similar to: No subject

Dear Alex; Thanks alot for your nice help. This is if I need to let Asterisk register with another softswitch (so I used register =>), what if I need asterisk to send call for the softswitch without register to it (directly)? If I removed the register => then how it will distiguish the IP address in the "host" at the [sip_trunk] is the IP address of the softswitch that need to

Greetings, I have a very basic equal-weight ring-all queue set up in queues.conf: [sales-queue] ;music = default strategy = ringall periodic-announce-frequency = 20 announce-holdtime = no timeout = 15 maxlen = 0 member => SIP/1xxxxxxxxxx at junction_networks,1 member => SIP/1xxxxxxxxxx at junction_networks,1 member => SIP/dude,1 member => SIP/homie,1 member => SIP/fellow,1 But

Dear List; I am trying to create a link between Asterisk and My softswitch, the link to be SIP Trunk. I did the below configuration and I do not know if any one can help me and advise me to have better configuration to be sure that link is fine. But I do not know how to determine the SIP username to be sent for my softswitch as sometimes the softswitch need to check it. Also, does asterisk

Hi List; I have a problem when trying to let an SIP ATA endpoint (got it from broadtel company), I am getting the following message: - Registered SIP 'bilal_sip" at 0.0.0.0 port 5060 expires 60 I do not know why it takes it 0.0.0.0 while it has an IP address (192.168.8.3). In the sip.conf, the following configuration to the bilal_sip done: [bilal_sip] type=friend context=internal

Hi All and my sincere thanks to Jakob and Joseph for your responses. I got around the nightmare for this site but it is far from satisfactory and given both Thunderbird, Roundcube and the Android e-mail client work perfectly as expected, this following links comments enforce what I experienced over the weekend: http://comments.gmane.org/gmane.mail.imap.dovecot/79231 I have not struck this

Yes Eric, Outlook also has a declaration that as of either version 2010 or 2013, they no longer download IMAP headers, they download the whole message - thank God for faster Internet connections these days - could you imagine that in the older dialup days? Still it is a waste of bandwidth and disk space to do this. I am so tired of how they claim to use the RFC and indicate they are

I am experiencing a "606 not Acceptable" error trying to set up an Asterisk server as an ekiga.net client. My server is behind a firewall with NAT routing. I have googled this problem and read about Asterisk feeding its local ip address to ekiga.net. That seems to be my problem. I tried putting stunaddr=stun.ekiga.net into the sip.conf file under [ekiga]. I also tried

Hi List; How can one Asterisk Box A to send a SIP call for another Asterisk Box B, and that call to be authorized based on the username and password, and not on the IP (as the IP address of the source is not known because it keep changing)? I think the trick in the Dial command, how to write it properly in a way that other Asterisk Box can recognize the sip username and password which are existed

different stand alone linux server which act as my routers. Here is a picture showing the output from the CISCO switch going to the two linux servers: http://www.grmtech.com/blog/wp-content/uploads/2009/02/cisco2950-24ports-farleft-two-output-300x89.jpg My questions are: 1. The black wire coming into the Mc Manstel box is that a fibre optic cable ? 2. What is the Mc Manstel box doing ? 3. What

On Tue, 27 Nov 2007, Alex Balashov wrote: > > Our provider gives us four PRIs as a trunk group hunt group. Meaning, the > provider's switch will cycle through B channels in span 1, 2, 3, ... until > it finds one that is available. > > I have moved spans 2-4 onto another machine. But we have one remaining > box with a PRI full of calls and I don't know what to do

Hi, I still have the same problem trying to configure ITSP failover in extensions.conf for a connected PRI. Any comments thoughts or direction would be greatly appreciated. I sympathize with wanting inbound DID failover. If we have a client with multiple DIDs we will spread them across two or three ITSPs so that all inbound connectivity will not be lost if one of them has an issue. I

I'm trying to move the asterisk server to an Amazon Web instance. We have teliax for our sip provider. I'd like for our DID lines to be connected to a users cell phone. Seems simple enough, but I'm getting the dreaded one-way audio, even with nat=yes everyplace I can think of. The dialplan is real easy: [from-teliax-sip] exten => _j.,1,NoOp("From teliax sip with exten

Bourvine, > > So, why won't we save the big bucks we pay them, hire two professionals > (who cost less) and support an open source code by ourselves? This way > we depend on ourselves only. > > > > Thanks, __Yehavi: I remember hearing University of Pennsylvania have been using Asterisk for sometime. I am not certain where I came across that

I am trying to send calls from (telx-NY17S) to (telx-nyc) via an IAX2 channel. However the call is being rejected on the (telx-nyc) server. See error below copied from telx-nyc CLI> Apr 22 13:56:57 NOTICE[147465]: chan_iax2.c:5390 socket_read: Rejected connect attempt from 192.168.0.251 I have icluded the following conf files 1. extensions.conf (telx-nyc) 2. iax.conf (telx-nyc) 3.

Hi All, I've got a realtime queue in place (strategy is "wrandom"), and have added a member dynamically via "queue add member ". My agent shows in the queue, but when he gets the call is not recognized as "In Use". Here is the output from "queue show" prior to the call: *CLI> queue show QUEUE_3 has 0 calls (max unlimited) in 'wrandom'

Hi List; I noticed that if I disabled secret in the context by placing ( ; ) before it, then at the asterisk the log will be: -- Registered SIP 'bilal_sip' at 0.0.0.0 port 5060 expired The IP address of the endpoint was not captured!!! Why? If secret enabled, then some endpoints can not register (maybe due to compatibility in reading the negotiation packets), so what is the solution?

Dear Philipp; Kindly find the part of the configuration as below: [general] allow=all disallow is comment by ( ; ). [bilal_sip] type=friend context=internal host=dynamic canreinvite=no dtmfmode=rfc2833 So where is the problem? The endpoint does not register and nothing appear on trace level 3. And the amazing thing that if the endpoint send wrong username (for example: bilal_sip100) then it

Hi All, I want to use Asterisk for VoiceMail for a softswitch. I can dial in to leave voicemail and retrieve. Now there are many SIP Endpoints registered to the Softswitch. The Asterisk is sending a NOTIFY msg to the Softswitch on <ip addr>:0 Somehow Asterisk Looses the port from where the INVITE came in, this NOTIFY msg is not going out of the Asterisk, I cannot see in Ethereal.

In the Perl FastAGI API, how does one set the port the service runs on? [root at donkey queue_login_arbiter]# perl arbiter_agid.pl 2007/12/06-17:16:27 Evariste::QueueMemberArbiter (type Asterisk::FastAGI) starting! pid(31737) Port Not Defined. Defaulting to '20203' Binding to TCP port 20203 on host * Group Not Defined. Defaulting to EGID '0 10 6 4 3 2 1 0' User Not Defined.

I was cleaning and working on laptops most of the day. Check my logs, I did plenty of work. -----Original Message----- From: "asterisk-users-request at lists.digium.com" <asterisk-users-request at lists.digium.com> To: "asterisk-users at lists.digium.com" <asterisk-users at lists.digium.com> Sent: 11/29/2008 1:13 PM Subject: asterisk-users Digest, Vol 52, Issue 81