similar to: is dundi worth pursuing in this situation?

Following the successful deployment of asterisk servers at several of our branch offices, in the near future, I'll likely be implmenting an asterisk server at our HQ. We currently have a T1 PRI terminated on a legacy PBX. I'll be doing a stepped deployment in which, via a dual T1 linecard, the asterisk server will initially pass all incoming/outgoing calls directly through to the PBX.

hi: i am new to asterisk and dundi. we have some branch office which will use asterisk in the future. they will form a full-mesh structure so every site can contact each other directly. i want to try setup dundi, then we don't need to modify every pbx when a new site add in the cloud. thanks to the great dundi document "caveman can do it" and other resource in the

I've been working with a telco for the past two days trying to get a PRI span up and running. This is a small-ish telco and I get the feeling they don't do this very often. Anyway, they specified a pretty standard setup: ni2 switchtype, esf framing, b8zs coding, etc. All of my b-channels are up, but we're having a heck of a time getting the d-channel to come up. He finds out that

Hello List, This is our setup which we are trying in a couple of our remote offices: +---------------------------------------+ +-------------------------------------------------------------+ | | | | | +----------------+ |

We use only IP connections to our asterisk boxes. Given this our origination/termination providers usually send/receive traffic to/from our network on a single IP or limited number of IPs. In a DUNDi Asterisk Cluster, would each of the boxes need to be able to connect to our origination/termination providers directly, or would we need to setup a common gateway box to forward calls to/from our

> I have 2 PBX's, one in each office (say one in New York, one in Boston). I > have mobile users that can show up at either office and connect their soft > phones. > > > > Is there a very simple DUNDI config available which describes how to set > this up? > > Also, can I have the same outbound trunks setup in each office, so that > calls don't have to

Is there a way to have a dundi host advertise extensions for another server? A-----------B-----------C I'd like A to reach C through B. A and C would handle the call, B would just be the DUNDi intermediary. Assuming A has 101-199 B has 201-299 And C has 301-399 A sample dundi/extensions/iax config for B is all I need. I can get single DUNDi queries running fine(A->B, B->C,

This is driving me nuts. Why doesn't the DUNDILOOKUP function return the weight of a path to a number? The CLI 'dundi lookup' command does. What about the mac address and expiry period? The CLI command returns those, but the DUNDILOOKUP function does not. Why? We absolutely need this in order to perform out routing logic. It has become quite apparent to me that DUNDi is _NOT_ suited

Greetings list, Wondering if anyone's come across this before. I've configured a couple of our servers with a "privatedundi" context to allow calls to still flow between extensions even if they're registered to different servers . The DUNDi lookups seem to work fine, evidenced by the following on the originating server: -- Called

Hi: Can anybody point me to some guidelines about SMB network design or give some advice? Samba HOWTOs are very detailed recipes, but I need some general tips, like if we are serving fish or pasta tonight :-) This is the situation: a WAN with 20 offices with 2 to 30 people in each, plus a headquarter with 50 people, plus the databases and central file servers. The organization grew up on a NT4

>From the reading and testing I have done it doesn't look like SIP supports a username and password in the Dial string. I currently have the following mapping. priv => dundi-extens,0,SIP, dundi:pass at 1.1.1.1/${NUMBER},nounsolicited,nocomunsolicit,nopartial On the sending side I see NOTICE[31598] chan_sip.c: Conflicting extension values given. Using 'dundi' and not

I have three Asterisk boxes. Each has the following in dundi.conf: 180net => dundi_local,0,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx1,1,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx2,2,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx3,3,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial My iax.conf on all three

Are there DUNDi CLI commands for Asterisk 1.4? I have searched google and I only see the dundi commands in Asterisk 1.6, although I see reference to them in older version's of Asterisk such as Asterisk 1.4 here: http://www.asteriskguru.com/tutorials/cli_cmd_14.html. When I view the CLI commands through help I don't see any of the dundi commands and there are errors when I run a command

Hi, i'm having asterisk with sip working fine, including dundi lookups. The only problem i'm having is that the dundi answer allways contains my internal, private ip. Is there any way to set the targeting ip that is sent out in the dundi answer (to my public ip or any other where i want to receive the call)? Regards, Andreas.

Hi. I am trying to pass a variable from one Asterisk PBX to another. I'm using DUNDi with IAX2. Is there a way to do it? I tried the following but it fails. On peer1: [dundi-outgoing] switch => DUNDI/priv exten => s,1,Set(CDR(userfield)=test) exten => s,2,Set(DUNDIVAR=${ARG1}#TEST) exten => s,3,NoOp(Passing ${DUNDIVAR} to DUNDi peer.) exten => s,4,Goto(${DUNDIVAR},1) On

With all of the recent talk on the list about DUNDi, I have a question. From the outset it appears that SER is often used for high availability solutions and as a tool for almost clustering Asterisk boxes behind it. It appears to me that DUNDi is providing a lot of this as well. Now I know DUNDi is not an application by itself to proxy SIP requests but can I hear any information out there that

Excuse the possibly stupid question, but what exactly do these letters mean, following the word WINE? I only heard about abbreviation "headquarters" and "high quality".

Hi all, I'm planning to deploy many Asterisk servers for remote sites connected through IAX. Behind each server, there will be many sip clients connected. A sip client from one site must be able to make calls for the other sip clients connected to the other remote Asterisk servers. I've heard that DUNDi is a good option in order for each Asterisk server to locate the right (or the

Does anyone know where I can find some good DUNDi docs? The ones are dundi.org are absolutely horrible. The examples in dundi.conf are pretty much useless. I still can't figure out why Digium can't write some good documentation. It's their 'baby' after all. This really drives me nuts and pisses people off in general. I've been dicking around with DUNDi for over 6 months and

Hi Well it is well some time that my last DUNDI peer has become unreachable. I guess too many issues with spoofed numbers etc. But I am wondering, do people, especially larger entities like telcos, still use DUNDI? I know that in some Hamradio communities, DUNDI is used to interconnect PBXes, but that is with private phone number ranges, not connected to the public. Want some DUNDI peering?