similar to: CONSOLE=Phone/phone0 and CONSOLE=Console/dsp and Zap/g2

I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal ---------------- No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone,

Hi List; I need to configure a softphone to be client and use it with Asterisk, which is the recommended one? Is it iax2? Regards Bilal ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.

Dear List; I am trying to create a link between Asterisk and My softswitch, the link to be SIP Trunk. I did the below configuration and I do not know if any one can help me and advise me to have better configuration to be sure that link is fine. But I do not know how to determine the SIP username to be sent for my softswitch as sometimes the softswitch need to check it. Also, does asterisk

Hi List; I did yum install kernel and yum install kernel-devel, now when I type 'uname' -a I have the following: [root@localhost /]# 'uname' -a Linux localhost.localdomain 2.6.15-1.2054_FC5smp #1 SMP Tue Mar 14 16:05:46 EST 2006 i686 i686 i386 GNU/Linux And when I type rpm -q kernel, then I have the followig: [root@localhost /]# rpm - q kernel kernel-2.6.20-1.2319.fc5 So the

Hi List; If I am configuring Diguim Analoge card, then I need to run #modprobe wctdm, but the question why I need to run #modprobe zaptel also? What #modprobe zaptel does a things that #modprobe wctdm does not do? Any help? Regards Bilal ____________________________________________________________________________________ Looking for a deal? Find great prices on flights and hotels

Hi All; Anyone can advise for a good IP Phone that has the ability to support SIP firmware and IAX firmware? Ofcourse, SIP there is a lot, but we need also the ability to use IAX (as it is good for NAT). Any advise. Regards Bilal ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo!

Hi List; [incoming] include => parkedcalls exten=103,1,Dial(SIP/Bob,,tT) exten=104,1,Dial(SIP/Charlie,,tT) When we use tT and when we use t alone or T alone, I know this for call parking, but I do not know what the tT does? Regards Bilal ____________________________________________________________________________________ Sucker-punch spam with award-winning protection. Try the free

Hi List; What is the difference between WaitExten function and TIMEOUT (response)? As I see that both are used to determine the allowed time to enter the digits, any one can advise? Regards Bilal ____________________________________________________________________________________ Shape Yahoo! in your own image. Join our Network Research Panel today!

Hi List; How can I configure asterisk to receive a call from SIP end point without being registered at asterisk and its IP address is dynamic, and authentication to be based on the username and password or any other string? I know that if I place the host with static IP then no need to register, but what if the voip gateway was having dynamic IP and I do not need to register on asterisk, but I

Hi List; My Asterisk version is 1.4 and I am trying to use the ResponseTimeOut() application to control the response time of the Background function, but when the running arrive for the ResponseTimeOut() then the call drop and my debuging says: No Application 'ResponseTimeout' for extension (Test_Bilal,s,3) Spawn extension (Test_Bilal,s,3) exited non-zero on 'Zap/1-1' Hangup

Hi List; Where I determine the codec to be used for the SIP Trunk (between Asterik and another SIP softswitch)? Regards Bilal ____________________________________________________________________________________ Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out. http://answers.yahoo.com/dir/?link=list&sid=396545433

Hi All; I do not know if anyone faced such case in dealing with open vpn (as we need it for fring to be used from the mobile: Which mobile can be used to install the open vpn client on it, so we can use it to do a vpn channel with the server that has open vpn server? Regards Bilal

Hi List; I am trying to use wiki via the link (http://www.voip-info.org/wiki/index.php?page=Asterisk) in effective way to find the needed resource for me, but still it is hard to arrive for the needed information. For example: what is the best (shortest) way to search for information related to the command playbak()? Using the backlines, it make the eyes feel hard by keep reading without

Hi Danny; Really I did not understand how I can determine if the IO will be DB or conf files? Is it from the Asterisk manager? Regards Bilal ------------------------- It depends on how you are configured. The gui interfaces using Asterisk Manager, so you get the Same IO from the gui that you would get from a native manager session. -----Original Message----- From: asterisk-users-bounces at

Hi All; Anyone knows if there is an Asterisk version that setup can be stored in Database instead of the configuration files (.conf)? Any advise? Regards Bilal

Hi List; How can one Asterisk Box A to send a SIP call for another Asterisk Box B, and that call to be authorized based on the username and password, and not on the IP (as the IP address of the source is not known because it keep changing)? I think the trick in the Dial command, how to write it properly in a way that other Asterisk Box can recognize the sip username and password which are existed

Hi All; Till now I am not able to find a good IAX IP Phone or Gateway that can be used with good quality. Anyone can advise for good one? Regards Bilal ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.

I want * to answer the phone when call comes-in. I've enabled /dev/phone0 in phone.conf and created /dev/phone0 with a command: mknod /dev/phone0 c 100 0 Though, when I start * I get: Parsing '/etc/asterisk/phone.conf': Found Sep 12 00:18:42 WARNING[16384]: chan_phone.c:950 mkif: Unable to open '/dev/phone0' Sep 12 00:18:42 ERROR[16384]: chan_phone.c:1141 load_module: Unable

Hi All; I discover that most of the voice cutting complain are coming from the Internet bandwidth when we are connecting two remote offices togethor via Asterisk or any other IP PBX. Anyone has an idea on a ADSL router that work as ADSL + Bandwidth division? So we can resolve the problem of providing a guaranteed bandwidth for the voice packets instead of suffering the voice cutting? Regards

Hi List; I read the following sentence: "The CLI prompt is set with the ASTERISK_PROMPT UNIX environment variable" In the following link: http://www.voip-info.org/wiki/index.php page=Asterisk+CLI+prompt The question is: what is the ASTERISK_PROMPT UNIX environment variable and where I can access it to change it? Also where I can find information about it? Regards Bilal Ghayad