similar to: Using server side phonebook directory with SPA941

Does anyone know how to set the distinctive ring on the Linksys SPA941? I want to be able to dial one extension and have the phone ring with a certain tone and then dial another and have the phone ring with a different tone. I have tried the following ------------------------------------------------------------------- exten => 802,1,SIPAddHeader(call_info=Classic-4) exten =>

Dear Group, I have just purchased two Linksys SPA941 and flashed these to the latest firmware. Everything works well except for the Hold button? Has anyone else experienced the same issue? What was the solution? Kind Regards Shad Mortazavi

Hi all, I'm new to this list, so forgive me if I'm not supposed to ask this: I currently own a Linksys SPA941 SIP phone with 5.1.8 firmware. Is there any way to use TLS with this phone<--->asterisk (v 1.6.0.9)? It is said that is supports TLS/SRTP but I don't see any of these options in the configuration file or the admin (advanced) SIP conf panel. Am I missing something? Thnx

Hi, I'm experiencing the same problem. We have 2 office locations and the Asterisk server is at one of them. At the other location, all SPA941 access the Asterisk server over an Internet link. All phones are set to "nat=yes" at the remote location. So my problem is that the MWI doesn't work at the remote location. The Sipsak messages are sent properly, but it's sent to the

I have an a bunch of SPA941 Linksys phones for users in and out of the office. When the phones are in the office (and on the same network as the asterisk server) the WMI goes on when it should and off when it should. But when the phone is on another network and natted it fails to do so. The light always stays off. Has anybody had a similar problem (and hopefully a resolve)?

Hi I have a big problems on my Asterisk systems : I have one Asterisk Server with static IP (no nat) and 6 Linksys SPA941. All SPA are after a router with NAT: * SPA-1 and SPA-2 are on the same network, we have a pat 5060 => SPA-1 and 5061=> SPA-2 on the internet router * SPA-3, we have a pat 5062 => SPA-3 * SPA-4, we have a pat 5063 =>

Hi all, i know this question is not directly asterisk related - but i have no idea where else to ask. We do have around 50 pieces of LinkSys SPA941 - these phones do have a 2.5mm plug connection - and we do have many many headsets we used with normal PC's before (so 2x3.5mm plug connection). Does anyone here know where i can get an adapter 1x2.5mm -> 2x3.5mm ? Or can anyone here tell me

Hello, Yesterday night we have upgraded our Asterisk from 1.2.32 to 1.4.24.1 with lipbri 1.4.10, dahdi-linux-2.2.0-rc4 and dahdi-tools-2.2.0-rc2. Libpri and dahdi is only for dahdi dummy cause of the meetme function. After the upgrade we had the problem that some Linksys spa941 phone at one location could not dial out. incoming calls to the phones works without any problem, but outbound the

Hi all. The SPA941 and friends have pretty multicoloured LEDs, but there doesn't appear to be any support for SUBSCRIBE/NOTIFY as * as implemented for extension hinting. Has anyone managed to get the phone to support this? Thanks! -- David Zanetti <david.zanetti@catalyst.net.nz> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 -------------- next

Appearently SPA941 is less than a SPA942 without two ports, poe and backlight. There is less features too, it doesn't support BLF. Is it possible to hack 942-software into 941, or is there another workaround? Leif -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091112/0a6cbf82/attachment.htm

Most softphnes (like Idefisk and X-Lite) have a phonebook. Is there a way I can fill those phonebooks with info from the Asterisk server? Amaury Rodr?guez http://liberadospucmm.blogspot.com http://groups.msn.com/telematicaPUCMM2002 Go OpenSource And Be FREE!! --------------------------------- Yahoo! Mail Bring photos to life! New PhotoMail makes sharing a breeze.

Hi, does anyone know about a plugin that allows dialling a contact from the phonebook of evolution or T-bird? -- Alexander Topolanek http://www.topolanek.at

Hello, I wrote a small AJAX phonebook targeted at Grandstream phones although the basic functionality doesn't require a SIP-phone. Asterisk integration (call history, incoming call info, click-to-dial) is not yet implemented, but on my ToDo list. Features * Licenced under the GPL v2 * Uses gettext. So translation should be easy. Includes German and English. * Uses xajax for a

Hello, I updated my AJAX GS/* phonebook. It now actually has Asterisk integration with incoming call-notification, a searchable call history and clickable BLFs. The BLFs can monitor specific extensions (SIP/phone - may work with other channels than SIP if the AMI generates the appropriate events), Asterisk hints or connectivity to external SIP-servers. Features * Clickable BLFs (Dial,

Hi, Am running a freepbx install and created trunks, extensions and groups. Now I'd like to hand out the Asterisk phonebook to the phones (all VVX 310's). Is there an easy way to do this? Best, Stanley

On Monday 26 Jan 2015, Antonio G?mez Soto wrote: > Hi, > > does anyone have a recommendation for a SIP phone, which > allows dialing from a phonebook, and hiding the dialed number > from the end users? Also from the call history of course. > > It seems Mitel can do this, and I have a use case where this is > a requirement. If I have this right, you want to make sure the

Hi list! I'm using Asterisk 1.8.30.0 on a OpenWRT device and it works perfectly. I configured a voicemail and I receive an E-Mail with some information about the call. Again, wonderful! Now my wish: I'd like to have Asterisk to search the caller in a list file and send me the name corresponding to the number in the E-Mail of voicemail. Is it possible? I currently use ${VM_CALLERID} in

Hi, does anyone have a recommendation for a SIP phone, which allows dialing from a phonebook, and hiding the dialed number from the end users? Also from the call history of course. It seems Mitel can do this, and I have a use case where this is a requirement. Thanks, Antonio -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi everyone, I am sure that this question has been asked here some time ago but I do not remember the answer and was unable to find it in the archives... Below is my question: suppose that I have a data.frame x and one of it's columns name is "CPI/RPI" (without quotation marks of course). How can I reference this column? Neither of x$CPI/RPI or x$"CPI/RPI" work. I

I have : raw <- read.table("monthly.text", skip=3, sep="|", col.names=c("junk", "junk2", "wpi", "g.wpi", "wpi.primary", "g.wpi.primary", "wpi.fuel", "g.wpi.fuel", "wpi.manuf", "g.wpi.manuf",