similar to: ZAP device reference in Zaptel 1.4 - SIMILAR

So, I've compiled and installed libpri-1.4.11.5, dahdi-linux-complete-2.4.1+2.4.1 and asterisk-1.6.2.17.1, but chan_dahdi is not getting built. If I do a "make menuselect" in asterisk I see it listed with XXX, meaning that dependencies are not met. XXX chan_dahdi Depends on: res_smdi(M), dahdi(E), tonezone(E), pri(E), ss7(E), openr2(E) res_smdi gets built fine, dahdi is

It said 'include zapata-channels.conf', where this line wasn't commented bij the ';'... Could you post me a working example of such a config (or a part of it, for the X100P cards...? Thanks guys! Message: 9 Date: Sat, 19 Mar 2005 18:04:26 -0500 From: "Jeff Glassman" <jrglass@columbus.rr.com> Subject: [Asterisk-Users] newbie question To:

Hi all. chan_zap not compiling, yes yes I know this sounds trivial but here me out... This morning I decided to upgrade to Asterisk 1.4.2 and Zaptel 1.4.1. I successfully installed zaptel 1.4.1 and the card is picked up and correctly configured. ztcfg shows the following: [root@zion root]# ztcfg -vv Zaptel Version: 1.4.1 Echo Canceller: MG2 Configuration ====================== Channel

Hi List; I am facing a problem relaed to menuselect when I am trying to compile zaptel -1.4.2.1, the error as following: [root at localhost zaptel-1.4.2.1]# make linux26 make[1]: Entering directory `/usr/src/asterisk-1.4.4/zaptel-1.4.2.1/menuselect' make[2]: Entering directory `/usr/src/asterisk-1.4.4/zaptel-1.4.2.1/menuselect' make[3]: Entering directory

Hi, We've been using asterisk as our main telephone-communications platform for years now, and we wrote several extra scripts and features for it. Now we 're looking for a solution to limit the number of channels going to an external SIP provider. We recently upgraded our system from asterisk 1.0 to 1.2(.9 now) to be able to use such features, but nothing helped... When we configure a new

Hi all!! I have downloaded the asterisk from svn checkout http://svn.digium.com/svn/asterisk/trunk asterisk-trunk (is the asterisk 1.4 subversion). I also downloaded the patch for cellphone and make it work fine. Then I bought the tdm11b board to have phone connection in my computer. I installed the hardware for zapte and the libpri modules in my Mandriva 2007 and the lights of the pci card

1.6.1 svn 190575: CC="cc" CXX="g++" LD="" AR="" RANLIB="" CFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent" menuselect make[1]: Entering directory `/home/asterisk/rpmbuild/BUILD/asterisk-1.6.1/menuselect' gcc -m64 -march=native -mtune=native -floop-interchange -floop-strip-mine -floop-block -c -o

I decided to try 1.4 today. Zaptel builds, installs and seems to load correctly and Asterisk builds, installs and works but no Zap lines. When I typed "make menuselect" for Asterisk and went poking around I discovered that chan_zap is marked XXX and I can't figure out why that might be. Any suggestions? Ira

Few days back I installed Asterisk 1.4.2 with Zaptel 1.4.0. All SIP accounts were working fine, today I tried to install a fxs Sangoma A200 card and got the following error. [Apr 12 01:15:17] WARNING[31018]: channel.c:3024 ast_request: No channel type registered for 'Zap' [Apr 12 01:15:17] WARNING[31018]: app_dial.c:1090 dial_exec_full: Unable to create channel of type 'Zap'

Hi all, I have now reinstalled my whole system because I had to change a few things wiht my drives. Here is what happens. I have done apt-get build-dep asterisk apt-get install linux-headers-2.6.17-2-686 which works just fine now. Downloaded the latest files from digiums ftp. First I unpacked zaptel. I am doing everything as root. Then I just type make. Here is what happens: checking for gcc...

Hi, I recently decided to change my setup from AsteriskNow to plain-asterisk 1.4, which I wanted to set up and configure myself on a server running Debian Etch 64bit version. Hardware: Asrock motherboard, model 775Dual880-Pro, with a Celeron D running at 2.8GHz, 1GB memory, standard Nvidia GF4MX videocard, and one X100P clone card. Running the AsteriskNow, everything worked fine, except for

First, I didn't realize I hijacked another thread! Please accept my apologies. Now the problem: Asterisk isn't compiling chan_zap. chan_zap also doesn't appear in the list of channels when you "make menuconfig" I have read all the replies and specifically Cosmin's and Tzafrir's emails. zaptel.h is located in /usr/include/zaptel I also tried "./configure

lo there all, i recently upgraded to ubuntu 7 (fiesty fawn) and am having a problem with the install procedure for the zaptel modules. i did the make ; make install and it appeared to go ok, the wctdm module is in the list of lsmod after boot. so is the zaptel module. however when i do an asterisk -vvvv it gives me problem about chan_zap not being able to load. i googled and found some

I have vnc working on my server when I am logged into that server. If I run vncviewer, I have a copy of the Desktop. Hwever, if I SSH into the server, I get an error. Due to my lack of experience, I am not sure what the log file means: http://209.204.172.137/misc/vnc_error.txt Could someone tell me what I am missing? Todd -- Ariste Software 2200 D Street Ext Petaluma, CA 94952 (707)

Hi. I am trying to install "asterisk_srtp". I started by installing zaptel-1.4.9.2 and then I run the configure of asterisk_srtp. In the menuselect of asterisk, the chan_zap in "Channel Drivers" is always unselected(XXX). The only dependency that I don't seem to have is zaptel_vldtmf. Where can I find this zaptel_vldtmf? If I understod correctly, zaptel 1.4 should

I am having trouble with chan_zap.so not loading. When I load it from modules.conf, Asterisk bails out without any error message. When I load it from the console, it just says "Unable to load module chan_zap.so" no matter what verbose level I am using. dmesg says: Zaptel Version: 1.4.4 Zaptel Echo Canceller: MG2 Freshmaker version: 73 Freshmaker passed register test Module 0:

I am having trouble getting Asterisk to compile the zaptel stuff. Here are the specifics: Linux Kernel 2.5.9-42.0.8.EL Asterisk 1.4.0 I compiled libpri, zaptel, asterisk and asterisk-addons (in that order). This is a fresh install of CentOS. Following the CentOS install, I did "yum -y update" until there were no updates left. Here is my src directory: drwxr-xr-x 24 root root

Hi all, I have been looking at the code for both the zaptel driver (wctdm.c/wcfxs.c) and the asterisk channel driver (chan_zap.c) trying to figure out how much of this that has been implemented. So far I can see that the current stable 1.0.9.1 zaptel driver don't have the SETPOLARITY ioctl that would be required to properly signal the Swedish/Dutch CLIP, but the 1.2 beta1 has this

I have an ATA-186 in a SIP configuration (following Shawn Djernes how-to), but I get the following error at the asterisk console when I try to call the phone connected to the ATA: ioctl(ZT_LOADZONE) failed: Inappropriate ioctl for device Failed to register zone 'United States / North America': No data available Everything works if I remove indications.conf from /etc/asterisk -

I am getting this: make gcc -g -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -fPIC -O2 -MD -MT pritest.o -MF .pritest.o.d -MP -c -o pritest.o pritest.c pritest.c:50:28: fatal error: dahdi/tonezone.h: No such file or directory #include <dahdi/tonezone.h> I am using dahdi-linux-complete-2.11.0+2.11.0 I did "find . | grep timezone.h" from the dahdi root and its not