Displaying 20 results from an estimated 700 matches similar to: "No subject"
2010 Jun 22
3
PRI span problem - no D channel
Hi,
I have the following happen to me after the restart of one of my servers:
out of my 3 PRIs (all configured with the same technical settings), the last
one isn't coming back. It's underutilized (chances it didn't get a call
since my reboot), if it makes a difference .
The PRI goes from provisioned to unprovisioned, and I get this regularly:
[Jun 22 09:03:48]
2007 Jun 06
3
1.4 Zaptel/Sangoma Issues on CentOS
Any ideas? Sangoma support is closed for the evening.
I have the latest Sangoma drivers and Asterisk 1.4 everything installed.
When I fire up asterisk, I keep getting "Primary D-Channel on span 1 up"
repeated over and over. The B channels never come up. There are no
errors in any of the logs, zttool, or the wanpipe tools.
Intense pri debug output:
< Unnumbered frame:
< SAPI:
2008 May 04
1
UK BT ISDN30e PRI Problem
Ok Guys, I've done a tonne of hunting around on this problem, but
can't find much help.
I'm running:
asterisk 1.4.19.1
libpri 1.4.3
and zaptel 1.4.9.2 which I believe has been modified by RedFone to add
the ztd-ethmf module.
My interface is a RedFone foneBridge2 4 Span; and I'm connecting to a
BT E1 PRI / ISDN30e with 15 lines on span 1, and a legacy Panasonic
PBX on span 4. Upon
2007 Oct 02
5
PRI Setup problem
Hi everyone,
I'm trying to get a Sangoma A101D-X card talking to a Sasktel PRI
(Megalink) circuit and having some trouble getting it to handshake.
Thanks for any help or suggestions to diagnose this problem.
The problem is that Asterisk has trouble bringing up the link. I see
the following lines every couple of minutes:
== Primary D-Channel on span 1 up
== Primary D-Channel on
2009 Nov 30
1
DAHDI - BRI - Astribank
Hello List,
it is a very long time since I wrote here.... It has been still in
Zaptel times....
Today I am run into a related problem: I can't get a DAHDI setup to
work 100%. I am configuring an Astribank XR00013 (BRI, two ISDN ports).
At some degree the installation (latest DAHDI drivers, Asterisk
1.6.0.18 on Centos 5.x) works.
I can get incoming calls to the dialplan context that is
2009 Mar 26
2
PRI dropping #2
Hey,
I wrote yesterday about PRI dropping, which turned out to just be a
regular reset of unused B-channels. This time there's a real issue. As
noted earlier I have an ISDN-30 connection, a Digium TE-121 with
VPMADT032 echo cancellation. These are my configurations files:
== /etc/zaptel.conf
loadzone=dk
defaultzone=dk
span=1,1,0,css,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
==
==
2009 Jan 16
0
No subject
"RED: Loss of signal (LOS): The equipment shall assume "loss of
signal" when the incoming signal amplitude is, for a time duration of
at least 1 ms, more than 20 dB below the nominal amplitude. The
equipment shall react within 12 ms by issuing AIS."
This sounds like what is happening, and is in order with what one of
the technicians said - I was about 20 dB below their
2009 Jan 16
0
No subject
"RED: Loss of signal (LOS): The equipment shall assume "loss of
signal" when the incoming signal amplitude is, for a time duration of
at least 1 ms, more than 20 dB below the nominal amplitude. The
equipment shall react within 12 ms by issuing AIS."
This sounds like what is happening, and is in order with what one of
the technicians said - I was about 20 dB below their
2009 Oct 31
0
PRI line resetting on incoming call
Was'nt sure if this mail got through earlier:
I have been having a weird issue with my telco's ISDN PRI occasionally
resetting on a incoming call, i suspect it to possibly be a timing issue
since some of the incoming call work. This problem happens very frequently.
I am using asterisk-1.6.0.1 with libpri-1.4.9, the asterisk server is
connected viw TDMoE to a Redfone Fonebridge into
2010 Apr 10
2
t200_expire: q921_state now is Q921_LINK_CONNECTION_RELEASED
Hi everyone.
We have a problem here... Hope somebody can give us some hints.
We have a HP ProLiant DL180 G6 Server with a Debian/Lenny sytem.
Asterisk 1.4.21.2 (1.4.21.2~dfsg-3+lenny1) with zaptel (1.4.11) and
libpri (1.4.3) is installed.
There is a QuadBRI-Card installed:
# lspci -vv -s 06:04.0
06:04.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)
2009 Apr 03
1
ISDN Timer T309
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi everione,<br>
<br>
I'm make some test with pri timer T309. I'm using asterisk 1.4.23.1,
libpri 1.4.9, dahdi-linux 2.1.0.4 and dahdi-tools 2.1.0.2. But in my
tests, the timer fail with a telco
2014 Aug 01
1
Connecting Asterisk and BT Versatility PBX via NT BRI port
Hi All,
I've a BT Versatility PBX that I want to connect to my asterisk 11.9.0 box via BRI port in NT
mode but actually I wasn't able to get it working. I've another standalone PBX, it's a
Panasonic model, which works fine connected to the same port. The BT connected to a UK
BT BRI line works quite fine after roughly a minute once connected. The PBX can be
seen at
2011 Oct 16
0
PRI E1 call termination issue
Hi List,
I have configured TE121PF card in E1 mode. I am using asterisk
1.6 and freepbx 2.7. My card staus turn in to green and looks like sync with
the service provider. My service provider is BSNL - India. I have one toll
free number for incoming and one land line number for out going calls.
Problem :
If i am calling to the toll free number, i am getting the ring but that call
is
2004 Apr 01
1
quadBRI card installation issues
Hi there,
I am attempting to set up a simple BRI and SIP based platform using *
with the quadbri card (it's not sharing an IRQ). I enclose my zaptel and
zapata.conf files. For the inital test I'm simply trying to connect to
the * demo menu.
The drivers compile (with a few warning that I believe aren't important
- see attachments). chan_zap comiles with the warning:
chan_zap.c:
2011 Mar 18
7
One PRI card with 2 (or more) Telcos
Hi list!
We currently have a PRI gateway composed by a box with two Digium quad-span
PRI cards (a TE420 and a ).
One of the cards is filled with TELCO1, while the other has first two slots
filled with TELCO2, and 3rd slot with TELCO3.
I am currently having (timer ?) issues on TELCO3 (span 7)
D-Chan (202 as determined by dahdi_genconf ) is constantly failing causing
on-going calls to terminate.
2011 Oct 19
1
Problem E1 PRI
Hi,
I'm having problems with a new ISDN PRI in a new server.
The cable is connected and the E1 modem seems to have issues with
syncing (blinking light on the modem).
versions: CentOS 6, asterisk 1.6.2.20, dahdi 2.5.0.1, libpri 1.4.12
------------------------------------------------------------------------------------
dahdi show status
T4XXP (PCI) Card 0 Span 1 RED 0
2009 May 22
2
BT ISDN-30 Pri getting 'stuck' on outgoing calls.
I've having problems with a BT 2 span ISDN-30/Digium TE205P asterisk
setup with outgoing calls not completing and requiring an Asterisk reset
to 'unstick' span 1.
Sorry this is a bit long but I'm completely out of my depth :-(
This system has been in use for some while and I recently upgraded it to
asterisk 1.4.24, zaptel 1.4.11 and libpri 1.4.9. I didn't change
2005 Feb 18
2
Asterisk + RedHat9 - Libpri problem
I install the Asterisk into a RedHat9, exactly like manual says, and I'm
having the attached error message when try to install libpri.
Please, help on it.
-------------- next part --------------
[root@LinuxLab zaptel]# cd ..
[root@LinuxLab src]# cd libpri/
[root@LinuxLab libpri]# make clean; make install
Makefile:93: .depend: No such file or directory
./mkdep -Wall -Werror -Wstrict-prototypes
2004 Jun 12
2
Sending SABME continuosly. Urgent help needed!
Hi, I'm trying to install an E1 PRI, and I need it working by
Monday, but although everything seems ok, I get no response to calls.
When I make a pri extense debug on span 1, I repeatedly get the
following:
Sending Set Asynchronous Balanced Mode Extended
[ 00 01 7f ]
Unnumbered frame:
SAPI: 00 C/R: 0 EA: 0
TEI: 999 EA: 1
M3: 3
2010 May 17
1
PRI down due to chan_zap.c: No more room in scheduler....Got SABME and Sending Unnumbered Acknowledgement...Any thoughts?
Hi Guys,
Running the following with a Sangoma A101D PRI card:
*Asterisk 1.4.21.2*
*LibPRI version: 1.4.10*
No inbound or outbound calls can be made. In fact Asterisk CLI doesn't show
any activity. Problem goes away on restart of the system or maybe asterisk.
I see post about upgrading Libpri to 1.4.10.2 and then I see posts that even
that didn't work. Anyone can weigh in this please?