similar to: Linux IAX client to zaptel voice quality issue

Previous mail did not go through. Following up... Carlos G Mendioroz @ 16/09/2007 13:27 -0300 dixit: > Hi, > I'm seeing a problem using AgentCallbackLogin (Asterisk 1.2.16) where > a call in queue while an agent is logging in results in the agent > getting the call without properly being logged in. > > This seems to be a race, although I've not (yet) pinpointed the code

iaxComm is a crossplatform open source softphone utilizing the IAX2 protocol. It is distributed as part of Steve Kann's iaxclient library. I've just posted new Windows, Linux and Mac OSX binaries to sourceforge. The Windows binary was compiled on WinXP. The Linux binary was compiled on RedHat 9. The OSX binary was compiled by Andreas Wrede on 10.3 and was tested on 10.4 (Tiger) beta.

Hi, in a PRI setup, the receiving side is changing the B channel at proceeding. It seems this sometimes breaks some logic (pri_fixup_principle) and then the hangup kind of breaks, release is not answered and a restart cycle is triggered (by remote side). Anyone can help me debug this ? I've seen many posts with simmilar issues but no answer/solution. This is happening on Asterisk 1.2.16 +

iaxComm is an Open Source softphone for the Asterisk PBX. iaxComm compiles and runs on Win32, Linux and Mac OS X systems. Sources included in the iaxclient library: http://iaxclient.sourceforge.net/snapshots/iaxclient.tar.gz Precompiled binaries at: http://iaxclient.sourceforge.net/snapshots/iaxclient.tar.gz Features: * Register with multiple servers (ie enterprise server and iaxtel).

iaxclient.sourceforge.net is the home of Steve Kann's crossplatform port of the iax library. iaxComm is a client written in c++ using wxWindows. There is a Win32 binary on the site. I think that it should be compilable on Linux and MacOSX, but can't test it. Feedback is welcome.

Hi, I seem to be having problems with IAX clients based on the iaxClient library. I have been working on my own client (an augmentation to the Call Manager I released last week) and it seems to regularly miss incoming calls entirely. It also occasionally misses the drop signal when the remote end drops a call. Has anybody else seen this kind of behavior? I have tested with my client, with

iaxComm is an Open Source softphone for the Asterisk PBX. iaxComm compiles and runs on Win32, Linux and Mac OS X (Panther) systems. Recent Changes: * Improved jitterbuffer code * Steve Underwood's Packet Loss Concealment Code Features Include: * iLBC support * GSM support * speex support * ulaw and alaw support * Blind Transfer. * Custom Ringtones per

I tracked down the problem with crashes at startup (and with no window appearing). I was trying to make the last column of the call list as wide as possible when resizing the window. With some display settings, the reported width of the client window is off by 1 pixel. Instead of automagically adding a scrollbar, wxWindows starts running around in circles. Sooner or later (sometimes much

iaxComm is a cross-platform IAX2 softphone available for Win32 and Linux. Win32 and Linux binaries as well as the LGPL source are available at: http://iaxclient.sourceforge.net Recent improvements are a less cluttered user interface, audible ringback and audible outgoing ring, and of course IAX2 protocol support. iaxComm is based upon the wxWindow GUI framework and compiles on Microsoft

I don't want to rain on Dan's parade, but I'd like to call everyone's attention to an existing project. Steve Kann has developed a crossplatform IAX/IAX2 library, and there are a few clients available for it. I have written iaxComm using the wx toolkit. It compiles and runs under Windows XP using the MinGW tool chain. A precompiled IAX only version is available at

Hi, I have a problem with my IAX softphones. After a call, when the softphone hangup, it remains unavailable for the other softphones. It can call anybody, but can not be reached... For example, if A call B, B answer, then A or B hangup, and C won't be able to call A or B after that (but A or B would be able to call C). The Dial function returns that the chan is unavailable. That is very

On Thu, 08 Apr 2004 10:14:09 -0400, Steve Kann wrote: >Gary wrote: > >>I have noticed lack of codec negotiation with calls thru a registrated >>asterisk box. >> >>No seen problems with outbound calls, (though I haven't specifically >>tried it), but the problem exists inbound. >> >>Easiest method for testing this was ring in via a sip client set

Hi, I'm trying to use iaxcomm. I can place a call from the softphone, but when I place a call to it, when I answer I get ... NOTICE[16401]: File channel.c, Line 1094 (ast_read): Dropping incompatible voice frame on IAX2[paulohm]/3 of format GSM since our native format has changed to ALAW My iax.conf looks like this .. [paulohm] type=friend host=dynamic username=... secret=...

Hello all! Has anyone expirienced the following:? With an IAXclient softphone (like diax/iaxcomm/etc) Dialing to the PSTN (zap) or a SIP device has no problems .. but when I make calls between 2 softphones I have weird problems.... in about 4 out of 10 IAX-2-IAX softphone calls I get a big delay .. in the beginning of the call it's all okay... (delay < 0.5 sec) but the longer the call

Hello All When I open up iaxcomm, it registers fine with the asterisk server. If I call into it, iaxcomm will ring; however if I leave iaxcomm sitting idle for awhile (I haven't figured out exactly how long) it seems to miss calls. I can see the calls coming in on the asterisk server but they never ring through on iaxcomm. If I close it and reopen it, it takes calls again fine. I thought I

Hello, I've got very annoying behaviour from our asterisk PBX. We have 12 channels T1 e&m wink start for TDM and using iax softphones internally (iaxcomm, but tried firefly-thirdparty and discarded for bad sound quality). Slackware 9.1 w/ kernel 2.4.26+ digium TE110P card. In some cases when call is placed from softphone to TDM, system does not detect call answered on Zap channel and

I'm a new Asterisk user. I've managed to set it up to do everything I want except sound good. Currently, Asterisk sounds considerably worse than my cell phone. I know VOIP can be _better_ than my cell phone, because I've heard Skype do it. (Using 32k iLBC, I believe.) I did an experiment with audio quality: 1) I made a recording which was pretty good. I used an iSight

I updated from CVS yesterday and today and still have the problem. IaxComm cannot transfer the call when it's an outgoing call. ('outgoing' is from the dial plan point of view). details : First I call the IaxComm phone and accept the call. Then I'm not able to transfer it from the IaxComm phone. If the call is an incoming call it works fine. details : First I call a phone

Hi I'm browsing around the internet looking for signs that the IAX client library and app_meetme support video. I stumbled across this post by SteveK on the 27th of Feb 2006. "My company is looking to hire a full-time developer, who will be working about 25-50% of the time on iaxclient; in particular to finally integrate, build, polish and enhance video in iaxclient, add video

Hi All, I've been lurking here for a while now, having only made a couple of posts. I am starting a new hardphone project and was wondering if there is some GPL'ed IAX source that I could start with. I've searched and haven't come up with much beyond iaxClient. While iaxClient does give me a little bit to start with, it looks like it is really intended to be more of a