similar to: Query

Hi all, Can anybody tell me that wether I should install DIGIUM-TE120P card on redhat9.0 2.4.20-8 or 2.6.18 kernel. I am using kernel 2.6.18 but facing a very serious problem of modutils and iptable. Can anybody help me out. Thanx and Regards sanchal singh

Hi, I am facing problem in configuring D-channel for TE120P card.I did the following things /etc/zaptel.conf span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 /etc/asterisk/zaptel.conf group=1 signalling=pri_cpe

Hi, I have successfully configured DIGIUM card and successfully communicated through it to the another E1 card running application. Can anybody tell me does TE120P support MFC/R2 protocol. Thanks and Regards sanchal singh

Hi, I am able to dial through asterisk PBX having TE120P card to E1 card running application. Communication was established successfully Now, I want to do the reverse way out. I am using the following configurations 1)zaptel.conf span=1,1,0,ccs,hdb3,crc4 defaultzone=us bchan=1-15,17-31 dchan=16 2)zapata.conf group=1 signalling=pri_net switchtype=euroisdn context=incoming

On 8/23/07, sanchal.singh at alliance-infotech.com Hi, I am using debian 4.0 with version 2.6.18-4-686 I have downloaded the required files form site asterisk-1.2.24.tar.gz libmfcr2-0.0.3-1.4.tar.bz2 libsupertone-0.0.2.tar.gz libunicall-0.0.3-1.4.tar.bz2

Hi, I am using debian 4.0 with version 2.6.18-4-686 I have downloaded the required files form site asterisk-1.2.24.tar.gz libmfcr2-0.0.3-1.4.tar.bz2 libsupertone-0.0.2.tar.gz libunicall-0.0.3-1.4.tar.bz2 spandsp-20060903.tar.gz I downloaded and installed the files in the follwing sequence spandsp libsupertone libunicall libmfcr2-0.0.3 is

Hi, I have successfully configured DIGIUM card and successfully communicated through it to the another E1 card running application. Can anybody tell me does TE120P support MFC/R2 protocol. Thanks and Regards sanchal singh

Hi, I am trying to configure for MFC/R2 for asterisk. With the help of one of the asterisk users group member patrick I am able to install libunicall library. Now, when trying to install libmfr2-0.0.3 it is giving error. On running running command $./configure It is giving error -> can't build without libtiff I downloaded tiff-3.8.2 and installed the libraries but still

Hi, I am using Asterisk 1.4.25. I have one Broadvoice account. I Integrated this broadvoice account with Asterisk Server. I am Able to Make calls but cannot recieve calls. In Incoming calls, call lands to SIP extension, as I attend the call....It gets hungup......... If i dont transfer this call to extension or I play any file then it works OK. But as I transfer it to SIP Extension it get

Hi, I'm having some trouble setting up a Xorcom Bri 4 port. I have compiled asterisk and zaptel using the Bristuff bristuff-0.3.0-PRE-1y-g patches. So I'm running zaptel-1.2.17.1 and asterisk-1.2.18. The problem I'm having is that for one I get no LEDs showing if the unit is in TE and NT mode (not a issue for me but may have some impact on things) I have no errors in any logs I

Hello, I'm just starting out with asterisk and I'm playing around with the system. Currently I have a Digium TE210P connected to a PRI on the Asterisk server. I have a SIP soft phone on my laptop for testing that is working fine. When I try to place a call from my soft phone I get this from Asterisk: May 1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to create

hello all, i'm using TE110P and all configuration prosess is done. but after i do the 'modprobe' for zaptel and wcte11xp, follow by ztcfg -vv and asterisk -vvvgc i have this error. *CLI> May 27 14:44:33 WARNING[3059]: chan_zap.c:8534 pri_dchannel: PRI Error: We think we're the network, but they think they're the network, too. May 27 14:44:34 WARNING[3059]: chan_zap.c:8534

Is anybody else using the following combination: * a TE410P card (wct4xxp driver) * a BT ISDN connection * DAHDI 2.3.0.1 * Asterisk 1.6.2.9 I'm trying to configure a new box to replace a legacy system (same hardware; some old version of Asterisk with Zaptel; works lovely but hopelessly out-of-date) and not having much joy. Specifically, I couldn't get it to see a D-channel on

Hi Sir, We have integrated Skype with Asterisk (skype user id:- rexesbposolutions). Each call which is coming to skype account is getting transfered to Asterisk Queue. It has following two cases: case 1: When we call from normal skype account to skype account (rexesbposolutions), everything is working fine. case 2: This skype account (rexesbposolutions) has been assigned with a online virtual

Hello- After configuring DAHDI and starting asterisk, I get the following message continuously on the Asterisk console: WARNING[2057]: chan_dahdi.c:4158 pri_find_dchan: No D-channels available! Using Primary channel 16 as D-channel anyway! My card is a D410P configured for E1, only the first span is configured, and configuration snippets are as follows: From /etc/dahdi/system.conf:

Hi, For a significant time now (since about 0.2.0-rc8n) the qozap driver has become very verbose if an ISDN line is not connected... I get the messages below every couple of seconds in the asterisk logs. The "flaw" in the messages is the "Alarm cleared" message - The alarm cannot possibly be cleared because there is no physical media connected into that port!!! (BTW - All

Hi all, I have 1 Card Digium TE412P and 2PRI E1. I have more problems with drops lines. The asterisk log is this: May 16 10:52:26 NOTICE[4465]: chan_zap.c:8194 pri_dchannel: PRI got event: Alarm (4) on Primary D-channel of span 1 May 16 10:52:26 WARNING[4465]: chan_zap.c:2287 pri_find_dchan: No D-channels available! Using Primary channel 16 as D-channel anyway! May 16 10:52:26 NOTICE[4465]:

HelloI have the following system Asterisk 1.6.1dahdi 2.2.0.2 TE420P card Centos I have noticed that all the four lights are blinking(ie coming red and then off so on)... Previously I also noted that when dahdi drivers are not installed lights blink but one by one in sequence(like in marriage cermonies :P) and after dahdi installation lights get off ... but this time all at same time

Hi, I want to unsubscribe from asterisk-users-request-lists, and donot want to recieve mail any more. Kindly unsubscribe me... sanchal singh On Mon, 2006-12-18 at 13:57, asterisk-users-request@lists.digium.com wrote: > Send asterisk-users mailing list submissions to > asterisk-users@lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, visit >

Dear all I have now install TE210P 2 port E1 card on asterisk 1.4.10 on centOS 5 but thing is that i have connect 1 E1 port with avaya E1 back 2 back and second E1 card on Direct Telcom for outgoing for outside now i got this error when i call on avaya PRI asterisk think PRI_CPE and remote end also CPE i have configure /etc/zaptel.conf span=1,1,0,ccs,hdb3