similar to: Voicemail Playback Issue

Hello, >> > I can talk to other SIP phones and via ISDN to the outside, but I >> >don't hear playbacks or the voicemail messages. >> > Asterisk show in the cli, that the corresponding files are played, >> >but I hear nothing at all. >> > >> > Here is as simple example: >> > >> > [monkeys] >> > exten =>

I'm using asterisk 1.4.11 and Zaptel version 1.4.5.1 with kernel 2.6.22. I have the ztdummy module loaded, which is using zaptel and rtc. When the ztdummy module is loaded, sounds are not heard when using the asterisk "background" command. When the ztdummy module is unloaded, which also removes zaptel and rtc, sounds are heard. I've also tested this under kernel 2.6.21 with the

Hi, I am having problem with my Asterisk installation and find out it has to do with ztdummy. if the ztdummy module is loaded, the asterisk playback() command will not play files. DTMF is still properly received. If the ztdummy module is unloaded, sound playback works again. Here is my version zaptel-1.4.9.2 linux-source-2.6.18 asterisk-1.4.18 Can anyone tell me how to fix it? Or should I

Friends, I'm having severe problems with zaptel timers on Intel Dual Core systems with SMP code enabled. Ztdummy, zaptel connected to Digium TDM or PRI cards - all ends up with large timer probems - zttest going down to 50% accuracy on some systems, even to -1 on ztdummy systems and voice quality is no more. A restart is the only way to get back to a working system. We're only

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've have installed a new Asterisk 1.4.15 system after having previously used a 1.2 CVS head (from 10 Sep 2005). Both systems are pentiums though the newer one is actually a slower processor. On the new system, playback of gsm files is noticeably poorer (voice quality is flakely) on any connected phone (sip or isdn, internal or external).

>On Mon, 2007-11-12 at 15:46 +0100, Stefan Guenther wrote: >> > Hello, >> > >> > I have a strange situation: >> > >> > I can talk to other SIP phones and via ISDN to the outside, but I >don't hear >> > playbacks or the voicemail messages. >> > Asterisk show in the cli, that the corresponding files are played,

My users are reporting that some voicemail messages are being cut off in the middle of being played back. The recordings are OK (they play fine when forwarded to e-mail, and they can often be accessed OK during a later call to voicemail). I found nothing in the archives on this -- ideas anyone? RH9, P4, CVS-HEAD-09/02/04-08:44:34, aggressive echo suppression turned on. Jim Shilliday IT

Hello, Today we setted up a server that needs to use MeetMe but doesn't have any Zap hardware. So we need to use ztdummy (at least, this was our idea). Rarely: zttest is not working at all (100% bad, using zttest -v doesn't give anything, etc.). Of course, after load ztdummy, there isn't any background or anything. It is the same kernel (Debian Etch default kernel, 2.6.18) than

Hi Guys, Gals. Ok, so I have latest CVS sources on a debian box, 2.6.10-1-386 kernel kernel headers isntalled in the right plauce and all that stuff .. but whatever I try .. same results, I only need to get ztdummy working for a conference .. but I always end up stuffed :( heres the compile: robin@debian:~/zaptel$ make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE

Is there a way to make the asterisk voicemail app play back messages in NEWEST FIRST order, instead of OLDEST FIRST? I see the situation repeatedly where someone needs to dip into their voicemail archive to get something from a recently saved voicemail message, and they have to slog through lots of irrelevant stuff to get there. I have seen this question come up previously on this list without

Hey all I have been beating on this all weekend long. Any feed back would be appreciated. We stood up a 11.6 system. We tested everything we could think of. We moved over to it and all seemed to be working good than a customer told us that they were not hearing our vociemail greetings. When we call into the system and it drops to voicemail we just get a beep no greeting played. We checked

Hello, I have a strange situation: I can talk to other SIP phones and via ISDN to the outside, but I don't hear playbacks or the voicemail messages. Asterisk show in the cli, that the corresponding files are played, but I hear nothing at all. Here is as simple example: [monkeys] ??? exten => 99,1,ANSWER() ??? exten => 99,2,PLAYBACK(tt-monkeys) ??? exten => 99,3,HANGUP() The phone

Hi, I would like to change the sequence of messages that was playbacked when I call to the voicemail extension, VoicemailMain. Where can I changed it, can't find the definition for VoicemailMain in extension.conf and voicemail.conf __________________________________________________ Do You Yahoo!? Download the latest ringtones, games, and more! http://sg.mobile.yahoo.com

Hi, >However, I believe that zaptel >= 1.4.6 or zaptel 1.2 >= 1.2.21 should >support hires timers for timing on kernel >= 2.6.22 . > >What version of Zaptel do you use? > I was using version 1.4.5.1 I just downloaded and installed version 1.4.7, configure/make/make install finished without an error, but when is used modprobe ztdummy the system said: FATAL: Error

Greetings! I have a FreeBSD 5.3 running on Intel SR1300 (dual xeon 2.6, scsi) server, with ztdummy.ko driver as timing source for asterisk. The typical output from zttest is: $ zttest Opened pseudo zap interface, measuring accuracy... [..skip..] --- Results after 192 passes --- Best: 99.987793 -- Worst: 98.266602 But when i listening MOH, it's quality is not very good. It is slightly

According to my reading, Asterisk voicemail should have a playback option when I record my busy and unattended messages... it doesn't... Did I do something wrong... i.e. make an improper config selection, compile incorrectly, ...?

On * 1.0.9 User logs into voicemail, dials Option Zero, then Option Three. Records name, accepts the recording. greet.wav is generated in the user's mailbox. It plays back fine. The Directory app still spells out his name! What am I missing?

HiI don't have any digium cards and only want to install ztdummy with all asterisk functions. What I will need with ztdummy and what I can disable?Thanks a lotDmitri************************************ Zaptel Module Selection ************************************* Press 'h' for help.

Hey All, I've been working on trying to get asterisk to play nice under Xen and I've run into a bit of a road block. I'm not using any hardware stuff only ztdummy. First I had issues getting ztdummy to work but that was solved by recompiling the xenU kernel to have CONFIG_CRC_CCITT=y which it was missing. Now ztdummy is seen fine in the virtual machine though when I run

Hello, I have some ugly numbers given by zttest for ztdummy on an AMD64 box running linux-2.6.15 compiled for Athlon64. linux-2.6.15, zaptel/branches/1.2 r900, jiffies ./zttest Opened pseudo zap interface, measuring accuracy... 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586%