similar to: Transfer Question

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

Hi I'm a little lost on how to set things up with the two FXO cards I have: I want card #2 to dial a number when a call comes in on card #1. Using the following configuration, card #1 picks up the line and remains silent, instead of dialing out through card #2. Anybody knows what's wrong? --------- /etc/zaptel.conf --------- # Zaptel Configuration File # fxsks=1,2 loadzone=fr

Hi list, I enabled the transfer function in my dialplan, but I may configure it wrong because sometime when I call a SIP extension number from one FXS port, the SIP side will hear word "transfer", I hear nothing, after that, the call conversation is fine.I'v had this problem for a long time, could not get clue where I configure it wrong. here is my related config part: sip.conf:

List, Having a little trouble with the following. Let me prefix by saying I have blind transfers working from the following setup. Inbound call [from-zap] (SIP/sv0071iv) answers. Zaptel -> Asterisk -> SIP extension SIP extension then blind transfers [from-sip] --- SIP extension -> Asterisk -> Zaptel During this whole process, the original channel off the trunk (lineside T1) is

I am trying to setup an interactive menu where a caller hits the main menu and can then dial an extension. As far as I can tell the "Waitexten" app is failing to read 3 digits and just reading the first and then announcing that it is invalid since all extensions are 3 digits. How do I make Waitexten wait for 3 digits? I have setup the extension "100" for users to reach the

Hey hey... I'd like to create a new feature code in asterisk so when a user dials... say... *00, it would then call some other extensions and play a sound file to them. So far, this is what I have... [testing-custom] exten => *00,1,Wait(1) exten => *00,2,Playback(beep) exten => *00,3,Playback(beep) exten => *00,4,AGI(festival-script.pl|I will now attempt the call) exten =>

Hi All - I've got a load of Polycom phones, and for the most part, I think they're great, but one thing that is bugging the heck out of me (and my users) is the "on-hold" feature. When you're on a call, and another one comes in, it doesn't ring the second line appearance on the phone, even though I have it registered separately, and I've tried to make my

We have two small business that run out of our office. One business has 3 phone lines, and the other has only one. In a perfect world, Asterisk would indicate WHICH line (or group) the outsider caller called, so that we would know which way to answer the phone. The incoming calls would go through a voice mail menu first - different for each company. (Press one for sales, two for

Hi all, i;m obviously a newbie, its been 2 days that im trying to figure out a way to deny a specific extension (300) from calling another specific extensions (03) except if the caller punch a specified password.. sorry if im not explaining myself well.. heres an example: i called my pstn line(with 300 as its sip account), an attendant answers and asks me to punch in an extension number right

Thanks a lot Danny. I have done the part of playing a file by creating a context in my dialplan. Now I am puzzled as i wish to store the DTMF inputs done by the users who is listening to the playback. I found there are ways, but some specific way by which it is not stored in file but conveyed directly to the asterisk server. When the call landed up on the softphone, i pressed keys the

Hi all, I'm trying to setup a simple IVR menu in a context in extensions.conf. So far, I have: extension s for playing back the menu # to repeat it * for directory 0 for operator 1 which goes to another context: exten => 1,1,GoTo(option_1,s,1) Here is what I have in extensions.conf: [incoming] ; main greeintg exten => s, 1, Ringing exten => s, 2, Wait(10) exten => s, 3, NoOp()

I have a question about the blind transfer using ##. This works great on our cordless phone, but there have been occasions that we can't transfer using ##. I was able to reproduce the issue by doing the following: 1) Call in from the outside line, 2) Ask the operator to transfer me to an extension using ##. 3) Get the voice mail greeting of the individual. 4) Hit 0 for the operator

All, Thank you in advance for any help. I have a customer in need of a conferencing system. A requirement is for users to each have their own PIN for the same bridge. So, I put the list of users, PINs bridges into a MYSQL DB and used an ODBC connector to parse the table. Asterisk is connected and reads the rows as expected. The problem is that if a user enters a PIN that is NOT in the table,

Relax your PRI is fine. What Xo is sending you is 4 digits os DID. If for example you have 1130-1153 as the last 4 digits of your Number you can use this to rout your calls. exten => 1130,1,Goto(ivr,s,1) Exten => 1140,1,Goto(extensionss,100,1) Exten => _X.,1,Zapateller Is the above config. XXX-XXX-1130 with go to the s extensions' first priority in the ivr context. XXX-XXX-1140

Hello, I have an installation in Austria; ISDN service provided by Austria Telekom. The main number of the service is 6 digits. Incoming calls may contain 2 additional digits, which I then use to route the call to the correct extension. Telekom sends me all the digits. My problem is that when someone tries to dial an 8 digit number to an extension from an outside analog phone, AT sends the call

There are times when I need to call a client from my cell and I want a recording of the call. I was trying to put into an * a way of doing that. Below is what I'm using in my extensions.conf exten=> X,1,Read(num,"/var/lib/asterisk/sounds/mtas/10digit",10,,,5) exten=> X,2,SayDigits(${num}) exten=> X,3,Background(/var/lib/asterisk/sounds/mtas/verify) exten=>

All, I have been beating my head against a wall trying to figure out how I would implement a separate moderator code and participant code for the same conference using meetme, the deal is I dont want the participants to be able to join until the moderator is in the conference. Is it possible to do this using the apps as they are , or is their a way to use an Agi script, is that the only way?

Hi list, I am running TDM11b + Asterisk-1.4.9 + Zaptel-1.4.4 + Libpri-1.4.1 on CentOS 5. I am having trouble to make my simple IVR extension work, here is relevant config: zapata.conf ---- context=incoming signalling=fxs_ks channel => 4 context=internal signalling=fxo_ks channel => 1 ----- extensions.conf: ---- [office] exten => s,1,Dial(Zap/1,30) [home] exten =>

Hi all, I am trying to understand how I can get a simple IVR scenario to work properly (having already removed most of my hair...). The basic requirement is as follows: * Caller arrives at our main number * Caller is greeted and then told they can enter an extension number, if known, or wait and their call will be connected to an available rep. * The IVR then dials a group of extensions (if

I'm a bit confused about how WaitExten works. I assumed that when it returns 0, the next priority in the extension would be executed, but that doesn't seem to be the case. When I get to WaitExten and enter extension 8, it plays the message, then Waits another 10 seconds and times out. [local] exten => s,1,Wait,1 ; Wait a second, just for fun exten =>