similar to: Calls audio stops with latest Gigaset C450IP firmware + voicemail

Hi, I'm using Asterisk 1.2.18 on a Debian Etch box. I have two phones a Gigaset C450IP and a Snom 360. Suppose someone is calling the Gigaset phone and a second call comes and is redirected to the voicemail: if the new caller hangs up during voicemail announcement, Asterisk drops the first call. This does not happen if the first called party answers the incoming call using the SNOM phone.

Hello, My goal is to provision C450IP or S450IP models. Has anyone a hint to provision them from configuration files ? Usually, we use dedicated menu embedded inside Gigaset handset. An http server also exists but I couldn't find any dhcp-tftp combination to configure them. Any clue ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

... Activating "sip debug" shows the register packets but nothing in return. ... I think that this is a network related issue, but you have to solve it by using a Asterisk config file. Unfortunately I think that the faster way to solve your problem is trying to understand if sip messages are correctly sent to tnet. I strongly suggest to use http://www.wireshark.org/ previoulsly named

tnet.itand SIP register messages are not replied. I suggested to check if your Asterisk box is really sending SIP messages, you can use a net sniffer. Did you alerady used different sip client with the same sip account of your Asterisk box? Did you use zoiper from the same box? Marino p.s. Are you Italian? On Mon, Jul 14, 2008 at 5:27 PM, Giorgio Incantalupo < gincantalupo at

Hi. Again one big mysterious problem I hope some good guy can help me solve. I'm trying to connect some Siemens C450 SIP IP Dect phones to asterisk (1.2.13) (I have actually 3 handsets + 3 ip base). After configuring them and rebooting, all of them register properly on asterisk, then, after the first call, they appear no more registered as registered in asterisk, and on the handset the

Hi, I am trying to use zaptel module on an Ubuntu 5.10 distro (2.6.x kernel) using gcc 4.0.2. Compilation does not give me errors so after a 'make install' I try to load zaptel module with insmod but the following error arise: *insmod: error inserting '/lib/modules/2.6.12/misc/zaptel.ko': -1 Invalid module format* Is there anybody who can help me?? TIA Giorgio --

Hi, I'm monitoring an Asterisk 1.2.18 box because sometimes I get two Snom 360 phones creating a lot of SIP channels between them and it seems they never die. How can it be? Thank you. Giorgio A "show channels" excerpt follows: SIP/20-08a7aa80 (None) Up Bridged Call(SIP/31-08a64220) SIP/31-08a64220 263 at inbound:1 Up

Hi, does anybody know what *zttranscode *module* *is for*?* Thanks!! Giorgio -- _________________________________________________ Giorgio Incantalupo, mailto:gincantalupo@fgasoftware.com FG&A srl - http://www.fgasoftware.com - Voice@Work - The Agile PBX http://www.voiceatwork.eu Tel: 02997663.14, Fax: 0291390172

Hi, I'd like to build a personal PBX connecting 4 or 5 analogic phones with a ADSL line and I'd like to know what is the right card I need I visited digium site and I think TDM400 could be the right choice but I cannot understand how it works...I think it has 4 slots where 4 modules (FXS or FXO) can be inserted. How many cards do I need to connect my ADSL line to 5 phones? I think I

Hi all, since Asterisk 1.4 seems to have too many differences from previous versions, wouldn't be nice to have a new mailing list? Giorgio Incantalupo

Hi, It seems to me that DECT Gigasets do not support MWI when connected to a Polycom/Kirk DECT base station : when a new message is dropped into user's mailbox, I can see a NOTIFY message sent by Asterisk to Polycom/Kirk DECT base station (here a KWS300) but Gigaset's handset MWI remains unlit. At the same time, a Polycom/Kirk handset subscribed to the same base station would turn its MWI

Hi, I'm making some tests with Tellfree brazilian provider. I'm using 2 users A and B, one for calling and the other to receive calls. When I make a call I can see (from the CLI console) user A is calling user B but user B does not answer (the phone continues to ring) even if the "sip show registry" command says user B is registered. In my sip.conf I have: register =>

This is a function of the Phone itself. Asterisk has nothing to do with it as it does not know anything about the call until after the SIP device 'sends' it. To my knowledge it is not posible. I don't even think a SIP standard is available for this. This 'feature' along with changing CallerID Display after a call has been answered is something missing from the RFC. >

Hi, we have an asterisk 1.2.1 box and 2 polycom SIP phones. We'd like to show the called name on the calling polycom display instead of his /her extensions as I do with the caller name on the called polycom. Is it possible? If yes, how? TIA Giorgio Incantalupo

Hi list, Before purchasing a number of Siemens DECT SIP phones, the Gigaset S675 IP, I read that the problems with MWI had been fixed with the latest firmware version (see http://www.voip-info.org/wiki/view/Siemens+Gigaset+S675IP). Now I'm not so sure that's the case. After setting up a network mailbox for one of these phones, as well as an Asterisk voicemail account (ext.

Hi, is there anybody who knows what this warning means?? WARNING[27309]: chan_sip.c:8875 reload_config: Section '10' lacks type TIA Giorgio -- ____________________________________________________________________ GIORGIO INCANTALUPO Tel. +39 02 9350 4780 (104) FG&A Software 20017 Rho - Via Puccini, 8 E-Mail : gincantalupo@fgasoftware.com Internet: http://www.fgasoftware.com

When you configure the Siemens gigaset handsets (I have S685IP), there is a single option for all handsets to use either the POTS interface or VOIP as the default outbound destination - you then need to add a dial suffix if you want to use an alternate outbound route. Does anyone have any suggestions as to how to make just *one* of the DECT handsets only use the POTS but others default to

I'm having no end of trouble with some Siemens Gigaset phones and GS HT286s. Gigaset 100 and 3010 phones work perfectly, but a 4010 only rings once then it goes off and then just flashes it's LEDs and displays "incoming call" on the LCD with no further ringing. According to the manual it is CTR37 but the only setting on the GSs is CTR21, I've tried different cables but some

2008/10/5 robert.boardman at gmail.com <robert.boardman at gmail.com> > Kevin P. Fleming wrote: > > Olivier wrote: > > > > > >> 2. R Hook-flash key is now available to transfer calls. > >> In s450IP web management server, its defaults settings are : > >> Application-type: dtmf-relay > >> Application-signal: 16 > >> >

Hi, I live in Italy and I have an Asterisk 1.0.7 box with a HFC monoBRI card connected to my cisco router which is connected to FastWeb provider: does anybody knows why every time my cisco router turns off, my telephone connection to Fastweb drops (while internet connectior is ok)? Restarting Asterisk is worth nothing. TIA Giorgio --