similar to: Problem with TDM2400 and Polycom 501... Voice Quality Lost...

Hi List, I'm trying to connect Asterisk with a Nortel Meridian using an E1 with MRFR2 signaling. I've connected both cards, and compiled all the required software... The problem is every call (outgoing or incoming) got dropped, complaining about some "T1 timed out" Only for testing purposes I'm using an application called testcall included on the lib-unicall package, and

Hi guys, I have this question: Can asterisk + fax for asterisk do this ?? Send Fax on Machine A to Fax machine B?? Fax Machine A--> FXS port on digium card --> asterisk 1.6 --> Sip with t.38 --> internet --> Sip with t.38 --> asterisk 1.6 --> FXS port --> Fax Machine B I've been reading documentation for fax for asterisk, but I'll appreciate if someone can

Hi, I'm trying to connect an HDL F10 device for a friend living in Brazil to the TDM2400 on his Asterisk server. That device should behave like a normal doorbell and it is if connected to an analog PBX. I connected to the TDM2400 and everything works fine except for one thing: when the called party hangs up his phone, the F10 HDL device does not hang up. I'm not brazilian and not

We have a recently deployed server with a new TDM2400 card that will not put dialtone or audio on FXS ports after the physical server restarts (though they will ring if called, there's just no audio on the line if the phone at the other end picks up). The symptom can be resolved by stopping Asterisk, restarting DAHDI, and then restarting Asterisk. So far, this has happened on both times the

Does anyone know if a TDM2400 will fit into a Dell 2850? Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - <mailto:kerryg@techdatapros.com> kerryg@techdatapros.com <http://www.techdatapros.com/> http://www.techdatapros.com -------------- next part -------------- An HTML attachment was scrubbed...

Good Day List, I'm having some issues with echo cancel on my Asterisk box, and have done extensive reading and have gained some useful pointers from this list but have a couple of hopefully fairly simple questions. The Asterisk box is connected via 20 FXO ports on a TDM2400 with the Hardware echo cancel module. Echo cancel almost works, but the users hear what they describe as a

Hi, >From a chat with Kevin Fleming during last Astricon Europe in Paris, I understood that Digium was about to support TDM bridging with TDM2400 board. This feature had to be introduced with 1.4 release. Is my understanding correct ? If correct, would it be reliable enough to bridge 14400b/s fax calls though I know, fax were not officially supported or shall I use Sangoma boards for that ?

does TDM2400 work on 3.3v pci slot? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070211/ac7d0c79/attachment.htm

Hi, What version of asterisk and zaptel are you using? I've used digium TE110P card with mfcr2. I had same "T1 timed out" problem too. I've asked from support and got answer to install latest zaptel. I've installed zaptel 1.2.13 and it solved. In short try latest asterisk v1.2.x packages with unicall. >> Hi List, >> I'm trying to connect Asterisk with a

Hi guys, Hope someone can help me with this... I got an Asterisk with TE120P card... using dahdi 2.1.0.4 and asterisk 1.4.24. The problem is the link between the card and the telco... suddenly through the day looses connection... and the people on site just power cycle the PC and the problem got fixed.... for a while.... I've already replace the cable between the card and the telco. Telco

Hello list, I am encountering a bit of a problem in working with incoming calls with a TDM2400 and * 1.2.4; when a call comes in, * will correctly detect the ringing, but will sometimes report multiple "Attempting native bridge". What I do is basically that when a call comes in, I dial a different box through the same Zaptel interface and I get logs like this: [call comes in]

Hello, I've installed two Digium TDM2400 cards on my server. One has 24FXS and the other has 16 FXS and 4 FXO. They are both connected to power. Unfortunately some of the FXS module fail to initialize and I find following messages in the logs (the rest of the FXS modules work well). Could someone give me some advice? !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 Feb 9 18:09:45

Hello All I have a TDM2400 card with 4 FXO, and the the following problem: This card answered all the calls, but for the caller, the call is ringing and I don't hear nothing when it has picked up. Here is piece of my log: Thanks for any help. == Starting post polarity CID detection on channel 21 -- Starting simple switch on 'Zap/21-1' -- Executing [s at entrada:1]

Hello Fellows! I have a TDM2400 and I can't put it to work. Every time it receive a call the Asterisk handle it and call the SIP phone; when people pick up the fone they don't hear nothing and the caller hear the phone rings and nothing happens. In Asterisk console I can see the message answered by the SIP's phone. I lost a lot of time trying to solve this problem without success :(.

Muchas gracias Carlos, la lógica es perfecta pero no se como identificar con código las lineas en blanco entre el bloque 2 y el bloque 3. Para de esta forma quedarme solo con el bloque 2. Tienes alguna idea? Muchas gracias. Joan 2016-07-28 17:00 GMT+02:00 Carlos Ortega <cof en qualityexcellence.es>: > Hola, > > Se me ocurre esta solución en pseudo-código...: > > >

I am currently running Asterisk 1.2.8, on an AMD Sempron 3100+ (ASUS K8N Nforce based board). I am using a Digium wctdm24xxp to terminate 8 (2x quad) FXO lines. Using ztmonitor (From zapata) I cannot see that there is any registerable incoming volume from these lines. I've been running them at rxgain = 25 (zapata.conf) to make the audio audible, however this creates poor call quality issues

Hi all, Years ago, I was pretty sure attempting to use two TDM400p cards in one machine was recommended against by Digium ... probably because the cards couldn't hack it, and/or interrupt problems etc I have seen some posts recently that seem to indicate it is in fact possible these days thanks to some updated firmware perhaps? ..... I just need to have two in the server because the 4 ports

Hola a todos, tengo 170 .csv donde tengo que eliminar las primeras 20 lineas (primer bloque) y luego todo un último bloque de datos (tercer bloque) que está separado por dos filas sin datos del segundo bloque (que es el que me interesa). El tercer bloque empieza en cada .csv en una linea diferente por lo tanto no se si puedo automatizar en R quedarme tan solo con la información a partir de la

Hi all, I have a TDM2400 full of FXS cards and a TDM800 full of FXO cards. If I have a fax machine on the FXS port dialing out through asterisk on the TDM800 FXO, should I be expecting any problems? Or should this just work as expected? (ie, flawlessly with the asterisk box essentially transparent to the whole operation). I am doing it this way to allow many faxes and modems to share a dial

Is there a way I can change the ring cadence on FXS lines on a system using a Digium Wildcard TDM2400 card? I recently deployed a new phone system, and the customer has a few POTS phones in areas where they don't have data network services, so we're using the FXS lines to provide dialtone at those outbuildings. The old phone system would ring those phones with a short ring-short