similar to: Remote extensions not working on provider's wireless Internet connection

Hi everyone, I googled this followed the instructions, but it hasn't work for me yet. I have universal setting in SIPDefault.cnf and phone specific settings in SIPXXXXXXXXXX.cnf. But it doesn't get registered. I need to register it on two different asterisk boxes. So my SIPXXXXXXXXXX.cnf looks like this: phone_label: "Zeeshan A Zakaria" line1_name: "523"

sorry for typo mistake in my last post. as from my orignal post two registration of the same user are as follows SIP/XYZ at 119.68.0.90:5060 SIP/XYZ at 202.16.34.10:5678 so dial command with unique-id i want to use will be Dial(SIP/XYZ at 192.168.0.20:5062-096afee8,30,rtT) Dial(SIP/XYZ at 192.168.0.12:64290-0966ab80,30,rtT) and not Dial(SIP/192.168.0.20:5062-096afee8,30,rtT)

We are testing the innomedia ATA's to possibly replace our current line up of ATA's that we are using. Has anyone used their product? What is their track record on stability, voice quality, DTMF talkoff, T.38 Thanks Bryant ---------------------------------------- From: "Zeeshan Zakaria" <zishanov at gmail.com> Sent: Wednesday, October 13, 2010 10:41 AM To:

We had very similar problems to this which drove us insane for ages. Basically we use VoIP trunks (SIP) for all our inbound + outbound calls. Call quality was good however we would get random problems where people could not hear us or us hear them for about 5-10 seconds at a time. After weeks of trying to get to the bottom of the problem it appeared our VoIP trunk provider (sentiro/sip2go) had

For a while now I've been looking for a good web based soft phone solution, but so far no luck. A few solutions which I've tried, both Java based and Flash based, either don't work, or had bad sound quality. I need something which I could put on my productions server for my clients. Seems like good web based solutions are all paid ones, nobody is giving it for free. Any ideas,

Hello list, I need to know how to deal with a redundant network with only one asterisk server, which is receiving registrations from the end points on both of its ethernet ports. This means extension 201 is registering both from eth0 and from eth1. Is there a way/software which can act as a middle man between asterisk and the ethernet ports, and by default sends registrations to asterisk only

Hello list, What servers would you suggest for:100 concurrent SIP calls, 4xT1 card, and a not much busy website, i.e. getting 500-1000 hits a day. Thanks, Zeeshan A Zakaria -- www.ilovetovoip.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101020/8ab7ae3e/attachment.htm

Hello list, I have been using Cepstral's 8KHz voices for my text-to-speech service for some time now, and have been noticing that the voice quality is really poor, doesn't matter what phrase I give it to convert. None of the other 8KHz voices I have ever used were this bad. It doesn't seem good enough system to be used in a commercial system. Is there any better quality text-to-voice

Thanks Zeeshan, SAngoma told me that the asterisk problem is unrelated to wanpipe drivers, they told me to reinstall asterisk again But, i still having doubts about the problem :( Thanks in advance > > Message: 10 > Date: Thu, 18 Mar 2010 00:21:06 -0400 > From: Zeeshan Zakaria <zishanov at gmail.com> > Subject: Re: [asterisk-users] Asterisk DIES with no trace. PLEASE >

For a new project, I have written a dialplan and it is pretty straight forward: The [dialout] context dials out a number, and h extension in this context writes the CDR. But what is happening is that if the callee hangs up first, all values in the CDR are fine, but if the caller hangs up first, the 'dst' column is always 'h'. I put a NoOp right in the begining of this macro to

Hi list, For a client I am setting up a system which will use T1 PRI from Primus, who offer only NI-1 and NI-2 protocols for D-Channels. Previousely I have only used switchtypes euroISDN and National. Although the documentation says Asterisk does support NI-1 ans NI-2, but wanted to get your opinion if you have used these protocols on an Asterisk box and if there were any things to consider. If

Hi list, For a telecom project I need to setup a SCADA solution. I don't have any previous experience in this type of monitoring and automization. I'll be using SNMP data from asterisk servers and endpoints. If anybody has any suggestion which SCADA software can fit in such a VoIP solution, your guidance will be highly appreciated. Thanks, Zeeshan A Zakaria -- www.ilovetovoip.com

Hi everybody, How can we add new contexts in asterisk realtime module? All I could figure out after googling is that a new context HAS to be declared in extensions.conf with 'switch => Realtime/@<databasetable>' under the context name declaration. This works fine as long as we are adding extensions only to this one context, but doesn't give the freedom to add new contexts for

I've got a 778 DID for vancouver, but don't know if it will be a local call if dialed 604 and vice versa. What are the different area codes in Vancouver and why its easier to get 778 DID than 604? -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi everybody, One of my customers wants to buy IP Phones and Asterisk solution, but his requirement is if he'll not be happy with Asterisk, his phones should be able to work with other IP PBX systems as well, so that he doesn't have to buy new phones again. After all IP Phones is the main investment. He'll most probably go with Nortel IP PBX system if he'll be not satisfied with

Hi, Does anybody have experience working with Aculab groomer II, to convert between ISDN E1 and non-ISDN T1, or anything similar. I am looking for sample config files. We have asterisk as ISDN E1, but for testing we set it up as regular T1 if we get sample config files. Zeeshan A Zakaria -- www.ilovetovoip.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

On one of my servers I have many IP phones connected, locally and remotely, and all of them have register expiry set for 1 min. But on Asterisk CLI I see only one of them, extension 502, re-registering every single minute. None of the others re-register or info doesn't come on the CLI screen. This one phone is remotely connected. What is the reason for this. And also everytime it re-register,

Does anybody know how to setup bandwidth.com trunk on asterisk. They provide bandwidth services to asterisk.org, but don't know how to setup up asterisk on their system. -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061214/714bda31/attachment.htm

Hi, MoH volume is uncomfortably high and I want to bring it down. Its mpg123. How can I do it? -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070514/2a40a5d4/attachment.htm

Greetings, How can I call cheap to UK cell phones. I am located in Toronto, Canada, but need to call UK cell phones both from Toronto and London. -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080226/480f7a28/attachment.htm