similar to: Creating a Voicemail ...

I'm trying get this working. I've looked through the list, and can't see how to get AMD to print out more. I have it call and say Hello like I normally would. I've tried to say more and less doesn't seem to matter. After I hangup it does recognize hangup. Here's logging during an attempt where I make outbound call and answer, but then hangup after 1-2 seconds: Jan 24

I've set up an outbound .call system for customer callbacks and the like. Calls are going out over analog lines and I'm trying to use the WaitForSilence routine to make sure the phone has stopped ringing before starting message playback. The problem is that if I set the first argument of WaitForSilence to anything other than 1, WaitForSilence never exits. Some general info on my setup:

Though asterisk support AMD which is based on silence detection but I did not found support of tone / beep detection in asterisk to record a voice message for answering machines after detecting tone Will appreciate any help in this regard Best Regards *Tahir Almas* Managing Partner ICT Innovations http://www.ictinnovations.com Leveraging open source in ICT Unified Communication Telemarketing

Hey all I have been beating on this all weekend long. Any feed back would be appreciated. We stood up a 11.6 system. We tested everything we could think of. We moved over to it and all seemed to be working good than a customer told us that they were not hearing our vociemail greetings. When we call into the system and it drops to voicemail we just get a beep no greeting played. We checked

Bear with me this is a bit long winded. I am having some issues making automated outbound calls over Broadvoice from my Asterisk 1.4.2 server. For reference, none of the below issues happen when I make the calls to VoIP phones attached to the Asterisk server. What I am trying to do is call, using a .call file, out via the SIP trunk we have setup, and when the party picks up use AMD to

Hey all I am having instances where voicemail boxes will have a 00001 message and no 00000 message this causes the user to be told that they have a message that they can't get at. If I renumber the messages manually to start with the 00000 numbering then the user can get their messages. What could be causing this and how can I get it out of the system. Is there a patch I can apply to the

I'm having a problem with dovecot and apple mail not always remembering the seen flag. Some cases when mail is read it stays that way but other times it reverts back to unread on the next connection. I've tried to rebuild the Apple Mail mailbox but that doesn't do it. The mail is stored in Maildir format in the users home directory. All the connections Apple Mail are done

I am having a bit of a problem getting AMD to work on a new server. On my regular office server it works like a charm. I am running Asterisk 1.4.13, Zaptel 1.4.5.1 on both machines. Both servers run CentOS 5 and I am using a SIP trunk to send out calls (the same one on both servers). Here is the output of a call on my office server: -- Attempting call on Local/0445540881644 at CC2 for

Anyone used the new Grandstream GXP-21XX series phones. We have been testing these phones and like what we see. We are looking for a greater cross section of testing before we roll them to production. Any feed back would be appreciated. We are talking with Grandstream engineering and they are looking for feed back as well. Any input is appreciated. Thanks Bryant -------------- next part

Hi all, i'm trying to make AMD, Answer Machine Detection, to work on my outbound context but i can't get it to work, just on inbound context like whe i use the application Answer before AMD, but i need to make AMD to do the detection on an outbound predictive dialer integration. Follow are the inbound and outbound examples. My current environment is Asterisk 1.4beta3 and a Digum

Hi, Having some issues here with getting asterisk realtime for the dialplan (extensions.conf) setup: mysql> desc extensions_table; +----------+--------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +----------+--------------+------+-----+---------+----------------+ | id | int(11) | NO | MUL | NULL |

I am originating a call to a Local channel using an Originate Action: Action: Originate Channel: Local/dial at outdial Context: outdial Exten: answer Priority: 1 Timeout: 45000 ActionID: some_id In my dialplan, I have this: [outdial] exten => dial,1,Dial(${DIAL_STRING}, ${DIAL_TIMEOUT}) exten => dial,n,NoOp(Dial Status = ${DIALSTATUS}) exten =>

I'm deploying a fairly large number of Cisco 7905 with SIP connected to an asterisk PBX. The problem: the 7905 has this nice "feature": You can set a "voice mail number" in configuration, so that you can listen your voice mail just by hitting the "messages" key on the phone. It just autodials "8500" or whatever else. The customer wants this, so

Hi all Looking for a solution to create a flexible voicemail solution in Asterisk without the need to preregister the voicemail users (via databases etc etc). Scenario: All incoming calls are voicemail calls however the dialled number (called party) does not necessarily have a voicemailbox configured in the Asterisk system. I am looking for * to do the following: * Call comes in *

so... I've been tinkering with KVM again. my desktop is windows, the linux server is remote, so I have a ssh X tunnel running, and XMing running locally, and launch virt-manager. opens fine, shows the VM I created some time ago. I select that VM (which is running centos 6), and 'open', a window opens for a few seconds, then blam, virt-manager exits before I can click on

I'm trying to change the ring tone on my 7960 from the dialplan. I've tried the example on the wiki but it doesn't seem to work. Something like: exten => 3010,1,SetVar(ALERT_INFO=<Bellcore-dr1>) ; selects Ringer exten => 3010,2,Dial(SIP/3010,15) I'm not sure what the Bellcore-dr1 ringer is supposed to be. I've tried replacing ALERT_INFO with another ring tone

1.6.2.0-rc1. I am having trouble with voice mail intermittently not working correctly on CHANUNAVAIL. (it may happen for other statuses too, haven't checked). Basically here's what happens: -- Executing [1651xxxxxx at mydids:1] Macro("SIP/ipkall-trunk-14838bc8", "phone,1651xxxxxx") in new stack -- Executing [s at macro-phone:1]

Hi, I have a load of IAX extensions, which I'm trying to set up a standard macro to dial them, which gives unavailable or busy voicemail if there is no answer or the phone is in use respectively. The macro I have at the moment is: ; std-exten macro, ${ARG1} = Device to call, ${ARG2} = voicemail box [macro-std-exten] ; Call the user for 20 seconds exten => s,1,Dial(${ARG1},20,tr) exten

This 2 line code is doing what I wanted. exten => 200,1,voicemail(200) exten => 200,2,Hangup What I've been told is that they want the 20 year old phone system to light up the message bulb. (yea, a filament bulb, not an LED) To do this you pick up on the line that goes into Asterisk and do a: exten => 200,1,SendDTMF(200w#86) But I don't know the path to take to get that

If I create a desktop item which is a link to a URL with a port number, opening the desktop item fails. I can create the desktop item by dragging and dropping the URL from my web browser, firefox. The desktop item, when I attempt to open it, brings up a message box with the title "Cancel Open?", a lightbulb icon, a message "Opening 'myURL:myPort'. You can stop this