similar to: Customized Ring Tone

I cant seem to get outgoing calls to be placed properly .. No matter what I try I get an error from the PSTN company saying that the "call can not be completed as dialed" or "you need to dial a one..." The asterisk debugging seems to show the correct number being dialed out of the zap interface... the "9" is being stripped and there is a "1" where it is

Thanks to help on this list and Sangoma's support we have incoming and outgoing calls passing through asterisk. However both incoming and outgoing calls are greeted by silence. I've noted our existing config below with our test extensions.conf. Help much appreciated Rory Zaptel ----------------------------------------------------------------------- loadzone=uk defaultzone=uk #Sangoma

please help!!! I am dialing into our asterisk server(TDM400p) from the psnt. I hear our voicemail message and I press the extention 1000. The Polycom ip phone in the office rings. I pickup but neither side can hear one another. What have I done wrong? thanks sip.conf: [general] context=local-access ; Default context for incoming calls bindport=5060

Hallo Group! My Name is Guenther Sohler and I registred to this group, because I think asterisk could be interesting for me. I have got a small server at home running linux. It does NAT and a Firewall. There is an intranet with my home PC and a hardware SIP phone. This SIP phone registers at mujtelefon.cz Now I got another account at sipgate.at My idea is following: I want to be reachable at

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

Now that I actually try and google for it, I can't find any dual mode GSM/DECT handsets, only pages telling me that they exist without any actual information!!! Does anyone know of any such handsets? (and even better, ones that are available in Australia) I've searched a few of the major gsm manufacturers (nokia, Panasonic, sonyericsson) but their web sites are absolutely pathetic to the

I am using Polycom 501s with asterisk 1.2.4. When transfering to call parking wih "#1" -> 700 the user is able to hear asterisk tell him what extension the call was parked on. However, when I press "transfer" -> blind -> 700 . The user is not able to hear what extension the call was parked on. It seems like the polycom is hanging up before asterisk is able to

Ok sorry for not being specific. I am having a problem when people outside call in to my number which terminates at VoicePluse then The send IAX to me and I do not get any tones. People press buttons but it just goes to the next dialplan fall through. It happens 60-70% of the time. extentions.conf [general] static=yes writeprotect=no autofallthrough=yes clearglobalvars=no priorityjumping=no

I had MCGP working to a ADIT 600 fine with debain sarge stable / asterisk stable - wanted to try red hat and got the below message - then I re-installed debian and am still getting the same message below - any comments are greatly appreciated - I did play with the config files with no prevail - the Adit seems to be doing its job per tech support at CAC. I listed my conigs below I go off hook

Hello I'm having a difficult time finding precisely what to put in sip.conf and extensions.conf (and possibly other files) to get a working configuration to connect an Asterisk (1.4) server to a VoIP provider with the Asterisk server + SIP clients located in a private LAN behind a NAT router: http://img560.imageshack.us/img560/3749/asterisknat.png Would someone have a full, direct (ie.

Hi there, I'm tring a basic asterisk settings. I have a asterisk 1.2.7.1 running on a I have a net with two computers and a router. The router IP in the local net is 192.168.1.1, The first pc has IP: 192.168.1.3 name datile3 . SO GNU Linux. the second pc has IP: 192.168.1.4 name fissun . SO GNU Linux. On datile3, it runs a softphone kphone. From this I want to call the external world. on

Hello, I get some problem installing asterisk + ekiga on my debian etch: ii asterisk 1.2.13~dfsg-2 Open Source Private Branch Exchange (PBX) ii ekiga 2.0.3-4 H.323 and SIP compatible VOIP client $: asterisk -U asterisk -vgc give me some WARNING like : ,---- | WARNING[21806]: res_musiconhold.c:852 moh_register: Unable to open | pseudo channel for timing... Sound

Hi in order to keep the dial tone after pressing 9 for 'outside line' I have this in my extensions.conf [localpstn] ignorepat => 9 exten => _9[123456789]XXXXXXX,1,Dial,${PSTN}/${EXTEN:1} exten => _9[123456789]XXXXXXX,2,Congestion this is properly included in the handsets' context but the dial tone disappears after pressing 9. am I missing something? thanks in advance

If I have multiple Sipura 3000 device how can I dial out properly? I can receive call without any problem and that's working really well. Caller ID is shown and when someone call he get's the welcome message the same way I have it configure with the X100P card. I don't seem to have any echo problem with the Sipura 3000 (but I do with X100P cards) My main concern is for

Hello everyone, I have Asterisk SVN-trunk-r7498 installed on a server (celeron 2.4 Ghz, 256MB) with a TDM40b a TDM04b and an avm fritz!card pci. I experience a problem with voicemail: my messages are good unless the incoming call comes from isdn, which means via the avm fritz!card. In this case (and in this case only) the message is disjointed and I can hear at most 1 second out of a 1 minute

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

hello, I have instaled a analog line, and when I call on the console apears that: I want to redirect the call to 101 extension. *CLI> -- Starting simple switch on 'Zap/1-1' == Starting Zap/1-1 at default,s,1 failed so falling back to exten 's' == Starting Zap/1-1 at default,s,1 still failed so falling back to context 'default' Apr 27 08:15:53 WARNING[3494]:

Hi, I have two asterisks connected via IAX2 trunk. The first * use dial prefix 2XX, the second one 3XX. Calls routing works OK. But I don't know how to get dialtone of remote asterisk pbx. I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of asterisk #1 after dialing 2. I know something about DISA but I'm not sure if it is a right way. Can you give me advice?

HI, I'm using netmeeting to connect to an asterisk server and dial out. my extension looks like this exten => s,1,Dial,Zap/1/ Unfortunatelly the number that I have dialed in Netmeeting is lost ;-( If I hardcode the number on the line above, like ... exten => s,1,Dial,Zap/1/6642794 ... everything works fine What am I missing?

Hi Now, my Cisco AS5300 sent call to my asterisk, but two problems: When i call the phone number, i have: [Oct 28 06:01:16] NOTICE[12813]: chan_sip.c:18160 handle_request_invite: Call from '' to extension '0426000000' rejected because extension not found. [Oct 28 06:01:18] NOTICE[12813]: chan_sip.c:18160 handle_request_invite: Call from '' to extension