similar to: No subject

I am installing dahdi on a machine lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Hewlett-Packard Company Unknown device 9602 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD]

Hi, I''m trying to get Xen running on 2 different systems and have massive packet losts independ from the system I use! This are the results from an UDP-Benchmark-Test from an Xen-Server to another one. As you make notice, the sending packets have a lost rate from > 80% up to 99%. What the hell is going on? I have no ideas. If I boot my 2 Xen-Servers with the normal kernel (without

asterisk*CLI> dahdi show status Description Alarms IRQ bpviol CRC4 T2XXP (PCI) Card 0 Span 1 OK 0 0 0 T2XXP (PCI) Card 0 Span 2 RED 0 0 0 On Thu, Apr 2, 2009 at 9:40 PM, Martin <asterisklist at callthem.info> wrote: > That's very strange ... the code when is

Hello there: I think I have a silly kernel configuration problem. I'm running: * vanilla 2.6.27.10 kernel built from source * dahdi-2.1.0.4 built from source So far so good, dahdi module loads just fine: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.4 when I try to: hal04 dahdi # modprobe dahdi_dummy FATAL: Error inserting dahdi_dummy

I updated Asterisk to 1.6.2.7 and now the user introduction in the meetme application is no longer working: [May 27 09:26:51] WARNING[2407]: channel.c:4034 ast_request: No channel type registered for 'DAHDI' -- Created MeetMe conference 1023 for conference '800' [May 27 09:26:51] WARNING[2407]: app_meetme.c:3640 find_conf: No DAHDI channel available for conference, user

Usually I used real Digium cards in asterisk systems, so I'm running into this for the first time. dahdi_tool reports that dahdi_dummy is in state UNCONFIGURED. This isn't super surprising, as it seems like the configuration files for DAHDI are really intended only for configuring real physical cards. But that begs the question: Is there any legal DAHDI configuration for dahdi_dummy such

Hi, Regarding the discussion of gateways, Can the Vyatta routing software and/or hardware appliance solution help? (The software is open source and available.) http://www.vyatta.com/documentation/datasheet.php http://www.vyatta.com/documentation/general/Vyatta_FAQ.pdf http://www.vyatta.com/products/vyatta_software_datasheet.pdf http://www.vyatta.com/documentation/index.php Download

Hi, I need to run ztdummy for Paging, but now that this is all become dahdi I don`t really know where to start. I did build dahdi before building asterisk, but that`s it. I find it hard to find any documentation referring to dadhi instead of zaptel. I have no Digium hardware, but I still need the ztdummy timer (or whatever it`s called now). How do I get myself going? Regards,

Hi to all. I'm trying to use meetme on asterisk 1.4.22.1. On a debian i've compiled (as i need h323 support) openh323_v1_18_0 pwlib_v1_10_0 dahdi-linux-2.1.0.3 dahdi-tools-2.1.0.2 asterisk-1.4.22.1 All works fine, dahdi status is: asterik:/data/programmi# /etc/init.d/dahdi status ### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER) asterik:/data/programmi#

sort of standard for getting media players to support dynamically mixing different tracks and also making it easy for artists to do. On Mon, Aug 18, 2008 at 7:09 PM, Andy <andycool22 at gmail.com> wrote: > i'll chime in and say that i would love to get music recorded in > separate tracks, maybe there would be some kind of settings embedded > in the files so i could hear them

sort of standard for getting media players to support dynamically mixing different tracks and also making it easy for artists to do. On Mon, Aug 18, 2008 at 7:09 PM, Andy <andycool22 at gmail.com> wrote: > i'll chime in and say that i would love to get music recorded in > separate tracks, maybe there would be some kind of settings embedded > in the files so i could hear them

sort of standard for getting media players to support dynamically mixing different tracks and also making it easy for artists to do. On Mon, Aug 18, 2008 at 7:09 PM, Andy <andycool22 at gmail.com> wrote: > i'll chime in and say that i would love to get music recorded in > separate tracks, maybe there would be some kind of settings embedded > in the files so i could hear them

I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and installed dahdi-2.2.1. kernel modules loaded. lsmod | grep wctdm wctdm 37233 0 dahdi 194985 1 wctdm lsmod | grep dahdi dahdi 194985 1 wctdm crc_ccitt 1549 2 dahdi,isdnhdlc dmesg: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.2.1

Hi. I have a Debian Leni system with asterisk-1.8. I was trying to get meetme to work and it depends on dahdi, so I compiled dahdi-trunk and dahdi-tools-trunk, however, when trying to insert dahdi_dummy, it complained about symbol crc_ccitt_table, although the module was actually there in the kernel tree. So, I took the Debian source, and I had the config and I did make Bzimage, make modules

Hi guys, I'm currently playing around with optimizing an Asterisk install (trying to remove as many possible configuration files as possible) for testing and debugging purposes. I've been able to remove most of the files and maintain an error-less Asterisk full file, with a single exception: I can't seem to remove `chan_dahdi.conf` without having Asterisk complain in the full logs:

Howdy, I am playing around with asterisk within an LXC container on Ubuntu 11.04. I have asterisk (1.4.42) running fine, but want access to dahdi_dummy for timing (meetme). I have dahdi installed on the "host", and dahdi_dummy is loaded: root at astnorth:/# ls -ltr /dev/dahdi total 0 crw-rw---- 1 root root 196, 250 2011-06-08 13:59 transcode crw-rw---- 1 root root 196, 253

Hi, I have some servers that are dedicated to do meetme conferencing. From some previous test i concluded that I need to use dahdi_dummy as it is more accurate. If I did use the core timers in dahdi (not loading dahdi_dummy) I got bad quality in the conferences and dahdi_test showed 99.6% as worst. I thought maybe the issue as bad hardware for the timing or something else. But today I

Hello I was editing files manually, and noticed that if I include the familiar "fxsks=1" in /etc/dahdi/system.conf, Dahdi fails loading: ===================== # cat /etc/dahdi/system.conf loadzone = fr defaultzone = fr fxsks=1 ===================== # /etc/init.d/dahdi start Loading DAHDI hardware modules: wctdm: [ OK ] /usr/share/dahdi/waitfor_xpds: Missing

I am having problems getting a Nicherons TDM400P wildcard clone to dial out. Everything appears to be configured correctly, but although I see call progress, it never seems to actually pick up the phone. (The following is a test of 911 emergency, where I substitute 811 [repair service] as the actual number dialed.) *CLI> -- Executing [911 at from-internal:1]

Hello all, Ok it is Sunday afternoon and I am going crazy. I have been running in circles so long that I can't think straight. As an example, I sent this message to the wrong address the first try, AAARRRRGGGGGGHHHHH. I have Asterisk 1.6.0.6 and DAHDI Tools Version - 2.1.0.2, DAHDI Version: 2.1.0.4, OpenSuSE 10.3 x86_64, tdm422 at the end of installing dahdi-linux and dahdi-tools I get: