similar to: Linking Asterisk with another SIP PBX (or SIP Softswitch)

Hi List; Where I determine the codec to be used for the SIP Trunk (between Asterik and another SIP softswitch)? Regards Bilal ____________________________________________________________________________________ Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out. http://answers.yahoo.com/dir/?link=list&sid=396545433

Dear List; I am trying to create a link between Asterisk and My softswitch, the link to be SIP Trunk. I did the below configuration and I do not know if any one can help me and advise me to have better configuration to be sure that link is fine. But I do not know how to determine the SIP username to be sent for my softswitch as sometimes the softswitch need to check it. Also, does asterisk

Dear Alex; Thanks alot for your nice help. This is if I need to let Asterisk register with another softswitch (so I used register =>), what if I need asterisk to send call for the softswitch without register to it (directly)? If I removed the register => then how it will distiguish the IP address in the "host" at the [sip_trunk] is the IP address of the softswitch that need to

Hi List; Any one can advise me to a good link to see and buy Polycom IP Phones? Also, if I need support (in case the Phone was damaged and need to replace, so the warantee), so which web can provide that? I do not need to buy from one and he is not responsible for support. Regards Bilal ____________________________________________________________________________________ Be a better

Hi List; How to upgrade the Asterisk, Zaptel and LibPri and keep the configuration the same? I do not need to remove current asterisk, zaptel and libpri and download new one and write new configuration. Regards, -------------- ITS IP Telephony and Contact Center Engineer Eng. Bilal Ghayad Mobile: 00965 9849460

Hi List; I need to use an prepaid billing system with Asterisk, and I do not know which one is more stable and integrated with Asterisk? A2Billing or AstBill or ASTCC? Also, from where I can download it and ready about its configuration? Regards ITS IP Telephony and Contact Center Engineer Eng. Bilal Ghayad Mobile: 009659849460

Dear List; How can I place a call via Zap/g1 (group) but need to determine the line (FXO port) that will go via it? Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line. Regards Bilal

Hi All; Alot of softswitches or PBX's does not accept to manipulate any SIP call without being registered firstly. So that means, I need asterisk to register firstly then I can route my calls to that SIP trunk. In IAX2, we use the register => , so what shall we do in Asterisk? And how its format will be (if we will use register)? Or what is the solution? Regards Bilal

Dear all what is softswitch what is difference between asterisk and softswitch ?? regards satish patel --------------------------------- Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get listings, and more! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello averybody, I'm looking the softswitch in digium website, anyone test the softswitch? Best Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071202/2440f782/attachment.htm

I've been working in the VoIP industry for just a bit over a year now... Mostly taking care of the underlying systems. I've now reached the point where I'm being drawn more and more into the call processing side of things. My background is in computer and "classic" telephony systems (DMS250/MTX, DSC 400, T1, channel banks. telabs analog echo supressor modules and

Pardon my ignorance, but I was hoping someone could clear up something for me. - For a few POTS lines, digium has a single port card for that, or a T1 card to a channel bank. - For 10 or more lines, digium has a T1 or E1 card for that too based on PRI channels - For 100's to 1000's of lines, I suspect a soft-switch is in order??? A traditional phone company will sell: - POTS lines for

I'm confused a bit about the following and was hoping to get some answers on this group - What is exactly implied when we say asterisk can connect to a PSTN. Does it mean connecting to the PSTN via PRI/T1/E1? If yes, then I assume asterisk does not need to do any SS7 signaling and all it does (playing the role of a PBX) is to connect to a Class 5 Switch at the CO. Is this a correct statement?

Hello everybody, Im new to the list and also new to asterisk, Im wondering if I could set up asterisk as a softswitch, I guess for what I've been reading that It could be possible but almost all the info and documentation Ive found so far is about asterisk as a PBX, etc. Im willing to set a small voip wholesale traffic bussiness and Im not quite sure asterisk is the right chocie for that.

As an example....if we have a call that: 1. originates via PSTN line to one of our local DID's in Seattle 2. comes into our Asterisk server in Los Angeles or Denver 3. is routed by Asterisk for termination back to a different Seattle PSTN ....and if our VOIP call termination provider requires (in order to get their best rate) all calls to go through their Nextone

Hi, has anyone connected Asterisk to Cirpack softswitch sucessfully ? Any howto or more info about needed Asterisk SW and setup ? Thanks in advance, regards, Rob.

Hello all, Here is my problem, I try to place a call to FWD (free world dialup) trough my asterisk PBX. my config is as follow: extensions.conf ---------------- [internal] exten => 613,1,Dial(IAX2/iaxfwd-outbound/613) (service echo de FWD) exten => xxxxxx,1,Dial(IAX2/iaxfwd-outbound/xxxxxx) mon numero FWD exten => yyyyyy,1,Dial(IAX2/iaxfwd-outbound/yyyyyy) celui d'un ami FWD

Hi List; How can one Asterisk Box A to send a SIP call for another Asterisk Box B, and that call to be authorized based on the username and password, and not on the IP (as the IP address of the source is not known because it keep changing)? I think the trick in the Dial command, how to write it properly in a way that other Asterisk Box can recognize the sip username and password which are existed

My asterisk should follow 302 redirect which it receives from other sip server(10.10.10.10). By running network sniffer I see, that asterisk receives 302 answer, but doesn't follow it. My config is: sip.conf: ....... [out4] type=peer host=10.10.10.10 canreinvite=no promiscredir=yes insecure=very disallow=all allow=g729 allow=g723 ....... extensions.conf: [to-sip] exten => _0011X., 1,

When somebody call me on my pstn # cable connected to my fxo card it does not work when I check my computer the following error shows Connected to Asterisk CVS-v1-0-12/05/04-19:46:25 currently running on asterisk1 (pid = 2160) Verbosity is atleast 3 -- Remote UNIX connection -- Starting simple switch on 'Zap/1-1' == Starting Zap/1-1 at incoming,s,1 failed so falling