similar to: blind transfer on hook-flash from SIP phone

Kevin P. Fleming wrote: > This is because hook-flash support is in chan_zap, not in the core of > Asterisk. There is no need to support hook-flash on any other channel > type, because every other channel type supported by Asterisk has its own > (more reliable) methods of signaling. I'm seeing many discussions on how to provision Blind Transfer, Attendant Transfer and Call

In features.conf, I have uncommented the transfer features under feature map, but I still cannot transfer using a POTS phone on an IAXy adapter. I think I am missing something here.... Any help is appreciated. Here is features.conf: ; ; Sample Parking configuration ; [general] parkext => 700 ; What extension to dial to park parkpos => 701-720 ;

Hi all, I have some problems configuring the right behaviour of Zaptel devices in asterisk. Especially with three way call, call waiting and call transfers. Having one party on hold and the other on line I would like to have - Flash Hook + 3 to activate three way call - Flash Hook + 2 to swap between user on hold and user on line. On call waiting I would like to have: - Flash Hook + 2 to

List, Having a little trouble with the following. Let me prefix by saying I have blind transfers working from the following setup. Inbound call [from-zap] (SIP/sv0071iv) answers. Zaptel -> Asterisk -> SIP extension SIP extension then blind transfers [from-sip] --- SIP extension -> Asterisk -> Zaptel During this whole process, the original channel off the trunk (lineside T1) is

I've been unable to figure out how to make blind xfer transfer a call on a zap interface by using hook flash instead of a native bridge. Is this even possible to change how a blind xfer works on the 7940s? zapata.conf: threewaycalling=yes cancallforward=yes transfer=yes

Hi List; I need to do a call transfer using analoge phone connected to fxs, but I do not need this to be done using flash hook, let it to be using the # or * or any code, but how I can configure that this code is for transfer? Also, I do not need the flast hook to be used for trasfer as it cause usually a confusion to distinguish between the hangup and the call transfer. Any advise? Regards

Hi there, I have a x100p card in an asterisk box. Does anyone know if it's possible to do a hook flash / recall on an active zap channel? On what I'm trying to do... >From an ordinary analogue pstn telephone I can call someone, press recall, call someone else, press recall 3 & presto we're on a three way chat, with me only using one line - using the telephone company's

I know this isn't an asterisk thing, but since the recommendation to get one came from here I figure lots of people out there have one. I read the docs, and it says that in order to do a blind transfer I should hit "flash", then dial "*__" then the number. Now, how on a normal phone do I dial "asterisk underscore underscore"? Can someone tell me how doing a

Hi I'm having 2 strange problems (or rather I am doing it wrongly!) ..need some help.I am working on trixbox 2.6 with Asterisk 1.4.22 1. I've a Queue with dynamic agents (ampextensions=deviceanduser mode in amportal.conf), some of agents when they punch in the wrong UserID - they still get logged onto the Queue as a result many of them complain that they don't receive calls on

Hello list, I was looking for a way to implement non-blind call transfers with *, i.e. the usual behaviour of most PBXs when pressing the flash button: - A and B are talking - A pushes flash - A is free to compose a new number - B hears music on hold - A's call is answered by C - A hangs up - B and C are in conversation As much as I can understand, * only supports blind transfers, where if

Hi All, I have working asterisk version 1.4.24. I have a blind transfer issue with grandstream bt200. I have updated the latest firmware to the phone. The phone is sending the *refer* to asterisk but asterisk is not able to connect with the another call that i have checked in sip debug. I am using transfer button of the grandstream phone. Can anybody provide help for this issue? Thanks in

Good morning folks, I am quite new to Asterisk but have successfully set it up with some BRI lines, Cisco 7940/7960, queues, voicemail, XML stuff and the flash operator panel. When playing with the manager API to get some stuff integrated within our systems, I stumbled across the Redirect command and the way it is working. Generally, there is a difference between Transfers and Blind Transfers of

Hi BK - >> The blind transfer does not work. >> >> The way we try to blind transfer a call: >> 1. answer the call >> 2. press transfer >> 3. press blind softkey -> the display shows "Blind transfer to:" and >> cursor is in the second line >> 4. enter the number -> when we enter the second digit of the number >> the

Hello, Sorry for a bit of a newbie post but we all had to start somewhere right .. I'm wondering if someone can briefly explain the difference between blind and attended transfers and why they would generate two very different CDR entries.? From my own research, it seems that transfers are both ultimately a SIP REFER and thus seeing two different CDR entries just confuses me further.

Hello. I'm trying to transfer calls from an analog phone (Zap/1, TDM400P card) to some other terminal connected to my Asterisk PBX. If I make a flash hook pressing the phone hangup button quickly it works as expected, I get a new dialtone and the other side is put on hold. But I would like to use my phone's "R" key instead for some different reasons (it's quite easier to use

Hi, I setup an asterisk system (version 1.8.0-rc5). While using a SIP only environment I discovered a problem using blind transfer. The phones are SNOM or Aastra and are using the SIP REFER Method. The following is working: User A calls user B, B accepts the call, user A than transfers to user C The following is NOT working: User A calls user B, B accepts the call, user B than transfers to user

On Thu, March 5, 2015 05:30, Ruben R?gels wrote: > > > Am 05.03.2015 um 01:09 schrieb James B. Byrne: >> I am trying to determine how the transfer button on the Snom-870 >> works >> with Asterisk. Is the ## special code employed as when it is >> entered >> through the handset or is the blind transfer through the phone >> function accomplished in a

Guys, this is a weird question but has anybody disabled the blind button that appears on polycoms or know if you can disable the use of blind transfers on polycoms to make any transfer attended? Thx!

Hello! I'd like to Flash() a modem line (BRI) with Asterisk. It is a passive ISDN-card connected to a hardware PBX. I use ISDN4Linux. I recognised that unfortunately the Flash() application flashes Zap devices only. Now I am wondering how I could flash Modem/ttyI0. The source code chan_modem.c doesn't contain anything about flashing a modem line. So I tried to simply put the AT-command

Hi List, I hope this setup must be done by our astersik users.. I am using Sipura 3000 to receive PSTN calls and forward those calls to asterisk for voice processing and after that, I am transferring call to extension through FXS port on SPA 3000. Currently, media of call is trombone through asterisk. i.e achieving blind transfers on asterisk with SPA 3000. Is it possible to stop trombone