similar to: Mediatrix 1204

I never heard anything on the AMP list, so figured maybe someone here might be able to help me sort this one out.. I was making some updates to my attendant config, which is really very basic, and now incoming call processing stopped. Not sure exactly what the heck happened, but figured maybe someone could help me with a clue as to what broke. Now incoming calls are not being answered at

I'm getting unstable behavior with my newly installed TE110P T1 card. It hangs up any incoming call anywhere from 20 seconds to 6 minutes. Frequently, when you call back on our incoming T1 there'll be an automated announcement (maybe from the telco?) stating "we are unable to complete your call at this time". I simultaeously get a yellow alarm on the system and shortly

Hi all, Please excuse my newbie status I need help in configuring a mediatrix 1204 PSTN gateway with asterisk. Basically each FXO port is configured with a SIP username and automatic transfer extension, which should transfer incoming calls to an asterisk extension. I created extensions corresponding to the FXO port SIP usernames. Port 1 - SIP username - 21383396 - call forward to - 300

Hi all, I just got a Mediatrix 1104 evaluation unit -- a 4 port fxs sip gateway. There's no printed documentation shipped with the unit, but I have a piece of software for windows that shipped with a different model (which I haven't tried configuring yet), that uses snmp to set misc variables (ip settings, sip stuff, etc.). Fairly baroque interface & pretty slim on help...

I am trying to configure MeetMe so that external callers can enter the conference rooms after an IVR menu. I have created Conf rooms for all internal Ext's with a prefix of 8. When I call into the system from my vonage trunck the IVR picks up but will not let me dial a conf room. It tells me it is a invalid extension. Can anyone help with a sample conf on this? Thanks, RC

Hi, I've one Sipura SPA2000 at home behind a linuxbox with two network adapters (eth0 for WAN and eth1 for LAN) doing NAT/DHCP: ___________ HOME _______________ ____OFFICE ____ SPA2000 <---> Linux Box <--> Asterisk Box 192.168.0.253 192.168.0.1 eth1 200.93.xxx.a 200.93.xxx.b eth0 My problem is when I try to call to any trunk or extention

I just signed up for the BroadVoice service a few hours ago, but for the life of me I can't get any incoming voice. The incoming connection is fine as it rings my extension from outside, but I can't hear anyone talking. Outgoing voice is working fine though. I've been looking through the archives, but I haven't found a solution to the problem yet. I even tried another router

Hi, thanks. Sorry for the mess with my gmail account... This made the route go away. But is this the right way to configure tinc? To give the tinc interface an IP (with 255.255.255.255 subnetmask) from the local (green) network it does route the traffic to? Does it make sense to give the tinc interface an 192.168.0.253 IP, when the net here is 192.168.0.0/24 on eth1 I can not find such a

hi, suppose i have firewall with an ethernet interface eth1 for the internal local zone, but in the local zone i have a router which connected to some external offices internal lan. the external office has no other net access just through this line. in orther to be able to define rules and filter the traffic, the router internal interface should have to be in different network then the local

Hi, I am trying to list the shares on a windows ME machine and I am getting the following [root]# smbclient -L 192.168.0.253 added interface ip=192.168.0.1 bcast=192.168.0.255 nmask=255.255.255.0 session request to 192.168.0.253 failed (Called name not present) session request to 192 failed (Called name not present) session request to *SMBSERVER failed (Called name not present) I have also tried

Hello, i have had a terribe day today, why? because i have been so 4 or 5 hours trying to do work this and i have not finished it. I feel very pleased if anything can help me. I have two isp connections: eth0: dhcp ip1: 82.198.*.* gw1: 82.198.*.* and a router adsl in ip 192.168.0.253: eth1: static ip2: 192.168.0.254 gw1: 192.168.0.253 the same machine has 3 more networks cards but i am

Thanks Tom Sorry, I was wrong, this is the correct question... I have this configuration: | Email Server 192.168.0.253 | ___|___ Port 25 SMTP ___|____ ____ | LAN |-------------------------------------Eth1

Hi I have been using Shorewall for a while now and find it very useful and easy to configure, I am learning iptables and having trouble getting the bridge to successfully work with squid, although I get it working with Shorewall straight away? Does anyone know the rules to successfully use squid with a transparent bridge? Internet – router - (bridge eth0 – eth1) – local lan auto lo iface lo

Has anyone played with this phone? i cant seem to get it to work properly, i manged to get it registered and can make calls from it, but i havent been able to make it receive calls. Weird thing its that if you make a call from it and while you are on that call you dial its number does calls go thru in second line, but as soon as you terminate both calls it wont recieve any calls again. Heres

Hello, In my scenario, the asterisk machine is installed behind a CISCO mediaGW in order to be able communicate with the PSTN. Asterisk is configured to use T.38 to send and receive faxes. I'm trying to receive a fax from a fax machine located in the PSTN. Apparently everything goes well: the fax machine says the transmission was successfully completed, and the fax file is successfully

Hello, My server is Mandrake10.1 eth0 is WAN with static IP eth1 is LAN I would like all traffic from 2 client - 192.168.0.253 and 192.168.0.248 on the lan to go straight to outgoing interface. I am not sure whether to use DNAT or ACCEPT. Can anybody clarify ? Thanks Varun

Hi, I''m trying to do some horrible private address routing between networks. Is there a way to handle the following? I''m guessing policy routing *might* be the way, but anyway... Two networks, accessible via public addresses -- a /29 on each. Each network, however, has more machines than this, so one also has 192.168.0.0/24 and the other has 192.168.1.0/24. I have an IPIP

Hi :) I hope this short example shows what problem I have: # returns users homedir from /etc/passwd grep user1 /etc/passwd | cut -d':' -f6 # result: /home/group-subdir/user1 And the logfile... #maillog imap-login: Login: user1 [192.168.0.253] imap(user1): mkdir(/home/user1/Maildir/.Trash) failed: No such file or directory Why Dovecot tries to create /home/user1/Maildir/.Trash

Hi, Having some problems with the default pattern in the pop-before-smtp.pl.conf file for dovecot. Also the one off the dovecot wiki doesn't seem to work and since I can't seem to figure out how these patterns work I hoping someone could help me out with a custom pattern. This is what my mail log looks like: Apr 8 23:30:40 nemesis dovecot: pop3-login: Login: user=<bjorn>,

I am totally new to this project, I have been trying to set it up now for almost a whole day, and can not understand what is wrong. The following error appears when my phone tries to register: Oct 6 19:08:30 NOTICE[98310]: chan_sip.c:7519 handle_request: Registration from '<sip:2201@192.168.0.5;user=phone>' failed for '192.168.0.253' What exactly does this error mean,