similar to: Zaptel Dummy Driver

Does anyone have any opinions on the music on hold quality over G729? The stock files seem to sound terrible over it, this is enhanced further by calls coming from the PSTN via a Zaptel gateway. I am only using the stock wav files and have not attempted to use much else so far. I've ruled out timing issues on the system generating the MOH itself (ztdummy on the PBX itself, our Zaptel gateway

Has anyone received this message while attempting to do a MAKE INSTALL on ZAPTEL depmod: *** Unresolved symbols in /lib/modules/2.4.26-gentoo-r9/misc/ztdummy.o I am not running DEVFS so that's not the issue. Zaptel drivers/modules all load, but ztdummy won't /lib/modules/2.4.26-gentoo-r9/misc/ztdummy.o: /lib/modules/2.4.26-gentoo-r9/misc/ztdummy.o: unresolved

Hi, Just need to check somthing.. Am I correct in saying that conferencing does not work on a system that does not have a Digium board installed?? Thanks.. -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

Hi, I've managed to build the zaptel modules including ztdummy; ztdummy is installing fine in the modules list and the relevant device structures are present. lsmod | grep ztdummy gives:- ztdummy 5160 0 zaptel 186916 1 ztdummy rtc 12372 1 ztdummy Where I'm stuck is I am now at a loss as to how to configure my /etc/zaptel.conf and

I do not have any zaptel hardware on the Asterisk box, I could not have meetme functioning. I did modify the Makefile in zaptel directory on line 168 by including ztdummy as one of the modules to compile in. The error message from the concole: -- Executing MeetMe("SIP/1002-e9ca", "4700") in new stack == Parsing '/etc/asterisk/meetme.conf': Found

Hello 1. I don't have deep knowledge of either Linux or Asterisk, but I seem to have successfully installed 1.4 with Zaptel (for support for an OpenVox PCI FXO card) on a stock Ubuntu 7.04 Server Edition: ======== dmesg ========== [ 25.990943] Zapata Telephony Interface Registered on major 196 [ 25.990948] Zaptel Version: 1.4.5.1 [ 25.990950] Zaptel Echo Canceller: MG2 [ 27.523605]

Hi All, I have a CentOS server that I am trying to configure Asterisk on 1.4 on. Everything seems to go ok, with regards to compiling Zaptel, Libpri, Asterisk (will be using kernel 2.6 timer and ztdummy) Unfortunately I can't insmod / modprobe ztdummy. [root @xyz src]# modprobe ztdummy FATAL: Module ztdummy not found. FATAL: Error running install command for ztdummy

Hi, In a VoIP only environment, Asterisk has to use ztdummy to have any chance of playing back understandable audio files (without drops, hickups etc). I have been using ztdummy to some degree of success, but I also have a "Wildcard TDM400P REV E/F Board 1" in the Asterisk machine I'm using. I'm not using this card for anything at all, but I'm wondering how to set it

November? It's DD/MM/YYYY in his case, not MM/DD/YYYY. Either way, even two days is more than enough for me. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of john beaman Sent: Tuesday, April 03, 2007 12:43 To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] Re: asterisk-users Digest, Vol 33,

Look at app_valetparking here: http://www.voip-info.org/wiki/index.php?page=Asterisk+addons ________________________________ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kevin Kiely Sent: Monday, July 16, 2007 16:47 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [asterisk-users] MultiParking

Hi there I am currently using Asterisk with Meetme on a 2.4 linux kernel. I am using Ztdummy with usb-uhci driver for timing. It seems to work ok, although I haven't tried it with more than 5 users. However, I am now looking to move into a production environment and some people have said that it is better to have a Zaptel card. I would be installing Asterisk on a 2.6 linux kernel for the

Hi, I've been trying to bring our Asterisk server to the latest version. I've grabbed the latest CVS and upon trying to compile zaptel, I get the following errors: gcc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o gendigits.o gendigits.c gcc -o gendigits gendigits.o -lm ./gendigits gcc -I/usr/src/linux-2.4/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB

HiI don't have any digium cards and only want to install ztdummy with all asterisk functions. What I will need with ztdummy and what I can disable?Thanks a lotDmitri************************************ Zaptel Module Selection ************************************* Press 'h' for help.

Friends, I'm having severe problems with zaptel timers on Intel Dual Core systems with SMP code enabled. Ztdummy, zaptel connected to Digium TDM or PRI cards - all ends up with large timer probems - zttest going down to 50% accuracy on some systems, even to -1 on ztdummy systems and voice quality is no more. A restart is the only way to get back to a working system. We're only

I had a weird (unforeseen) situation today. We have a remote office with an * server and ISDN 10 service. We connect to each other over an IAX trunk with G729. Today, some of Sydney experienced a power surge which knocked out their ISDN services. Without a clock source on their PRI card, my IAX calls to them resulted in one-way audio (they could hear me, but I not them). Is it possible to load

Let me know if I should post this on the asterisk-dev list instead. I am building a Linux-Vserver (http://www.linux-vserver.org) host system that will have several guests running Asterisk. Since the guests can't load kernel modules or do other dangerous stuff, but can access them I built zaptel 1.4 and it is now loaded by the host. The issue I see is there will be no "Zaptel"

Anyone else get this while compiling zaptel? I'm guessing I have to modify my kernel. Neato. :( Does that mean that the zaptel module (I'm really after ztdummy), or this xpp_zap thing won't be usable...? Not that I have zaptel hardware, but it seems Asterisk won't compile itself without zaptel being installed. CC [M] /root/software/zaptel-1.2.6/xpp/xpp_zap.o

I'm trying to compile Zaptel driver with the ztdummy. I have no hardware cards from digium. I tried following steps: http://www.voip-info.org/wiki/view/Asterisk+Zaptel+Installation http://www.voip-info.org/wiki/index.php?page=Asterisk+timer+ztdummy I'm running : Linux version 2.4.27-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Wed Aug 17

I tried to test Asterisk 1.4 on FC6 x86_64. I have it working on FC5 x86_64 very good, but since FC keeps updating, I tried to follow newer kernel versions. I can't pass the zaptel compilation. Everything is OK, but when I finished, and tried to load it, allways got module not found when I run modprobe zaptel, and modprobe ztdummy. I already tried to modify is with the sed 1 option but

/bin/sh: -c: line 0: syntax error near unexpected token `;' /bin/sh: -c: line 0: `if [ -n "" ]; then if [ -f ]; then mv -f .bak ; fi; cat .bak | grep -v "alias char-major-250" | grep -v "post-install torisa /sbin/ztcfg" | grep -v "post-install wcfxsusb /sbin/ztcfg" | grep -v "alias wctdm" | grep -v "post-install wctdm