similar to: Integrated T1

Just FYI: IP address 89.248.168.176 has been trying to use the recently release SIP vulnerability in Asterisk to make outbound calls via our box. They are running a bank account callback scam. Jeremy Mann Director of IT Texas Health Management Group Direct Line: 817-310-4956 Main Line: 817-310-4999 Helpdesk: 817-310-4999 x3 Fax: 817-310-4990 Email: jmann at txhmg.com

I'm getting the following error over and over on the console: pbx_dundi.c:2975 dundi_rexmit: Max retries exceeded to host Any idea how to troubleshoot this? My network latency is roughly 40-50ms between all hosts in my dundi cloud. Jeremy Mann Director of IT Texas Health Management Group Direct Line: 817-310-4956 Main Line: 817-310-4999 Fax: 817-310-4990 Email: jmann at txhmg.com

Is the IP 650 sidecar compatible with asterisk? If I pair it with the IP 650 phone, can I have more than 6 "lines" registered w/ the server? Jeremy Mann Director of IT Texas Health Management Group Direct Line: 817-310-4956 Main Line: 817-310-4999 Fax: 817-310-4990 Email: jmann at txhmg.com ________________________________ This e-mail, facsimile, or letter and any files or

Is there any way that I can have an admin user hit * and then Mute all other users in a meetme conference? Sort of a moderator function? I know it can be done with MeetMeAdmin, but as I see it that requires a separate extension to dial, unless I've got the logic wrong? If it can be done in a single extension please show examples. Thanks. ________________________________ This e-mail,

Just curious, if I have my Polycom IP 550 phone VLAN tag 30, will the packets I send from my PC(on the PC port of the phone) have the same VLAN tag? THe PC is sending untagged packets. This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the use of the individual(s) and

Newest wanpipe (3.3.16) beta drivers do not compile against dahdi-linux 2.2.0-rc2 which is what you get when you get dahdi-linux-current.tar.gz Anyone have a workaround or patch? Error below ==================== Building modules, stage 2. MODPOST CC /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.mod.o LD [M] /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.ko make[1]:

Is there a way to tell asterisk, via a sip.conf peer, what IP address to send a packet out of? I've got multiple NICs in my box, each with it's own public IP. I need the SIP messages to originate from any one of the IPs depending on which number was originally called(and therefore where the packet originally came from). My fear is that it will listen on all IPs fine, but only respond

I've got a couple of extensions in users.conf that have both SIP and IAX access(IAX softphone, SIP hard phone). I'd like to setup my dial string to "check" to see which they are actively registered with, and send the call appropriately. Right now I have: Exten => _4xx,1,Dial(SIP/${EXTEN}&IAX2/${EXTEN}) But not all phones have both techs, so there is a lot of

Is there a way to recognize if someone called our PRI using an 800 number? The DID is showing my 4 digit primary line, not anything obvious signifying that an 800 number is called? ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the

I have a 2 port T1 card doing PRI passthrough, Span 1 answers from Telco, Span 2 sends to my existing phone system(Nortel). My Span1 gets sent to the context from-pri, detailed here: [from-pri] exten => _49XX,1,Set(CALLERID(all)=${CALLERID(all)}) exten => _49XX,2,Dial(Zap/g2/${EXTEN},,twk) exten => _49XX,3,Congestion() exten => _49XX,4,Set(CALLERID(all)="") exten =>

I have to connect a Meridian S1 to Asterisk for a slow migration to VoIP. What is the best way to connect them? 1. Is a T1 the best solution? 2. Can I pass Caller and Callee information across the link? If a T1 is best, I recall a standalone T1-SIP device a year ago on this list. Does anyone recall what the device was? How well it works? Thanks, MD -------------- next part --------------

Hi All; I do not know if anyone faced such case in dealing with open vpn (as we need it for fring to be used from the mobile: Which mobile can be used to install the open vpn client on it, so we can use it to do a vpn channel with the server that has open vpn server? Regards Bilal

I have a ton of Nortel MICS/CICS phone systems and am looking for an easy way to integrate them. Two questions arise: 1. Is it feasible to use asterisk as a Man in the Middle for a T1 PRI system? The idea is to intercept outbound calls from the Nortel PBX and redirect them via VoIP to another asterisk box at another branch transparently(thus saving the LD cost). Otherwise I'd pass

Hi, I've sucessfully completed an Openser 1.3.2 + Mediaproxy 1.9.1 + Asterisk 1.4 + CDRTool with freeradius telephony system. Asterisk is used only for voice mail and redirectioning calls. Every calls should pass through mediaproxy so that i can account them. The goal was to create a simple prototype of what could be a VoIP provider. Now i need to dimensioning this system to work

Hi all, I am trying to send an extra header in SIP INVITE Message , i.e (email="me at me.com") but when I check the Message at the target that header is not there So I is Askterisk altering the Message and Is there away to include extra headers for SIP INVITE Message? Thank u

I have a customer installation with an Adtran DS3 mux. The DS1's go into my Asterisk servers that run IVR/Call recorders. The DS3 provider is Qwest, and they tell me that they routinely drop the DS3 service to redundant back-up's and that this is a common practice that happens thousands of times to DS3 lines daily across the US without any service interruptions. They say that the

I've got the ztdummy kernel module loaded and seem to have all the desired prerequisites in place, but Asterisk never seems to compile with MeetMe() application support enabled, nor does there appear to be a module I am failing to load that would contain this application. Is there something really obvious I am missing? Thanks, -- Alex Balashov Evariste Systems Web :

Just an FYI for Digium. I received a mailing today from you guys which was nice. The price of mailing was ~$1.60 and inside was an inflatable beach ball. Cool, but I tried to blow up the beach ball and the the seam where the part opens to inflate the ball was not connected to the ball whatsoever, so it went right in the trash. I wonder if the sick heat had anything to do with it, was mine just

Anyone know if Rhino is planning on supporting zaptel 1.4 anytime soon? ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further

Does anyone have any tools to process CDR-CSV files into reports? I don't have anything specific in mind, I'd just like some reporting examples so I don't have to reinvent the wheel. ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended