similar to: Outside Network PAP and also Outside Network eyeBeam Soft Phone

I am using eyebeam and I am happy with it. However, it is boring just to talk to my son in the other room. Whenever I try to convince somebody to buy eyebeam, they are scared of the price. Is there a free video soft phone available, that will work with eyebeam / asterisk? bye Ronald Wiplinger

I am trying to connect two Xten eyeBeam Video Phone No problems in voice connecting. I tryed to modify my sip.conf [general] language=it videosupport=yes ; enable Asterisk video support port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=h263 allow=gsm allow=ulaw allow=alaw ; H.263 is our video codec ;

I am having problems with Eyebeam when the user dials a number that is not available. This problem exists with both Asterisk 1.4 and 1.6 using Eyebeam or Xlite. The problem seems to be that when the soft phone receives the 503 Unavailable response it will not be able to dial another number for a few minutes. Anything you dial will say that the number is unavailable and it will not even send the

-----Original Message----- From: Ferguson, Michael Sent: Tuesday, February 01, 2005 11:35 AM To: 'asterisk-users@lists.digium.com' Subject: Messaging with * and eyeBeam G'Day All, Eyebeam has gotten my interest but I do not have a "high-altitude" view of its interraction with *, therefore my questions. I called xTEN but they preferr to talk to telcos and ISP's

In an attempt to eliminate audio echo I upgraded one side of a working x-lite to x-lite connection to eyebeam. No joy, and what was worse is the audio was even worse now - just noise. Ok, I upgraded the other side to eyebeam and same thing. I'm not even using video (will enable it in sip.conf later, one change at a time). The connection looks something like: eyebeam client

G'Day All, Eyebeam has gotten my interest but I do not have a "high-altitude" view of its interraction with *, therefore my questions. I called xTEN but they preferr to talk to telcos and ISP's purchasing hundreds of the eyebeam software... Kind-a stuck here. I already have * happily running and taking care of business on my Windows network. I also have Windows IM running on

Hello I'm using eyeBeam, and Asterisk keeps sending my clients a second call, when they are still in one call (because eyeBeam has lots of channels). I was using X-Lite (with 3 channels) and Asterisk never sent the client a second call. How can I force Asterisk (or eyeBeam) just to send one call at each time. Is this a configuration I need to do in eyeBeam or Asterisk? Thanks Regards Joao

G'Day All, Eyebeam has gotten my interest but I do not have a "high-altitude" view of its interraction with *, therefore my questions. I already have * happily running and taking care of business on my Windows network. I also have Windows IM running on my exchange server and users a IM'ing quite a bit - all internal though-. While I would prefer to use * and eyebeam, I am quite

Lately I have been getting many complains that Eyebeam crashes when you dial a number that does not exist. This happens in both R2 and ISDN PRI lines. The softphone stops working and has to be restarted. The response I got from tech support was: the actual issue is that asterisk should not be sending a 503 service unavailable when a particular softphone is not online. The soft phone stops

Hi All, So I've been exploring the use of G.722 encoded wideband audio recently. I have three different SIP devices that allow this: Eyebeam, IP650 and a Siemens S865IP. The Siemens and IP650 seems to work fine together. Calls pass between them in what the Polycom notes as "HD" mode and the audio quality is certainly very good. However, things are not so easy with Eyebeam and the

Lets presume that my both software are open. Xlute and Eyebeam But I want my calls from Asterisk to land only on Eyebeam and Not on xlite. How to set it ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090129/4011be6c/attachment.htm

Hi, I'm trying to find how to configure Asterisk 1.2.7.1 to allow two EyeBeam (3015c) to send Instant Messages between them... But I cannot find anything that explains how to do it! Anybody as a clue? is it possible? Now, when we try to send an Instant Message in the eyeBeam it says: "User not available". In asterisk console appears a message saying: ------ Apr 18 17:13:22

Just come across a problem - we have sent out heaps of PAP-2 ATA's and just discovered that when joined in a conference they are choppy on the up leg (so the other users in the conference will hear them with a choppy sound) but the down leg is perfectly fine (so the end user can hear the conference participants perfectly). I have tested the same setup with different brands of ATA's

Hi, Recently I been using EyeBeam with Asterisk. I can make calls with video, I'm using two PCs with EyeBeam but I noted that I can't enable only one client to stream video, I mean if I start streaming video on one client the other one doesn't receive any video until it starts streaming video itself. So I cannot have unidirectional video calls. I remember this problem with

Hi! I use Bria and eyebeam and it seems that asterisk doesn't send RCTP keepalives when a SIP channel is on hold. This is a known issue as is described here: http://www.voip-info.org/wiki/index.php?page=Asterisk+phone+Bria This gets very annoying because very often people are put on hold longer than 30 seconds (the phone's default.) In a company with more than 100 soft phones

I have a Linksys PAP2. Identical setups for the two channels in both the unit and in Asterisk. In particular, both channels enable g729 and set it as the preferred codec, and have disallow=all and allow=g729 in sip.conf. If we make a call on one channel, it works (and uses g729), but if we make a call on the other channel when the first one is still connected, it fails. We have three g729

Hello Everyone I just bough my Xten Eyebeam but i don figure out how to make the video works i only see a black screen where de remote video suposse to appear, Any help regarding this matter will be very preciated Thank You

Hello all, I was wondering if its possible to hook up eyebeam with video support to asterisk@home? Thanks Dinesh. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050913/0613e625/attachment.htm

I am looking for a SIP Soft Video phone, which I can use with Asterisk. If you have one installed (regardless if free or purchased) please tell me which one, the settings in Asterisk and your experience with it. bye Ronald

What's the status on using eyebeam with Asterisk, does it still require a patch to Asterisk to support the video component? I'm intererested in starting to use Video and audio telephony but wary of anything that requires patches. -- Chris Mason NetConcepts (264) 497-5670 Fax: (264) 497-8463 Int: (305) 704-7249 Fax: (815)301-9759 Cell: 264-235-5670 Yahoo IM: