similar to: Dialogic support

Hello, I just received a couple SX440isdn phones and was wondering if they can be plugged into a Diva 4BRI port in NT mode and work with asterisk+chan_capi? I know they probably work fine with mutliHFC cards with either bristuff of chan_misdn but since I have some spare Divas, I was curious about their potential as phone ports. The Diva's 3 and 4 ports are already set to NT mode at boot

Hi all, I would like to announce the first release of the chan_capi channel driver on sourceforge.net The package is available for download with name chan_capi-cm-0.5 and is the current CVS HEAD. It is derived from the chan_capi-0.4.0PRE1 of kapejod. The main changes are: - complete rework - fix race-conditions - fix call state handling - rework of debug/verbose messages - added capiFax

Hi everyone, I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite happy with it. However, I am experiencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear "scratches" and "plops". It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to

I am trying to understand the difference between the divas4linux available from the Eicom/Dialogic website and the melware version. Am I right in thinking that the melware version is for Trixbox or Asterisk but the Dialogic version is for Asterisk only (i.e. will not work with Trixbox?). I've noticed that some of the things mentioned on the Dialogic web site as included with Divas e.g.

Hi! I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to have (short) answered before buying the DIVA card. I know there are several Eicon guys active on the list, thus I ask on the list instead of directly to Eicon so that all other will benefit as well. 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode? 2. Can the clock (master/slave) be configured independent

On 2/14/20 2:23 PM, Tobias Kirchhofer wrote: > On 14 Feb 2020, at 14:05, Armin Schindler wrote: > >> On 2/14/20 11:44 AM, Tobias Kirchhofer wrote: >>> On 14 Feb 2020, at 11:06, Armin Schindler wrote: >>> >>> ??? Hello! > > [?] > >>> For our new setup (planned with CentOS 8, waiting for the official repo for the latest dovecot >>>

Hello, sorry for beeing off-topic here. But can anyone confirm that there is a problem reverse resolving lists.digium.com (216.207.245.17) ? Because of this problem, my mail server will not accept mails from lists.digium.com (it is configured to accept valid DNS only). Armin

Hi all, it took a while, but on sourceforge.net I added the new release 0.6 of chan_capi-cm driver. Note: dial string and capi.conf has changed. The main changes are: - added 'relaxdtmf'. - more BSD compatibility - correct PROGRESS handling - added verbose text for capi info/reason error messages. - use correct facility-selector for echo-cancel - added application capicommand() for CAPI

Hi all ! What is the current status of the Dialogic channel driver ? Is it available ? Is it commercial ?? Any info ? Thanks

Hello configuration as follows, dial-out works: capi.conf: [hfcpci] ;;PointToPoint (55512-0) isdnmode=MSN incomingmsn=* ;msn=61 controller=1 devices=2 context=incoming extensions.conf: [incoming] exten => _XX,1,Playback(demo-abouttotry) exten => _XX,n,Dial,SIP/xlite1 exten => _XX,n,HangUp When call is placed, the following debug info is shown, after the last line, it stalls until

Hi to all I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus. I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start: [chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group Feb

Hello, I want to use a 4 port ISDN card from EICON/DIALOGIC in our asterisk server. The system is a Ubuntu 7.10 with kernel 2.6.23.1. The compilation of the kernel finishes without any problems. I have downloaded and installed the deb-source package that EICON/DIALOGIC offers. Th installation script crashes with the following error messages: # LOG ---- START SECTION read kernel version

On 2/14/20 11:44 AM, Tobias Kirchhofer wrote: > On 14 Feb 2020, at 11:06, Armin Schindler wrote: > > Hello! > > we are about to move from cyrus to dovecot and have one open issue > for that migration. > With cyrus we have "shared/" folders with a name that is self defined like > shared/project-xyz > but the email address for direct

Hello everyone! I've got a Eicon Diva Server BRI card into my "*" box working just fine, but I wander if there's anything I can do to improve voice quality for my operators. I'm thinking something along the lines of "auto gain" and sudden noise suppression (like when you hit a fax machine or the other party accidently touches the dial pad on the phone). Does

Armin, I am running 1.2.7.1 with an Eicon T1 board version 2 on Debian 2.4 I don't know the details on chan-capi / CAPI drivers. We did the install April of this year. How can I tell what I have? Thank you for your time. Tim -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Armin Schindler Sent: Wednesday,

Hello Armin, > The card is telling: > > CAPI INFO 0x34a2: No circuit / channel available > > so the other channel must be in use by something else. > Maybe another device on the ISDN line? > I have tested it several times now and always entered "capi info" before and after the call. The answer was always: Contr1: 2 B channels total, 2 B channels free. I'm

Hello All, Has anyone configured bri to answer for only one msn? In essence, when the primary is busy I want to have channel 2 ring. I am using an eicon diva server bri I know I saw it in the windows interface, but don't see it in the linux setup. Regards, Greg

Hello everyone, I'm using very simple setup to make and receive external ISDN calls through a softphone (x-lite version 3.0 - Win32) via an asterisk box. Hardware setup: - Dialogic Diva BRI (lspci yields: Network controller: Eicon Technology Corporation DIVA Server BRI-2M/-2F (rev 01)) - ISDN BRI line Software setup: - Redhat 9 - asterisk-1.4.16.2 - chan_capi-1.0.2 Asterisk configuration

On 30.08.2016 17:37, Guus Sliepen wrote: > On Tue, Aug 30, 2016 at 02:38:16PM +0200, Armin Schindler wrote: > >> we use a meshed VPN with TINC to connect 7 offices. >> Some office are in other countries and use other ISPs. The connection >> between some ISPs (peering partners) are not that good. This means we >> have packet loss between those direct connections.

On 09/03/2016 10:56 AM, Etienne Dechamps wrote: > C will still need keys in order to establish metaconnections with A and B (as > well as a few other things). However there is no need for C to own any > "Subnets" at all. If somebody breaks into C, he could get access to the vpn network, right? Because the keys are there, it will be possible to use them to get access. Even if