Displaying 20 results from an estimated 700 matches similar to: "Re: busy/hangup/answer detection in PRI E1 channels (Vidura Senadeera)"
2007 Aug 21
0
Saftware RAID1 or Hardware RAID1 with Asterisk (Vidura Senadeera)
>
>
Dear all,
Thanks for the greate explanation regaing Software/H/W Raid. This details
better but on voip-info.org/wiki pages.
Thanks lot agian.
Regs,
Vidura Senadeera.
======================================
Dear All,
> >
> > I would like to get community's feedback with regard to RAID1 ( Software
> or
> > Hardware) implementations with asterisk.
> >
2007 Mar 09
0
Re: Back to back E1 - asterisk <=> toshiba pbx - Call droping issue [ ref:00D36mPe.50032wycQ:ref ]
Hi All,
Thanks for every one who helped me on this regard. I think i was able to
rictify the problem.
what i did is remove
callprogress=yes
usecallinpres=yes
and restart asterisk. Today i didn't report any drop calls.
Many thanks for Eric. :)
I hope this situation will continue.
Regards,
Vidura.
On 3/8/07, Vidura Senadeera <vidurased@gmail.com> wrote:
>
> Hi,
>
>
2007 Mar 08
0
Fwd: Back to back E1 - asterisk <=> toshiba pbx -Call droping
Before studying your configs, what have you tried so far?
Did you change this?
Also, try changing your second span timing from span=2,2,0,ccs,hdb3,crc4
to span=2,0,0,ccs,hdb3,crc4.
Here is the documentation on voip-info for why it may be the cause of
your issues
http://www.voip-info.org/wiki/view/Zaptel.conf+span+syntax
span definition format:
2007 Mar 07
0
Back to back E1 - asterisk <=> toshiba pbx - Calldroping issue
As these problems are very time sensitive and frustrating, I suggest you
document each change you make and do them one at a time so you can
actually know what the problem was and not introduce new problems in the
process.
Find someone who is on the phone quite a bit and will give you an honest
evaluation of the call dropping situation (unless you yourself are
experiencing this issue too).
2007 Mar 07
1
Re: Back to back E1 - asterisk <=> toshiba pbx - Call droping
Hi steve and All,
I'm attaching cat proc/interrupts out put, lspci -bv out put, zapa.conf,
zaptel.conf for your information
Thanks so much for the feedback and I do accordingly. Hope to get rid off
this isue any how.
To day also reported 10 call drops within 2 hours of period.
fook forward to have your support on this regard.
Thanks & Regards,
Vidura Senadeera,
Network Engineer,
2007 Mar 08
0
"pritimer" parameter in zapata.conf
Hi all,
Please discribe me more about pritimer parameter in zapata.conf
http://lists.digium.com/pipermail/asterisk-commits/2006-July/005824.html
I found above url and have some idea. My PRI E1 timer is t203, what is the
best vale that i have to use for as counter.
default is 10000ms, If i changed it to some big amount, like 60000 what will
happen ????
T203: Layer 2 max time without frames
2007 Jan 19
1
Re: asterisk-users Digest, Vol 30, Issue 79
>
>
> Hi,
>
>
> I checked by changing to from-zaptel, but no luck yet. Pls guide me on
> this.
>
> Regards,
> vudura senadeera
>
>
> ------------------------------
> >
> > Message: 9
> > Date: Fri, 19 Jan 2007 16:47:18 -0000
> > From: "Robert Jenkins" < raj@jrw.co.uk>
> > Subject: RE: [asterisk-users]
2007 Sep 06
1
14. Re: ztcfg error : TE110p error with " CAS signalling on span1 conflicts with HDLC with ... (Carlos Chavez)
Hi Carlos/All,
Thanks for your reply. I can remove dchan=16 from zaptel.conf
But according to the documentation of Digium and sangoma they mentioning to
use dchan=16.
Are there any specific reason you have experiance regarding this and I am
confusing that what this is included to the documentations.
Regards,
Vidura.
On Wed, 2007-09-05 at 20:26 +0530, Vidura Senadeera wrote:
> Dear All,
2009 Jun 29
1
ISP< ->Asterisk <-> ATA <->DIALUP
Hellow,
* I have a problem with dial up signalling. currently I have configured
asterisk server and E1 card to ISP. then other side I am having ATA to PC
for connecting internet through DialUP connection. is it possible and please
send me the procedure how I can do it ?? *
ISP< <-> Asterisk <-> ATA <-> DIALUP
--
Thanks & Regards,
Vidura Senadeera,
Sri Lanka.
2007 Aug 28
0
Saftware RAID1 or Hardware RAID1 with Asterisk (Andrew Joakimsen)
Dear Andrew,
Thanks for your kind responce.
Regards,
vidura.
=============================
> Motherboard with SATA RAID1 support
That's a mulit-port SATA controller with RAID in the driver (software).
> 256 MB RAM
Use a little more RAM.
