similar to: Using MSAccess to dial on a Zap line

Hello, I've found a little documentation on voip-info and on the asterisk- users list, although I was hoping for an example of a tried-and-true failover setup between PRI and SIP. We are an outgoing call center that uses asterisk 1.4 connected to 2 PRIs from the local telephone company in one group (g1) and a SIP trunk from bandwidth.com. The PRIs are the primary outgoing service,

Hello! I have been struggling with Asterisk 1.6 and DAHDI for the past few weeks. We are an outgoing call center with 30 internal analog phones hooked up to 2 Rhino CB24 channel banks. The banks are connected to a Rhino R4T1 card in a Dell 2950 server with 8 gigs of RAM. The 2 other ports on the R4T1 go to our 2 PRIs. In this configuration, we have trouble maintaining stability. It may be fine

Hello, The company I work for recently purchased 2 Rhino CB24s and a Rhino PCI-E R4T1. The channel banks are plugged into the R4T1, as well as 2 PRIs from our telco. The CB24s are for all internal analog phones. Most of the phones are setup in "batphone mode", which is "immediate=on" in the DAHDI config. They are set up this way because we are an outgoing call

Hello, I'm working with our SIP provider to nail down some call quality issues we're having, and they've asked me to provide SIP debug log files from our asterisk server. Is there a way to make asterisk 1.4 output only SIP debugging to a specific log file? Or it is best just to use tcpdump? Thank you! -- Jason Martin Metrix Matrix, Inc. 785 Elmgrove Road, Building 1, Rochester, NY

Hello! I am migrating an old Red Hat Samba 3.0.9 server to a new Debian Etch Samba 3.0.23d with an OpenLDAP backend. I've got almost everything working with the new server except the roaming profiles. When a user logs off, Windows complains that the permissions are not correct and the profile can't be saved. I would LOVE to get rid of roaming profiles but that isn't an option

Hello, I have a strange problem with one of my Zap channels. A user told me that he was in a voicemail system during a call, hit the Flash button, and the call hung up. Now we get no dialtone on the phone hooked up to the channel. Here's the status of the channel: jmartin at rogue:~$ sudo asterisk -r -x "zap show channel 7" Parsing /etc/asterisk/extconfig.conf Channel: 7 File

The bar is getting raised yet again http://www.voipmonitor.net/2007/06/05/New+Features+And+Services+For+Pack et8+Virtual+Office.aspx I personally use Snapanumber $30 or there abouts (after trialing a few other TAPI solutions and finding them sub-par) and think it's a great product but interesting to see how more people are expecting desktop/phone integration applications. Does anyone

Hello, We have finally upgraded to Asterisk 1.4, however we've run into two issues that weren't occurring before the upgrade. Issue #1: We're an outgoing call center and need to record all calls. We use the uniqueid field in the CDR to match with the recording, which we labeled with {UNIQUEID} in MixMonitor. For some reason, the uniqueid is not correct in the CDR. Here is the

Hello, I've been looking at some SIP packet dumps captured with tcpdump on the PBX itself, and analyzed with Wireshark 0.99.4. I'm noticing something strange, at least to me. All of the SIP packets going out from our Asterisk PBX to either of our 2 VoIP providers are consistently 50% out of order. In addition, if I use Wireshark's voip call player, the outgoing side of the call

Hello, We've purchased a 2nd Wildcard TDM2400P for our asterisk server. I've looked around but I can't find documentation on how to properly setup 2 or more telephony boards in asterisk. In particular, I want to ensure that the boards are assigned the same device channels on boot (for example, if you have two NICs in a Linux box and you want to make sure one card is always eth0

Hello, I'm using Asterisk 1.4.14, and I've noticed that the emails that are sent out when a user gets a voicemail don't have the timezone set in the header, so they're appearing in the user's email clients at the wrong time. Has anyone else seen this? I didn't find any bug reports or other info with Google. -- Jason Martin Metrix Matrix, Inc. 785 Elmgrove Road,

I am trying to use a the SIP tapi from www.enum.at <http://www.enum.at/> . This works fine from all kinds of applications which support TAPI, like outlook and Dialer Pro. However when making tapi controlled calls, the signaling to and from PSTN seems to fail. I have used the digium hardware ISDN PRI boards, but also a SIP gateway. Both result in a audio message from asterisk

Hello, I may have found a serious issue with 1.6.1.6. I just compiled it yesterday on our server. When anyone tries to access the name directory through the Directory app, the asterisk process completely dies. Our extensions are in a realtime MySQL table, and the directory has worked fine with previous versions of asterisk. Jason Martin Metrix Matrix, Inc. 785 Elmgrove Rd, Bldg 1

Hi im trying to use an application on MsAccess , first a try to open a single mdb and i get: wine Access\ 97\ Runtime/Msaccess.exe "c:\Informes.mdb" fixme:font:SetMapperFlags (0x224, 0x00000001): stub - harmless fixme:ole:CoRegisterMessageFilter stub fixme:ole:DllDebugObjectRPCHook stub fixme:ole:MSFT_ReadValue BSTR length = -1? fixme:ole:ITypeInfo_fnAddressOfMember (0x7e93ecc8) stub!

This is really strange. The samba server in question is a domain member server on a Windows NT 4.0 Domain network. It runs Gentoo 2004.3 with a 2.4.24 kernel. The Gentoo server was upgraded from Samba 3.0.5 to 3.0.8 last night. After the upgrade, the server had to be re-joined to the domain. After that, everything appeared to be working. This morning we found that the MSAccess database files

> -----Original Message----- > From: Lane Beneke [mailto:nolawyersallowed@yahoo.com] > A simple upgrade from 3.0.5 to 3.0.8 broke file > sharing on a MSAccess 2k database (Win2k and WinXP > clients.) There are Paradox databases on the same > file-share that are working fine. The log files show > no errors. I'm about to try increasing the debug > level, but can

I'm running Slackware 7.0 (glibc finally!) with Samba 2.0.5a, and having MSAccess97 (I know, doesn't scale, etc, but that's where we are) file and disk errors when multiple people try to access the database (from Win NT clients). Simpler single-user file serving is working fine (excel, text files, gifs), directory speeds are fine, copy speeds are fine. This database works fine when

I'm running Samba 2.0.5a on Slackware Linux 7.0. I have a large (>250meg) Access database sitting on a samba share. I ran this setup on an NT share with 3 computers hitting the database (all as my username), and had worked around all the Access locking problems inherent in Access Multi-user databases. Since moving to the Samba share, I am getting alot of errors, mostly disk/network

i successfully installed office '97 excel, word and powerpoint work all just fine. but if i try to launch access this is the output from command line: fixme:font:SetMapperFlags (0x234, 0x00000001): stub - harmless Wine failed with return code 250 at the same time an error message windows states: "A sistem errorr occurred, or there isn't enough free memory to start Microsft Access.

Hi, i have a problem with access xp (2002) database files after moving the files to the linux files server. really often (6 times today) the database file is corrupt. i am running samba 2.2.5 on linux mandrake 8.2 with kernel 2.4.18. i have read that this has something to do with the file locking, but don't know what to do right now. i've set the parameter "veto oplock files =