similar to: SIT tone detection on Zap channel (PRI)

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

Watch the output of 'pri debug span 1' on the Asterisk server while placing the call - bug #4468 (http://bugs.digium.com/view.php?id=4468) might be relevant. > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Andy Goss > Sent: Monday, October 10, 2005 5:58 AM > To: Asterisk Users

Thanks for the reply. Forgive me for being na?ve, however have jumped in to this asterisk project at work due to some circumstances beyond my control and I don't know a lot about carriers and how this all works. I am figuring it out, but it's a lot of trial by fire. As far as I know, we only use 1 carrier for our system. We have a PRI from NuVox and we use 7 channels for our asterisk

As far as I can tell, after discussing this matter with other asterisk users in my area, my telco _does_ provide disconnect supervision.. It seems that the problem is actually related to the Sangoma A200 card I'm using, as two other people both using this same card have expressed the same problem.. Are there any other users on this list using the Sangoma A200 FXO port card, and experiencing

I was playing around with conferencing tonight. I was able to place a bunch of SIP phones and a couple of my Zap FXS phones into a conference. So I thought, "Let's see what it's like when people come in from outside." So I called a friend and had him call in on one of my Zap channels, WHICH IS CONNECTED TO MY POTS LINE THAT DOESN'T DO DISCONNECT SUPERVISION. When he

> Watch the output of 'pri debug span 1' on the Asterisk server while > placing the call - bug #4468 (http://bugs.digium.com/view.php?id=4468) > might be relevant. Yes, this is exactly what is happening. Thanks a lot. I am thinking about adding a special case for the IBM 800 number since it is the only one my company is complaining about. Currently I have this in my dialplan:

Hello, I have seen the Mitel 5055 SIP phone mentioned a few times on the list, does anyone have any wonderful or horrible things to say about it? We are thinking about using them because they have many more programmable buttons than the Snom200 phones and are about $70 cheaper. Thanks, MATT---

I managed to get Asterisk working with my PBX using T1, now I am moving on to trying to make PRI work. I have my zaptel.conf and zapata.conf configured as follows: Zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone=us defaultzone=us Zapata.conf: [channels] transfer=yes immediate=yes callprogress=yes language=en context=default switchtype=national signalling=pri_net group=1

Does anyone know if it is possible to use the following disconnect tone setting with an x100p card? Disconnect Tone: 350@-19,440@-19;4(.25/.25/1+2) This tone was written for a Sipura SPA-3000 for a Panasonic KX-TD1232. The Panasonic does not support disconnect supervision, so this tone is the only thing that will detect a disconnect. It is not a standard fast busy or offhook tone.

Hi. I just started trying to play with Sphinx. I followed their site as far as running sphinx-server. It is listening on the default port. I copied sphinx2-simple to another file and changed sphinx2-continuous to sphinx2-server. So, I ran eagi-sphinx-test under asterisk. What exactly is it supposted to do? Here's what I get: debian:~# sphinx2-simple2 sphinx2-simple: Demo CMU Sphinx2

> Hi Gareth Blades & Doug, > > Thanks so much for for the feedback. I have searched on lot of documents > but couldn't able to find clear answer regarding it. > > I hope you guys replies are very much help all in aterisk community. > > > Thanks & Regards, > > Vidura Senadeera, > > Network Engineer, > > Debug Solutions > > Sri Lanka .

Hi , Thanks danny nicholas. Finally we get the things done with following. If i specify busypatten=500,500 then asterisk does not recognize hang up signal. After removing it only all are working fine. I choosed 2nd option as per your suggestions. working chan-dahdi.conf: ==================== signalling = fxs_ks busycount = 3 busydetect = yes callprogress = yes progzone=in usecallerid=yes

Hi all, can somebody explain me why i can't hear a ringing tone (alerting) if i'am going to connect to my destination end point? Is it basically so that i have to configure like: exten => xxx,1,Dial,ChanTec/number|timout|r Is it really nessesary to use the "r" option everytime if i want to indicate a ringing tone? This suggest a wrong call flow for the user ... Thanks for

so i have been running v1-0 on all of my test boxes for about a month now testing iax/sip/res_xxx. I decided to put it into production so I updated a box that was running 0.9.? that had been working perfectly for months and low and behold the inbound line from telco now intermittantly doesn't clear and none of the other channels can dial out on that line. I have tested the line in this

Here is a log from a recent call made out on a ZAP channel from a SIP phone inside my network. For some reason, CDR is billing time even though the "busy tone" was detected. It's also logging the call as ANSWERED. Is this normal behavior? Seems a little odd to me. I have this as the first 3 lines of my zapata.conf [channels] busydetect=1 busycount=3 CVS HEAD updated late

Hi, I've noticed that sometimes instead of getting a regular ring tone when calling out on a Zap channel, I get this obnoxious loud noise which forces me to hang up. Is this a problem in the Zaptel driver? I seem to recall that ringback tones are generated by zaptel when dialing out from a SIP phone over a Zap trunk. Thanks.

I'm a bit confused about how to handle this. I have Asterisk sitting in the middle between a Qwest Long Distance T1 (Voice T1, D4, SF, AMI) and an external voice mail PC using a Dialogic D/240SC-T1 card. The Qwest T1 originally was connected to the Dialogic card directly. The signaling was set to E&M Wink Start because Dialogic used this as its default settings, so it just worked

Don't know what else to call this. Googling and some time on the IRC channel haven't gotten me anywhere. Here's the sitch, which is a bit complicated but is something my customers are in fact encountering on an everyday basis: 1. Bob is on a Zap channel talking through the PSTN to Carol. Both have the misfortune, like so many of us, of having LECs who do not offer disconnect

I have an older Newbridge Mainstreet 3624 upon which I'm terminating some analog DID lines. They are effectively loop-start trunks with battery supplied by me (ie. FXO) and consumed by the serving central office. One major part of DID is the requirement for providing Answer Supervision in the form of battery polarity reversal on the analog trunks. Without it wierd things start happening, like

Whenever we call IBM, the call counter on the phone never starts and in the CLI the zap channel never gets the answered signal from the PRI. See below. -- Executing Dial("SIP/5933-645d", "Zap/g1/18004267378") in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g1/18004267378 At this point, I am in IBM's menu system. However the call never