> digium PRI/E1 card
Is there any reason you aren't using Sangoma cards?
> 1. If I use Software RAID, what would be the impact to my
2010 Jul 16
1
IAX endpoints not Registering after upgrage from Asterisk ver 1.4.26.1
Dear All,
I am experiance a issue with my IAX clients. I have upgradeed Asterisk to
1.4.28
After then IAX clients are not working and It's not registering even.
Please help.
Asterisk previous version - 1.4.26.1 ( for this worked fine)
FreePBX version - freepbx-2.5.2
--
Thanks & Regards,
Vidura Senadeera,
Sri Lanka.
msn/yahoo/skype Ids - vidurased
-------------- next part
2006 Apr 26
1
Intergrate Asterisk IP PBX with Legacy PBX, continuing existing funtionality of legacy pbx
Hi All,
I would like to explain the layout that i am trying to achive. I am so
helpless on this regard.
So here is the story ........
" This is with regard to the setup which you can find at the
"Asterisk The Future of Telephony" , chapter 11, page # 196-197, I am
attaching the picture for your information.
Now I am taking a challenging step to of integrate IP PBX with our
2007 Sep 05
4
ztcfg error : TE110p error with " CAS signalling on span 1 conflicts with HDLC with ...
Dear All,
I'm integrating avaya commuication manager difinity ver 1.0 with asterisk
using B2B E1. following are the details of my H/W, zaptel configs and
software installed.
Digium TE110p
asterisk 1.2.19
cent OS 4.4
zaptel 1.2.18
libpri 1.2.4
etc/zaptel.conf
span=1,0,0,cas,hdb3
bchan=1-15,17-31
dchan=16
when i ztcfg -vvv im having this error message and the E1 is not getting up.
"cas
2007 Jan 19
1
Integrating asterisk with Toshiba Astrata DK380
Deat all,
I am in middle of integrate Asterisk with Toshiba astrata legacy pbx.
Following is my setup
*Asterisk <-> Digium TE110P <-> E1 card in toshiba pbx <-> Toshiba PBX*
A =============================================> B
C <============================================ D
Asterisk PBX and strata PBX connected using back to back E1 cross cable.
Physicall connectivity
2007 Aug 21
6
Saftware RAID1 or Hardware RAID1 with Asterisk
Dear All,
I would like to get community's feedback with regard to RAID1 ( Software or
Hardware) implementations with asterisk.
This is my setup
Motherboard with SATA RAID1 support
CENT OS 4.4
Asterisk 1.2.19
Libpri/zaptel latest release
2.8 Ghz Intel processor
2 80 GB SATA Hard disks
256 MB RAM
digium PRI/E1 card
Following are the concerns I am having
I'm planing to put this asterisk
2004 Nov 25
0
Solution - ISDN-PRI hangup cause
Well, it works for me .. YMMV.
Yesterday I had a problem where I had a meridian talking to * via a PRI
card, and from * to the pstn via an isdn30 link. The problem was that if the
number was bad, or engaged then the meridian line simply dropped, not giving
the operator any indication of what occurred.
With much help from this list, I managed to construct a dialplan which
solved our issues.
2008 Jul 02
0
asterisk-users Digest, Vol 48, Issue 4
Hi,
Check sip.conf settings. disable TCP and TLS, or if there is any securify
related parameters. Use UDP and test.
Send us your feedback.
Regards,
Vidura B. Senadeera.
------------------------------
>
> Message: 4
> Date: Tue, 1 Jul 2008 13:50:16 -0400
> From: David Siegel <David.Siegel at twosigma.com>
> Subject: [asterisk-users] Broadvoice and Asterisk 1.6.0-beta9
>
2007 Aug 28
0
(no subject)
> Motherboard with SATA RAID1 support
That's a mulit-port SATA controller with RAID in the driver (software).
> 256 MB RAM
Use a little more RAM.
> digium PRI/E1 card
Is there any reason you aren't using Sangoma cards?
> 1. If I use Software RAID, what would be the impact to my deployment? (
> problems that I have to face with regard to the call flow )
None.
> 2.
2007 Oct 15
0
MFC/R2 protocol varient - sri lanka/Nortel DMS 100
Hi All,
We successfully installed MFC/R2, chan_unicall.so with asterisk ver 1.2.6.
asterisk is loading properly and we can see US show channels working fine.
We are using digium Te120P card.
Now we are trying to setup E1 link with Nortel DMS 100, which is resides at
one of telco provider in Sri Lanka.
But we don't know what is the exact protocol varient to use. Is anyone help
us out on this
2007 Nov 28
0
Re :Recommendations for 100 Wifi SIP phone
Hi,
Try http://gigaset.siemens.com/shc/1,1935,hq_en_0_11729_rArNrNrNrN,00.html
you will have good selections there.
Regards,
Vidura Senadeera
================================
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Message-ID: <200711252201.lAPM1NUP005677 at mail871.megamailservers.com>
Content-Type: