Displaying 20 results from an estimated 20000 matches similar to: "Linksys 224P switch and Polycom PoE phones"
2007 Jul 12
0
No subject
into the special PoE-RJ45 cable Polycom provides with the 501. And then
that cable into the phone.
What the heck could be wrong in such a simple setup?
Mike
--Boundary_(ID_G3pH8PW1IkpQFAsxrvEyBw)
Content-type: text/html; charset=iso-8859-1
Content-transfer-encoding: 7BIT
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META
2011 Jan 03
1
VoIP PoE phones for restaurant
Greetings,
I mailed the list regarding an intercom system some months ago and we
came to the conclusion that I should purchase a Polycom 501 phone.
I'm now considering the purchase for this year, and I'm now wondering
between the Polycom 501 and the 320 for the intercom.
I don't need the spare ethernet on the phone because I would like to
have my voice network separate from my
2011 Dec 01
3
Issue with Polycom SPIP650 and its sidecar [SOLVED]
2011/11/30 Mike <list at net-wall.com>
> Hi Olivier,****
>
> ** **
>
> It if occurs only on the sidecar, I would imagine this is either a
> defective sidecar/Polycom phone, or a defective PoE switch not giving
> enough power. Changing PoE port would eliminate of confirm the PoE port
> being the issue, but I?m betting on a Polycom defect.****
>
> ** **
>
>
2006 Jun 08
11
Linksys SRW224P POE Switch
We are currently considering the Linksys POE switch for a small Asterisk
office deployment. There will be no separate wiring closet to put it
in. Can anybody tell me if this switch has a loud fan? Users would not
be able to tolerate a loud noise close by. Otherwise we will go with a
fanless desktop switch.
Thanks,
--
Andres
2007 May 10
1
Polycom power over ethernet (PoE) cables for 500/501, 600/601 and 650 sets
Hi, folks:
I just took delivery of new PoE cables (PN 2200-11077-002) for our
Polycom phones here in the office.
I have the following to report, for the erudition of existing Polycom
users and those considering purchasing Polycom sets from the set of
models noted in the subject:
1. The cables do indeed work (hooray).
2. The cable has a module on it about a third of the way from a female
end.
2006 Jun 17
4
Which phones are good, or at least acceptable, for home and office
I am looking to replace all of the old "Bell" (POTS) phones in my home
and office with IP phones. As you can imagine I don't have a huge
budget to work with but I want phones that will provide acceptable voice
quality and durability.
There are basically three categories as I see it
1. satellite phones (low cost, low function)
2. primary domestic phone (good quality, POE capable,
2005 Oct 16
2
Can you use Polycom 500 with PoE Switch?
Hi,
Do you need a special cable and power for that unit or you can run it of PoE
Switch?
Thanks.
robert
2007 Mar 28
3
PoE - IEEE 802.3af
Hi,
I'm not clear on how to use Power--over-Ethernet, specifically with Polycom
phones.
What I understand, is that by buying the Polycom 501 with the 802.3af cable
bundle, I simply connect my phone, through the Polycom provided "special"
RJ-45 cable, into a PoE capable switch, and voil?!
Is this true? And if so, what happens when the Phone doesn't connect
directly to the
2007 Feb 13
6
Recomended POE Phones
Hi all,
I am looking for phones witch support POE, with a good relation between
quality and price to work with asterisk. I just see the Thompson st2030 and
the Linksys SPA 922 an SPA 942. Witch of this phones or another ones gave
you the best results in a productivity enviroment?
Thanks in advance.
VoipCrazy.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2007 Sep 24
0
Anyone use the Linksys phones? (Zeeshan Zakaria)
Note that the newish SPA962 has 6 appearances and a color screen.
I've noticed that the bright color screen does impress people when
they first see it. PoE is also very nice and web provisioning was
quite easy. I've yet to try a more automated provisioning method on
it. I know that getting the polycom's to auto provision wasn't very
straight forward. I do provision some
2006 Apr 21
10
Power over Ethernet (PoE) switch recommendations
Hi listers,
I am looking for people who have used Power over Ethernet switches, primarily in conjunction with Polycom IP 501's. I've been looking at the Linksys SRW224P, since I've had good luck with the SRW224 in our office. However, Nortel, Cisco, Adtran, etc. all have an offering, all of which vary in price. I would appreciate any input people have to offer.
