similar to: Call waiting tone when calling a busy station?

Hi all, I have a strange situation on a Asterisk 1.2.17 with FreePBX 2.2.1 Doing a select in the CDR table I noticed there are some calls with billsec greater than duration, duration is always 0 in those calls. How can this happens ? Am I missing something ? Tnx in advance Regards Edoardo Serra WeBRainstorm S.r.l.

Hi Guys, we're needing a special implementation on Asterisk Our intention is to contribute the development and share back the code to Asterisk community Here is what we need: - An option to Asterisk Dial command which, if used, when calls is answered gives monodirectional audio (Caller should hear the called party but not vice-versa) - A DTMF sequence (maybe handled in features.conf) for

Hi all, I'm having a problem with some Asterisk servers interconnected with each other using IAX (I also tried with SIP without solving the problem) Sometimes, with apparently no reason, some peers become UNREACHABLE (I have qualify=yes in iax.conf) and REACHABLE again as soon as another qualify test is made. Our users are also complaining about audio loss during their calls, apparently

I would like to know if anyone here knows the answer to the following question I need to implement the following conferencing feature for my agents. 1. Agent receives call from caller 2. Agent conferences a verification service 3. After finishing the verification, agent needs to drop third party (Verification service) and continue on the line with caller. My problem

Hello all, I currently have all outgoing calls set to mask the caller id so it will always appear to be coming from our main number. The problem I'm having though, is with both the call detail in mysql and with the automon (recording) feature. It shows the originating number as the number I masked it to, rather than the actual person calling. How can I go about having both the destination see

I am looking for a way to automatically close a meetme conference when either a user hangs up or through an agi call? Some method that would automatically terminate the meetme. Is there a way to do that? Jerry

All, Is there any syntax I can use to put a delay in two lines being dialed? One is a SIP endpoint, the other is my cell phone. I'd like to have the SIP phone ring for some arbitrary number of seconds before it is sent off to the mobile phone. Using something like a Wait() within a Dial() would be ideal. Any suggestions? - sf

Hi guys, I need to realize a sort of automatic call monitoring dialplan. This is exactly what I need: - A user originate a call - When the call is bridged (or just before) I need to invite automatically a third party to the conversation that should hear the audio channel but not speak (it's a monitoring application for a callcenter) The person in charge of monitoring cannot use ChanSpy or

Hi I've few queues configured in * box is there any what that before sending call to a particular queue can we get the status of the queue that is how many agents are available in this queue (logged in, paused, busy, unavailable). thanks arun -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi guys, as I wrote in a previous thread I was experiencing dropped audio (apparently randomly) and SIP + IAX peers getting REACHABLE / UNREACHABLE without reason, servers were in the same LAN. Investingating deeply in the problem I also noticed that 'show channels' command on the CLI, sometimes were returning strange results, for example it wasn0t showing some channels I was sure

hi all, I have a little question about meetme in Asterisk. One of my client ask me that all call can, if is necessary, become conference for 3-4 user during conversation. I think that are 2 way for make this: 1- all call (instead if the users are only 2) are conference 2- using n-way call (http://www.voip-info.org/wiki/view/Asterisk+n-way+call+HOWTO) I decide to implement the first way because

Hello, One of our faculties have Microsoft's LCS and would like to connect it to our Asterisk system. the problem is that Asterisk talks SIP over UDP while LCS talks SIP over TCP with TLS. Anyone can recommend a gateway between these two protocols? Thanks! __Yehavi:

Hello, I would like to implement a few decision making process inside the dialplan using information stored in MySQL (like LCR, etc.). I see the MYSQL() application, but as far as I understand I have to connect to the database each time I want to query it; this seems a CPU eater to me. Is this indeed the case, or can I open it once Asterisk starts and leave it open?

Hello, I see that most people are using the extensions.conf syntax (most of the examples and questions here use that syntax). recently I've translated all my dial plan to AEL syntax and I find it much easier, especially when you need IFs. Why most people don't use it? Am I missing something? Thanks! __Yehavi:

Hello, I tried a few months ago to use IMAP with Asterisk; I used either 1.4 or the latest SVN at that time (sorry, don't remember). After a day I had to remove it since Asterisk crashed, mostly in the IMAP client code (the code of UW IMAP). My users wants IMAP back (they loved it) but not in the price of crash... I could not reproduce the crashes at the lab. They only occour on the

hi all we want to use Two single port Bri cards in Trixbox. Any idea which card is having good support and performance repotation especially when using two or more in Trixbox. Regards farooq --

Hi guys, I need to realize a sort of automatic call monitoring dialplan. This is exactly what I need: - A user originate a call - When the call is bridged (or just before) I need to invite automatically a third party to the conversation that should hear the audio channel but not speak (it's a monitoring application for a callcenter) The person in charge of monitoring cannot use

> On Sun, 18 Mar 2007, Yehavi Bourvine +972-8-9489444 wrote: > >> Hello, >> >> >> On most SIP phones a conference call is done on the phone and is limited to 3 >> participants. Polycom phones has a configuration option to use a conference >> server instead of the internal conferencing feature. I guess I need some >> conference server; any experience

Hello, I am running a small installation of asterisk and looking for future expansion of it to handle thousands of users. From what I read I see that usually large installation place OpenSER (or similar solution) in front of Asterisk in order to provide high call rate because "OpenSER does only signalling while Asterisk does all". My question is: If Asterisk also does only signalling

Hello. I'm trying to use gmail's imap feature w/ asterisk imap voicemail. I compiled c-client with the following settings: make lr5 IP6=4 and asterisk with: ./configure --with-imap=/usr/src/imap-2007a/ However if i enable any if the imap settings in voicemail.conf, asterisk starts acting funny and dosent allow any calls imapserver=imap.gmail.com imapport=993 mapfolder=Voicemail Where