similar to: Digium TE205P and channelbank

Hi all, I've setup a PBX in production environment last week but we have immediatly find out drop conversations and lot of errors (in asterisk logs) like: Apr 10 17:30:48 NOTICE[25154] chan_zap.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2 My configuration is: Motherboard: SuperMicro P8SCT (Intel E7221 chipset) Hypertrading and APIC enabled CPU: P4 3GHz Digium TE205P

Hi All. I'm working on an * configuration. We require 8 inbound POTS lines, and CT1 or PRI seems like it will be quite expensive at that level. I've read that a T1 Channelbank plus the T100P would be a (the?) way to go for this situation. What is the recommended channelbank for use in this scenario? From searching the archives I see a lot of suggestions to get "a

Ok, the Zhone sucks and the Adtran 750/850 seems to be a little too expensive. Can anyone recommend a decent channelbank that won't break the bank? TIA, -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 ~ 866.477.5638 Pulaski Chamber 2002 Small Business Of The Year

Hi ..., I've a TE205P card installed in my asterisk box.Port 1 of my card is connected to service provider.From port 2 I want to connect Avay Partner system. what type of cable I require to connect the partner system (straight/cross over). How the call routing from outside will be done to epbx. Thanks inadvance regards rudra -------------- next part -------------- An HTML attachment

Hi list! The stability of * with fax (or the lack of it) is causing me headaches. To solve it, I was thinking to put a TE205P card in the * box, connect the E1 pri on one port and a channelbank (I was thinking of the Rhino) on the other port in T1 mode. (Has anyone tried this??) The TE205P supports channel bridging which sounded like the ideal (but not cheap) solution when combined with a

Hi, I am having problems with an Asterisk with a Digium TE205P card. The issue is that the Ring Back Tone is noisy. I am making modem's calls and this noise influences on the initial negotiation protocol, so modems have to recall. My configuration is: Asterisk version: Asterisk 1.4.21.2 Linux version: CentOS release 5.2 (Final) Card: Digium TE205P

Hi i have a PRI connected to a TE205P. Actually, can i send and receive FAX through Asterisk using stable solutions? Or shall i connect an ATA to Asterisk and then a modem with Hylafax? -- /*************/ nik600 https://sourceforge.net/projects/ccmanager https://sourceforge.net/projects/nikstresser

Hey folks, I have a Digium TE205P working as a man in the middle: PRI line -------- Asterisk/TE205P -------- PBX The PBX is a Panasonic KX - TVP 100. Everything is working great except for one little issue. Asterisk isn't hanging up the PRI B channel when the PBX channel is hung up. I don't want to overload you with information but please ask if more is needed. I suspect I'm

hi i'm trying to configure a TE205P on asterisk@home i've edited /etc/sysconfig/zaptel adding this line: MODULES="$MODULES wct2xxp" now, when the system is loading, i can see that the wct2xxp module is loaded correctly but if i try the command: /usr/local/sbin/genzaptelconf i get: STOPPING ASTERISK STOPPING FOP SERVER Generating '/etc/zaptel.conf' Generating

Hi guys, Currently I just purchased the TE205P for the installation of my ISDN30 setup. I compiled, setup the card correctly I think. When I do the ztcfg -vvv it shows all 31 channels clear, with 30 bchannels using for voice ranging from 1-15, 17-31, and 16 is the dchannel. However, when I do a cat /proc/zaptel/1 I see only 24 channels configured, and then, when I do a cat /proc/zaptel/2 I see

I have a TE205P, jumpered for E1, added the missing wct4xxp-line to /etc/modprobe.d/zaptel, zaptel.conf is just span=1,1,0,ccs,hdb3,crc4,yellow span=2,2,0,ccs,hdb3,crc4,yellow bchan=1-15 dchan=16 bchan=17-31 bchan=32-46 dchan=47 bchan=48-62 Which, according to my reading of the documentation I could find, should be correct. ztcfg doesn't complain about anything, yet all I ever get is RED

Hello, I am working on a project and have a few questions. I want to connect one port of the TE205p to the PSTN, and another port to the PRI port of a PBX. Basically Asterisk will sit between the PSTN and the existing PBX. Are there any gotcha's I need to be aware of? Will the existing PBX be able to dial through asterisk as if it was a PSTN connection? -- Isaac McDonald Got VoIP? imcdona

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 2730 bytes Desc: image001.gif Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040113/2fec80ee/attachment.gif

I am sending a call down a E&M wink trunk to a adtran tsu600 channelbank. The extension is setup like so... exten=>799179,1,Dial(zap/g2,20,D(9179)) exten=>799179,2,Hangup() It should Dial the Adtran and send some DTMF signals to a telephone on an fxs module in the Adtran. Asterisk is seeing the call answered when the T-1 is picked up by the Adtran not when the ringing phone is answered.

Hi, I'm looking for IBM hardware to support: 100 SIP hard phone users 10 fax machines on SIP ata's maybe later an additional 100 sip soft phones. Initially, all calls will be through PRI. Some conferencing. Don't know yet if this will even get used. Using 1.4 + ( probably business edition ) I'm looking for anyone who some experience / gotchas. I've google'd and

New never used bought by mistake ( 5V pci slot ) and stored... pls make offer, thanks and regards, Jean-louis Curty The TE207P is a bundling of our leading TE205P product and our new VPMOCT064 Octasic DSP-based echo cancellation module. The TE207P is Digium's and the industry's first two-port digital card featuring hardware-based echo cancellation. The new module enables users to

I have recently installed Asterisk Now Beta 4 (32-bit) with three Digium cards - 2 Wildcards TE400P (one with 4 FXS modules and one with 4 FXO modules) and a TE205P dual E1/T1 card. The problem is with the TE205P and configuring the /etc/zaptel.conf and /etc/asterisk/zapata.conf files. I go in and add the required lines to configure the TE205P and restart Asterisk. All is fine until I reboot the

What kind of channelbank/FXS port are you connecting to? I've seen problems connecting to some of the older versions of the Adtran Total Access 750's. I wouldn't doubt there would be problems on other channelbanks with older firmwares. Of course, no firmware on CAC AB1's I have the AAstra 480, Adtran 750 Channelbank (updated firmware), T100P card, and it worked fine on the

I've been working with Digium, but hopefully someone on-list has an idea... The card will transmit audio to the T1, but everything it receives is completely unintelligible static (in place of received audio only, not all the time). I've verified everything on Digium's troubleshooting checklist and they were unable to find anything when they logged in. zttest yields 100% for the