similar to: MP3Player

Hi all, Here another guy working with ztdummy and having problems with music. MP3Player does not work for me both from a telephone entering through a passive ISDN-adapter as well as a SIP-client in the LAN. Ztdummy works with conferences. Here are my messages. I have seen several discussion threads in the mail-archive regarding this subject, but could not find an answer. Is this something I

Hi all, I could use MP3Player to play local sound (e.g: /usr/sound/abc.mp3) but I could not use it to run a remote stream, if I use mpg123 in command line, I can hear the audio ( /usr/bin/mpg123 http://...), but the same remote mp3 file could not be replay with asterisk. I would appreciate with any suggestion. Phuong Here are the log message: -- Starting simple switch on 'Zap/3-1'

Hi there, I am using bri-stuff.0.1.0-RC2k and it seems that things didn't become better. I have got lots of dropouts on the IAX2 link (no matter if jitter buffers are enabled). Further the MP3Player application does not playback streams like http://somestreamserver/somestream. It stops saying: -- Executing MP3Player("SIP/27870-ba4f",

Hi all! I downloaded right mpg123, chabged path to mpg123 binary in app_mp3.c, rebuilt app_mp3.so, and got MusicOnHold to work. But MP3Player refuses to do properly: -- Accepting AUTHENTICATED call from x.x.x.x, requested format = 1024, actual format = 1024 -- Executing Answer("IAX2/maxhome@maxhome/3", "") in new stack -- Executing

I am running CVS HEAD (on a Linux-PPC machine.) My current dialplan generates an error at the console in asterisk when I attempt to issue the MP3Player command -- I can't figure out why it's not playing the actual audio file? The rest of the dialplan works great. Here's what I see in the console: -- Executing MP3Player("IAX2/income-in-01@IP",

Hi, I'm running the latest Asterisk (built last Saturday) and can't get mp3's to playback on my handsets (this includes music on hold). I setup a couple of extensions, 901 and 902 to playback an mp3 I loaded on, and the sample moh that is included with Asterisk. When I attempt to call either extension I don't hear any sound, and the following displays on the console:

Dear All, I can not transfer call in progress. What's wrong with my macro? I think tT flags is enough right? [macro-stdexten] exten => s,1,Set(temp=${DB(CFU/${ARG1})}) ; Get CFU key exten => s,2,Set(DNDStatus=${DB(DND/${ARG1})}) ; Get DND key exten => s,3,GotoIf($["${temp}" = ""]?5) ; If not existing, goto priority 5 exten =>

Hi All, I'm using Asterisk 1.2.14 under openSuSE 10.2 with kernel 2.6.18. I have Wildcard TDM400P card and D-Link DPH-120S and DPH-140S SIP phones. I would like to be able to pickup ringing extention from any SIP phone using Pickup() application. from my dial plan: [incoming] exten => s,1,Dial(SIP/somebody1|60|tTrR) [internal] include => outbound-local include => parkedcalls

Hi All, I've installed Enhanced PickupChan on asterisk 1.2.14 using howto from http://www.thorsten-knabe.de/linux/asterisk/pickup.jsp . from extensions.conf: exten => 0,1,Dial(SIP/eosoiris|20|tTrR) exten => 200,1,Dial(SIP/dzalewski|20|tTrR) exten => _7.,1,Pickup2(${EXTEN:1}) When I try to pickup ringing SIP channel from other IP headset I go disconnected. here is debug from

[I'm reposting this to the asterisk-users list, since it seems to be a bit more active.] Hello, I started messing with Asterisk few days ago, so my overall knoledge about it is still fairy superficial. I think I found an issue with MP3Player; it can be reproducted with this extension: exten => 6001,1,Answer exten => 6001,2,Background(blahblah) exten => 6001,3,Ringing exten =>

There is a patch to mplayer that allows it to suppress stdout messages and instead output pcm data to stdout. I managed to get it working with app_mp3.c and seems like it is working fine. All that was needed was a change in the execl line and a slight increase in timeout value. I have only done limited testing. If mplayer is able to replace mpg123 without issues, this opens up a whole lot of

Hi I have kind of an odd problem. When dialing in from an outside line via a TE410P card it seems like MusicOnHold and MP3Player doesn't work properly (for me anyway). The remote end which is calling * doesn't hear the music but just keeps ringing. But if I insert a Playback("file_which_dont_exist") just before the Moh or MP3Player I can hear the music. Actually I observed the

My experience told me that mp3player (command) was rather unreliable with shoutcast. I heard nothing. If I use madplay in musiconhold.conf, everything is ok. But, using mp3player in extensions.conf is better than using MoH. Pls kindly advise if we could use madplay in extensions.conf. Could we put it into system command? Best Rgds, ????????????????????????????????????????

Hi, I've successfully installed Asterisk and placed test calls using the MP3Player application. However I notice that my call quality varies drastically depending on which MP3 I use. Since I'm not changing any settings I'm assuming that the encoding of the file makes a difference. I've tried with both the g729 and alaw codec and they both give the same replicable results.

I installed Asterisk 1.0.9 in a Freebsd 5.4 ( with no zaptel card); I have 2 zoom x5v and works great ( in extensions 123 and 321 ) but I was trying to test cmd Playback, MusicOnHold, MP3Player but when I call to extension 100 I don't hear the sound ( mp3 or gsm that I put) , I only hear noise If I leave a message in a mailbox the same, all the record is noise --------- extensionns.conf

Here's a question maybe someone can help me with: My extension looks like this: exten => 1006,1,MP3Player,http://audio-mp3.ibiblio.org:8000/wcpe.mp3 When I try this extension, the following output appears in the CLI: Nov 13 12:47:51 NOTICE[8422]: app_mp3.c:111 timed_read: Poll timed out/errored out with 0 I should mention that mpg123 is installed, however the server we are using for this

If there is anyone on this list running Asterisk 1.0.7 beta 3 under 10.4.1 can you please tell me if you are able to execute the Asterisk cmd MP3Player(filename) I can't figure out how to get a working MP3 player to trigger the audiofile when I replace filename with an actual path to a file. Basically, when I put an OSX compiled version of MPG123 in /usr/bin Asterisk will not startup.

Getting the proper version of MPG123 (v0.59r) setup under OS X was unusually complicated for me. Sorry for pestering the list with the MP3Player() issues I kept posting about. Your inbox will be happy to know that I finally got the correct file at: http://www.macupdate.com/info.php/id/6275 What I did was: (1) First, download the installer at:

Skipped content of type multipart/related-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 2892 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20030403/46e84bf5/smime.bin

This 2 line code is doing what I wanted. exten => 200,1,voicemail(200) exten => 200,2,Hangup What I've been told is that they want the 20 year old phone system to light up the message bulb. (yea, a filament bulb, not an LED) To do this you pick up on the line that goes into Asterisk and do a: exten => 200,1,SendDTMF(200w#86) But I don't know the path to take to get that