similar to: Asterisknow b5 - trouble registering at voip provider

I am trying to help a guy out with his Atcom IP04. He has set it up like this. He has a handful of IP phones all connecting via SIP. He has two phone lines connected to the FXO ports one from telecom, another from vodaphone. He has set up the dialplan so that one of the trunks fails over to the other trunk. Everything seems to be working OK except for outgoing calls. He can call from

Hi, I have the following dialplan. Problem is, if the user authenticates, * starts counting as billable seconds even if i hangup the phone before the called party answers..And also as disposition.. it accepts all calls authenticated as 'answered' If i commentout the authentication line everything works as it should be. How should i use authentication that, it should accept it as aswered by

Hi, I'm having problem with call parking. When I park call, either via transfer to xten or park digit sequence from features.conf, I hear the parking lot number read to me and the user gets transferred. However, MOH stops for the caller the moment user is transferred. The user can be retrieved by dialing the parked extension and voice resumes. If the parked user hangs up, the channel state

I need some extensions logic assistance, I'm trying to dial out one of multiple SIP trunks, in sequence. I need to detect a busy SIP trunk(I only allow 1 call per trunk) and roll over to a second or third depending on that busy status Here's what I've got for a macro thusfar, but it's not working(fails if the 1st trunk is busy) extensions.conf: [globals] trunk_1 => SIP/trunk1

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

I have a SIP phone calling via a SIP trunk another asterisk system, that then sends the call out a ZAP channel. When I press any of the features defined in features.conf, The end user on the ZAP side hears the DTMF tones, and none of the features work. My DTMFmode on the SIP users definition is rfc2833 Asterisk console doesn't register that a feature is being recognized, any ideas? Below

Hi everyone, having a issue with asterisk and my new Voip providers service. Iv set up many asterisk systems before but never seen this and have tried to fix this with no luck.. I have used this exact same sort of setup for 5 other providers and never had this issue, If i replace the trunk login details with my works voip account and set it to IAX then it works perfect, Just not the new

hi all I have a PRI line which i have connected to my asterisk server. I am able to make calls to mobile no through my asterisk server, while i am not able to make calls to land line nos. This is strange. Where do u think the? problem is , is it from the service provider or? mis configuration of my asterisk. I am from India and using airtel pri lines. Below i am pasting you my configuration file

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

Hi, I am attempting to setup an asterisk server, current specs: CentOS release 5 (Final) Asterisk 1.4.11 Asterisk-gui checked out from SVN last week I started with a fairly basic setup involving one VOIP provider who provided one dial in number, and a couple of handsets. Config files are below. It was pretty much totally built by Asterisk-gui, except for the fact I had to add

A call comes in from the PSTN, Asterisk answers it, it goes to the directory, and then to the extension the caller designates and the user at that extension answers. The user at the extension then wants to transfer the call to another extension; on the Cisco 7940 they push the ?more? soft key, then the ?Transfer? soft key, then enter the extension number they want to transfer to, and hit the

I'm trying to set on-demand call recording. Here's a snippet of the pertinent dialplan. The purpose of this is to allow one user in particular to be able to receive an email recording of the call everytime he dials *91 + number. The problem is that the email is not going out or being generated when I use the ${CALLFILENAME} variable. When I use the actual file name of the gsm recording,

Update on this: I found that by changing insecure = very to insecure = invite, adding the second trunk no longer stopped calls working. I've read the documentation on this switch and still don't see how it applies/is meant to get used. Anyway, with this change in place, the following may help: asterisk*CLI> sip show registry Host Username

Hello, I wanted to add a failover trunk to my asterisk configuration. I got 2 gateways for my calls.. one is a pri other is voip trunk. I want to keep my trunk for failover. I am using ast 1.6 with asterisk-gui. But when i add a failover trunk for test purposes asterisk-gui adds the following line to my extensions.conf. where superonline is my voip provider and span_1 is failover trunk. exten =

Hello, We have 2 SIP trunks from Bandwidth.com and if both are in use and someone tries to dial out, they cause another call to get one-way audio (the caller hears us, we cannot hear them). This happens 100% of the time and Bandwidth.com doesn't offer any support. I don't see any setting that tells Asterisk that there are 2 channels available from Bandwidth.com's IP. I'm

嬥堜桪巕偲怽偟傑偡丅 撍慠偺儊乕儖憲怣丄怽偟栿偛偞偄傑偣傫丅 僗億儞僒乕僒僀僩條傛傝擇恖偺彈惈偺徯夘埶棅傪庴偗傑偟偨偺偱丄 偛埬撪偝偣偰偔偩偝偄丅丅 堦愗椏嬥柍偟偺偛徯夘偲側傝傑偡丅 儊乕儖偺憲庴怣傪娷傔丄偳傟偩偗棙梡偟偰捀偄偰傕柍椏偱偡丅 姰慡柍椏偱偺偛徯夘偱偡偺偱憗婜掲傔愗傝偺応崌偑偛偞偄傑偡丅 傑偨丄掲傔愗傝偲側偭偨偲偒偼梊崘側偔彈惈偺曄峏傪偡傞応崌傕偛偞偄傑偡偑丄 偛梕幫偔偩偝偄丅 僋儕僢僋佀丂http://chestnut.happydeeds.com/a12/

I have released version 2.0.b5 of MultiMarkdown today. As always, it can be downloaded from: <http://files.fletcherpenney.net/MultiMarkdown.zip> Some of the changes include: * spaces at end of xslt filenames won't cause failure * use `\url{}` for "non-referenced" url's in LaTeX to allow linebreaks (though they still don't always break correctly --- this is a