similar to: asterisk and snmp

Hi List; If I set nat=yes, then asterisk will send the packets to the public IP address or to the private IP address (which will be for the endpoint that is behind the nating)? And by setting the nat=yes, then what exactly will be ignored at asterisk side when reading the registeration messages from the endpoint? Any help. Regards Bilal

Hi all I have the raw out put of a video camera in following format: mjpegb, yuvj422p, 1920x1080, 24.00 fps(r). I cannot directly convert this raw footage to Theora due to the YUV4MPEG2 only restriction of the encoder_example. Isn't it better to support other raw formats in encoder_example, such as what I have, mjpegb, yuvj422p? I presume even if I convert the mjpegb, yuvj422p to

Hi List; I need to configure a softphone to be client and use it with Asterisk, which is the recommended one? Is it iax2? Regards Bilal ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.

Hi, Any one have succeeded in firing up a sshd daemon when a machine is being kickstarted? I know VNC can be setup to minitor the kickstart process, but it is too limited and so I can not see the console and other screens with ALT+Fn keys. If sshd daemon can be setup at this stage, then we can remotely ssh into the being kickstarted client(s). and directly see what things happen during %pre,

Hi list; ASTCC supports IVR or there is a separate module for IVR? Can someone advise me a link to start download and ready about ASTCC to do the configuration? Regards, --------- ITS IP Telephony and Contact Center Engineer Bilal Ghayad Mobile: 00865 9849460 ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play

2007/5/14, Josh Coalson <xflac@yahoo.com>: > > --- Harry Sack <tranzedude@gmail.com> wrote: > > hi > > > > i was wondering if it's possible to tell me what the theoretical best > > compression ratio the flac encoder can do, because i was wondering > > what the future of flac will bring us. So this question is probably > > best addressed to

--- Brian Willoughby <brianw@sounds.wa.com> wrote: > are there any car stereo flac players? > > My CD transports are all broken or stolen, and I tend to ride with my > PowerBook attached digitally to my car stereo anyway. Seems like if > I buy anything to replace what I had, it should be a hard drive > player that supports flac, maybe with a removable drive. I

Hi! I'm using Slackware 11 and Wine 0.9.40. The problem is, Wine is not detecting my network settings, though it(Internet) works fine in my Slack. i can access the entire network (Company's), see the sambha shares in my slack, but when i try to run "ipconfig" or "ping", i got an error saying it was trying to user ICMP and this would not work unless used as root. Even

Maybe this has already been stated or is a feature request or I could be out of my mind. Is there anyway to access a remote mysql database from within let''s say...a puppet function? BC ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it''s updated for today''s

Hi, I'm a novice trying out an experiment with Asterisk and was unsure of the hardware needs for it. I'm wondering if its possible to receive a call from an external number (PSTN) say A. Then make a call to another external number (PSTN) say B - and then bridge the two calls so that A is talking to B? What hardware will I need to be able to do this. Secondly, if I had x number of

Harry, I wrote a little command line utility for this in C# - the lib it uses is a little overkill for the task but it does work. As Josh noted there is no compression gain, so I wouldn't bother unless you have FLAC's encoded with older versions. I also think Josh said there's a .BAT file out there that does the same thing. Here's the file:

I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal ---------------- No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone,

Hi: Please every that work with A102d say how about is it?Is it really difficult to install card for me new in asterisk? Best regards. --------------------------------- Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm currently implementing A rtp header info and using speex for audio. can someone tell me what the rtp payload type value is for speex. i've checked the submitted speex draft and it says its beyond its scope and i can't find anything in RFC3550 that might suggest what it is. any help would be appreciated thank you, Greg --------------------------------- Boardwalk for $500?

Guys, Just a quick check. From what i have read in the shorewall site, intrazone traffic is allowed completely by shorewall i.e. there is no filtering or packet size limiting ,etc,etc. I ask this becos after getting shorewall up and running well, someone has complained that they cannot print pdf files larger than 100k at one go but that they have to print one page at a time. Some details;

Hi In our office environment few servers mostly database servers and yesterday it happened for one application server(first time) the partion is getting "read only". I was checking the archives, found may be similar kind of issues in the 2007-July archives. But how it has been solved if someone describes me that will be really helpful. In our case, just at the problem started found

hi i was wondering if it's possible to tell me what the theoretical best compression ratio the flac encoder can do, because i was wondering what the future of flac will bring us. So this question is probably best addressed to Josh: can we suspect much better compression ratio in the future or is the encoder already at his *almost* peak compression level. thx in advance!

hi I have some questions about re-encoding existing FLAC files to FLAC 1.2.0.: - can older 1.1.x FLAC files be re-encoded to FLAC 1.2.0 by using the FLAC 1.2.0 encoder? - can FLAC files encoded with the FLAC Flake SVN encoder (or any other 'unofficial' FLAC encoder) be re-encoded by using the FLAC 1.2.0 encoder? thx in advance! -------------- next part -------------- An HTML attachment

Hi, I have a legitimate request for information about how I can contribute to the development of FLAC. I am not a developer, but would like to make a financial contribution. FLAC has immensely enhanced my enjoyment of music. Please let me know if this is an inappropriate forum for this request. Please respond. Thank you. Joe Palermo -------------- next part -------------- An HTML attachment

are there any car stereo flac players? My CD transports are all broken or stolen, and I tend to ride with my PowerBook attached digitally to my car stereo anyway. Seems like if I buy anything to replace what I had, it should be a hard drive player that supports flac, maybe with a removable drive. I remember hearing about Linux players many years ago ... anybody know whether I could