until the issues are resolved. I configured rtp.conf so that all of the STUN related entries are commented out, and I use the following TURN configuration instead: turnaddr=numb.viagenie.ca:3478 ; ;

Hello Everyone, We have recently purchased a server which has 64GB of memory running a 64bit OS and I have compiled R from source with the following config ./configure --prefix=/usr/local/R-2.9.1 --enable-Rshlib --enable-BLAS-shlib --enable-shared --with-readline --with-iconv --with-x --with-tcktk --with-aqua --with-libpng --with-jpeglib and I would like to verify that I can use

On Fri, Mar 6, 2015 at 2:06 PM, Dmitriy Serov <serov.d.p at gmail.com> wrote: > Hello. > > Asterisk 13.2. > I transfer configs from chan_sip to res_pjsip. > In chan_sip i have "match_auth_username=yes" and have nothing in pjsip. > > I have a lot of endpoints and registrations on same SIP server. And it's > problem in pjsip now. Is not it? > > I

Hello. Asterisk 13.2. I transfer configs from chan_sip to res_pjsip. In chan_sip i have "match_auth_username=yes" and have nothing in pjsip. I have a lot of endpoints and registrations on same SIP server. And it's problem in pjsip now. Is not it? I requesting to add new value for endpoint option identify_by. The value 'uri'. Simple config (cutted): [siptrunk]

On Fri, Mar 6, 2015 at 3:46 PM, Dmitriy Serov <serov.d.p at gmail.com> wrote: > 07.03.2015 0:24, Kevin Harwell ?????: > > On Fri, Mar 6, 2015 at 2:06 PM, Dmitriy Serov <serov.d.p at gmail.com> > wrote: > >> Hello. >> >> Asterisk 13.2. >> I transfer configs from chan_sip to res_pjsip. >> In chan_sip i have

07.03.2015 0:24, Kevin Harwell ?????: > On Fri, Mar 6, 2015 at 2:06 PM, Dmitriy Serov <serov.d.p at gmail.com > <mailto:serov.d.p at gmail.com>> wrote: > > Hello. > > Asterisk 13.2. > I transfer configs from chan_sip to res_pjsip. > In chan_sip i have "match_auth_username=yes" and have nothing in > pjsip. > > I have a

Dear people, is it possible to have presence using Asterisk 1.2.13 / SIP with Linux/Debian Etch??? I'd like to see if my intranet contacts are available, busy, disconnected.... Thanks a lot Alejandro

hi, can you recommend "clean&simple&stable" solution for incoming call popup (in browser)? i'm using flash operator panel now but i want something without flash (maybe something in AJAX?) thanks --------------------------------------- Marek Cervenka =======================================

I have a puzzling situation, and would be grateful for any insight. I have a dialplan that forwards an incoming call out to another number via the same SIP trunk as it came in on. e.g. [from-siptrunk] exten => 0123456789,1,NoOp exten => 0123456789,n,Dial(SIP/siptrunk/0987654321) Now, if I use a different SIP trunk for the outbound call, than the inbound call came on, the call is set up

In article <20151125133008.6369360.14455.17239 at gmail.com>, Israel Gottlieb <isrlgb at gmail.com> wrote: > Try putting progress instead of answer Yes, I tried Progress already, and it didn't help. But thanks for the suggestion! Tony > I have a puzzling situation, and would be grateful for any insight. > > I have a dialplan that forwards an incoming call out to

Hello Everyone, Recently I was given a Java servlet based web calculator that will call R (libR.so to be exact) but I am having trouble trying to disable R from requiring --save, --no-save or --vanilla... Is there any way to build R on linux and disable R from asking --save, --no-save or --vanilla?? Thanks! -scz

I have 10 SIP trunks that I'd really like to round-robin load balance. Currently I have a macro that switches between available lines, but there really must be a function in Asterisk to do this on its own. So my question is just that, are there any easy ways for Asterisk to either balance between SIP trunks or even just a built in function to find the next available SIP trunk. I think using

I've been struggling with a Trixbox running Asterisk 1.6 for one of our customers as of late. The service provider in question is using BroadWorks and requires a single trunk registration for the trunk group. We have 4 users(lines/numbers) in the TG. The sip trunk is setup as follows: type=peer host=192.168.1.1 fromuser=<tgid> fromdomain=<sip domain> dtmfmode=rfc2833

I have the following extension to dial outside via SIP it's like this: phone----asterisk-----internet-----SIP provider----USA exten => _91NXXNXXXXXX,1,AGI(call_log.agi,${EXTEN}) exten => _91NXXNXXXXXX,2,Dial(${SIPtrunk}/${EXTEN},55,o) exten => _91NXXNXXXXXX,3,Hangup I want to strip the digit 9 before sending it to the SIP provider. Also, any suggestions for the above definition?

Thanks George, for your mighty quick response. I made the changes (re: server_uri_pattern etc.) and still, no luck--it fails for the same error. BTW, there is nothing for transport (but this is the same config from my SIP/UDP + Twilio days, which worked): *CLI> pjsip show transport twilio-siptrunk Unable to find object twilio-siptrunk. *CLI> pjsip show identifies No objects found. I did

> exten => _13XXXXXXX,1,dial(${OPERATOR},20) Hello "SIP/2.0 401 Unauthorized" Unfortunately the negative. An asterisk indicates a 404 error. On Tue, Mar 5, 2019 at 12:51 PM Doug Lytle <support at drdos.info> wrote: > > On 3/5/19 2:46 AM, Gokan Atmaca wrote: > > Asterisk can send calls, but I don't get a call. What could be the problem? > > >

Hi, I'm using the new SipAddHeader application on Asterisk 1.2.1, here's a snip of my extensions: exten => _9XXXXXXX,1,SipAddHeader(P-Asserted-Identity: <sip:${CALLERIDNUM} exten => _9XXXXXXX,2,SipAddHeader(P-Asserted-Identity: tel:${CALLERIDNUM}) exten => _9XXXXXXX,3,Dial(SIP/${EXTEN}@${SIPTRUNK},,tT) exten => _9XXXXXXX,4,Congestion The problems is that Asterisk

Hello Asterisk can send calls, but I don't get a call. What could be the problem? [from-siptrunk] exten => 13XXXXXXX,1,dial(${OPERATOR},20) Thanks.

Hi! I'm trying to set up a SIP trunk so that I can test calls, etc., between a new Asterisk box, and an old 1.4 box. --------------------------------------------------------------------------- New box: root at asterisk1:/etc/asterisk# head -1 sip.conf #include siptrunk.conf siptrunk.conf: [box1] ; All box1 extensions; see extensions.conf type=peer context=adhearsion host=172.17.0.17 ; IP