similar to: Redundancy / Failover

Hi, I'm wondering what the best option to obtain a high availability asterisk server is. I currently use a TE410P (4 x E1) card. I'm thinking of 2 different solutions: - 2 servers configured with Heartbeat + DRBD (drbd mainly for voicemail....) and the E1 span plugged to the 2 servers (with a TE410P in each server). - 2 servers configures with Heartbeat + DRBD with the E1 span hooked

For high-availability Asterisk when using PRI Lines, you might also want to check out our product (FSV-4PFS). It's available at www.failsafevoip.com Bill Also to add to the last post does this device have hardware echo cancelation? if it does it could be a great replacement, if not may not be what I'd really want to use. Thanks, tom I've been looking at the RedFone foneBRIDGE2

First, Something seems to be wrong with the list. I'm not the only person who has expressed seeing their messages either arrive late, or not at all. With that out of the way.. Is anyone aware of any type of failover device for PRI on asterisk? I've found the ISDNGuard, however it is currently not made in the U.S., nor does it run on U.S. power. Is anyone aware of a device that will

On Mar 19, 2008, at 1:00 PM, asterisk-users-request at lists.digium.com wrote: > Am I expecting too much? Perhaps. I think the hardware on which we run Asterisk can be much more reliable than the software, which is often the case. We have a bunch of HP servers with RAID and have never lost anything. A HD may fail, but the RAID keeps it going until we pop a new drive in there. A

Is anyone aware of a service where we can lookup phone numbers to determine a name and/or name + address available in bulk? We want to look up every number called to our call center, so it will be tens of thousands per day. Services that charge 3 to 5 cents per lookup will get way too expensive very quickly. Thus, I'm looking for a service that can either license a database or

I'm trying to understand something that just doesn't seem to compute. How can companies like Cisco justify selling their hard phones for as much as they do? I know there is a matter of recouping R&D costs but when you look at the iPhone with all its amazing features for less than $500.00 it just doesn't make sense. Am I the only one that thinks this? Roy Anciso Director of

What does it take to get ztdummy to work correctly? I have a new laptop HP HDX9200. I am running asterisk 1.4.19 and zaptel 1.4.9.2 Zaptel compiles fine. asterisk compiles fine. ztdummy loads asterisk runs. Problem is playback() does not work. So then I stop zaptel, asterisk runs and playback() now works. However, meetme()'s dont work. I need ztdummy I'm pretty sure for that. I am

Hello All, We have been experiencing some ongoing reliability problems with Asterisk for quite some time, and I am trying to find out if anyone else has experienced the same problems. We are running asterisk 1.4.17~dfsg-2+b1 on Debian Lenny, with a Digium PRI card, and have approximately 120 sip peers, mostly Snom 360s, with a few Grandstream GXP2000 and a handful of Handytone 486 units. The

Hi * users, I would like to extract the information present in the SIP REFER message that comes to asterisk. Would SIP_HEADER() allow me to do that ? I have used SIP_HEADER() for extracting the to and from SIP headers previously. Thanks Regards -- Arpit Mehta Graduate Student Department of Computer Science Columbia University Tel: 1-646-387-5998

I'm scoping out HA for a relatively simple Office/Call Center PBX. Current setup uses a TE412P with 4 PRI our telco with SIP hard/soft phones for users. Some outbound also goes to a SIP provider. Active/Active looks to be too much hassle for an installation this size, so we're looking at adding an extra * in an active/passive configuration with Linux-HA in between them. Does anyone

Hi, I'm using heartbeat as a failover for my asterisk server. on the active server 1 i have 10.10.10.1 eth0 10.10.10.3 secondary eth0 asterisk listens to the secondary ip, so that if server 1 fails, server 2 will then get that IP. so if server 1 fails, server 2 will have the IP 10.10.10.2 eth0 10.10.10.3 secondary eth0 problem is i have to bind asterisk to the secondary IP if dont, i

We have been running around than 40 asterisk servers running on Debian Squeeze for last three years, handling traffic of more than few hundred thousand calls per day. Our setup's PRI-banks were using Redfone's Fonebridge. We had PRIs from multiple telephony providers. And Redfone's Fonebridge handled all that easily. But all good things come to end. Redfone's Fonebridge was not

I am looking for input on wether the 4 port T-1 foneBridge is a useful device in a asterisk deployment. Would it be better to loadup a extra asterisk server to trunk the T-1's via IAX or is TDMoE safe in production enviroments. We are only looking at 2 T-1's, one for pstn and the other to a channel bank. Any advice? Bruce Reeves Nortex Networks -------------- next part -------------- An

I've had it with Dell server garbage. They seem to change RAID controllers as much as I change socks, and then the controllers don't work with Linux, unless you load a new driver. They sell servers with a PCI-e slot in them, but then you get it and find out the RAID controller is using the PCI-e slot! Their sales folks are dumber than rocks, and they change them more often than I

Dears Any one succeeded to make Redundancy / Failover with asterisk 1.4.9 on centos with kernel 2.6.9-55.EL. Can you please send me the documentation link on how to or write down how to . Regards ********************************************* No employee or agent is authorized to conclude any binding agreement on behalf of Xplorium with another party by e-mail without

There seems obviously quite a lot of possible setup for server clustering and redudancy, but let's say considering about three mid-range servers only with FoneBridge --- What could be the best way to setup Auto Failover Redundancy for Vicidial with Asterisk on CentOS or other Linux OS? Sam -------------------------------------------- www.SamAcosta.Net -------------- next part --------------

All too common and largely undocumented. I had this same problem. Installing ztdummy changes Asterisk to use it for timing of playback, apparently. Removing ztdummy "fixed" the problem. To get it all to work, I had to upgrade to to at least kernel 2.6.23.11 (previous versions are either missing options are just broken.) After doing this, I recompiled ztdummy and it worked. Note

>> All too common and largely undocumented. I had this same problem. >> >> Installing ztdummy changes Asterisk to use it for timing of playback, >> apparently. Removing ztdummy "fixed" the problem. To get it all to >> work, I had to upgrade to to at least kernel 2.6.23.11 (previous >> versions are either missing options are just broken.) > >

Hello all, i read a few articles online about the possibility to setup a "buzzer" door system to PBX using asterisk! currently my setup contains asterisk of course, and a sipura 3102.. what do i need to get such a feature done?! or should i ask if its possible?! _________________________________________________________________ Connect to the next generation of MSN Messenger?

Hello List Does anybody have any experience with the FoneBridge line of products from RedFone? I think their HA implementation sounds interesting, and like the prospect of having dedicated hardware for our PRI connections. Kind Regards Jon Leren Sch?pzinsky