Thanks,
James
2004 Dec 02
0
Polycom POE Rumor
>Message: 9
>Date: Thu, 02 Dec 2004 11:33:16 -0700
>From: "Kevin P. Fleming" <kpfleming@starnetworks.us>
>Subject: Re: [Asterisk-Users] Polycom 500, asterisk user opinions?
>To: Asterisk Users Mailing List - Non-Commercial Discussion
> <asterisk-users@lists.digium.com>
>Message-ID: <41AF5FEC.7050406@starnetworks.us>
>Content-Type: text/plain;
2006 May 25
0
Re: Implementing Paging on the Linksys SPA9XX phones (working)
I came up with this a few days ago, mostly used the wiki examples,
didn't have time to post on the wiki yet, maybe one of you guys with a
few minutes can throw it up there, really, I forgot my logon.
http://www.voip-info.org/wiki/index.php?page=Asterisk+Paging+and+Intercom
The agi script didn't work for me, wouldn't call the active hint
extensions, even though they were there, no
2007 Mar 30
1
Which IP Phones have buttons can be assigned to functions with Asterisk
Hi List;
Can someone advise me which IP Phone model that has
buttons that can be assigned to do specific
functionalities (call pickup, call formward, call
appearance) and a transfer button and hold button?
Which is the best of the following (that has buttons
can be assigned to specific functions):
Cisco 7970 or 7960
Polycom 501
Grandsream IP Phone Budge Tone 1001 or 1002
Linksys SPA 942 or 922
2006 Mar 15
6
Cisco phones and Linksys SRW224P
I'm having problem powering Cisco phone's (7940 and 7905) on Linksys SRW224P switch (with PoE functionality). I have tested three phone's, one is working (7905) and two aren't (7905 and 7940). I have plugged all three phones on same switch port with same cable!
Do I need to change anything in phone configuration? Is there something wrong with Linksys switch? How can I troubleshoot
2007 May 25
5
Polycom or Linksys phones bootp tftp config setup
Hi All,
Has anyone gotten the polycoms or the linksys phones to accept oprtion
66 on the dhcp request for the address of the tftp config server?
We have the dhcp server issuing the proper IP of the tftp server, but
the phones just sit there and never try to contact the tftp server for
their configs. We can see the proper option going from the dhcp to
the phones with ethereal trace.
Thanks
JR
2007 Mar 29
1
Polycom Power
I have a 501 with traditional power and a 301 with PoE. I rightfully assumed
that the traditional power from the 501 would work on the 301.
How do I get the PoE to work? Do I use the Polycom PoE cable in addition to
whatever PoE injection method I use? I have a Cisco PoE injector that works
on my Cisco AP350 and my 7960. No combination of this injector, the Polycom
cable, and the phone result in
2006 Mar 18
2
Jittery meetme conference using Linksys 942 phones
We have two Linksys 942 phones which sound great when they call each other
directly through Asterisk. But when they both dial in to a meetme conference
room, the sound is very jittery. Other phones like Polycom 501 and Snom 360
sound fine when using meetme.
Both Linksys phones are set to use the default g711u (ulaw) codecs.
Adjusting the jitter buffer and jitter level settings to various values
2008 Dec 21
5
Good comparisons on cheaper VOIP phones
Hello list,
I am doing some work for a non profit group.
As part of this, I am going to be putting in a 30 handset Asterisk solution.
We are trying to keep the costs down as much as possible, as this job
includes cabling, I am looking at POE solutions.
On the switch side, I am considering something like some Netgear ProSafe
FS726TP 24 port switches, or maybe the equivalent Linksys SRW224MP 24
2007 Mar 20
0
GXP-2000 Phones with Cisco 3560 PoE Switch
We are connecting the GXP2000 to a Cisco POE switch 3650, it the
default mode at 15.4 for each phone the phones power up but we can only
have 24 on a 48 port switch, when we adjust the setting to 7000 (which
is what we calculate the phone to use) they don't power up ... we
tried all the power settings from 7000 up to 154000 but it only powers
up at 15.4, we should be able to get almost 48