similar to: Fwd: Back to back E1 - asterisk <=> toshiba pbx -Call droping

Hi steve and All, I'm attaching cat proc/interrupts out put, lspci -bv out put, zapa.conf, zaptel.conf for your information Thanks so much for the feedback and I do accordingly. Hope to get rid off this isue any how. To day also reported 10 call drops within 2 hours of period. fook forward to have your support on this regard. Thanks & Regards, Vidura Senadeera, Network Engineer,

As these problems are very time sensitive and frustrating, I suggest you document each change you make and do them one at a time so you can actually know what the problem was and not introduce new problems in the process. Find someone who is on the phone quite a bit and will give you an honest evaluation of the call dropping situation (unless you yourself are experiencing this issue too).

Hi All, Thanks for every one who helped me on this regard. I think i was able to rictify the problem. what i did is remove callprogress=yes usecallinpres=yes and restart asterisk. Today i didn't report any drop calls. Many thanks for Eric. :) I hope this situation will continue. Regards, Vidura. On 3/8/07, Vidura Senadeera <vidurased@gmail.com> wrote: > > Hi, > >

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: zapata.conf Type: application/octet-stream Size: 2410 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20070307/871ac980/zapata.obj

> Hi Gareth Blades & Doug, > > Thanks so much for for the feedback. I have searched on lot of documents > but couldn't able to find clear answer regarding it. > > I hope you guys replies are very much help all in aterisk community. > > > Thanks & Regards, > > Vidura Senadeera, > > Network Engineer, > > Debug Solutions > > Sri Lanka .

Deat all, I am in middle of integrate Asterisk with Toshiba astrata legacy pbx. Following is my setup *Asterisk <-> Digium TE110P <-> E1 card in toshiba pbx <-> Toshiba PBX* A =============================================> B C <============================================ D Asterisk PBX and strata PBX connected using back to back E1 cross cable. Physicall connectivity

> > > Hi, > > > I checked by changing to from-zaptel, but no luck yet. Pls guide me on > this. > > Regards, > vudura senadeera > > > ------------------------------ > > > > Message: 9 > > Date: Fri, 19 Jan 2007 16:47:18 -0000 > > From: "Robert Jenkins" < raj@jrw.co.uk> > > Subject: RE: [asterisk-users]

Hi Carlos/All, Thanks for your reply. I can remove dchan=16 from zaptel.conf But according to the documentation of Digium and sangoma they mentioning to use dchan=16. Are there any specific reason you have experiance regarding this and I am confusing that what this is included to the documentations. Regards, Vidura. On Wed, 2007-09-05 at 20:26 +0530, Vidura Senadeera wrote: > Dear All,

Hellow, * I have a problem with dial up signalling. currently I have configured asterisk server and E1 card to ISP. then other side I am having ATA to PC for connecting internet through DialUP connection. is it possible and please send me the procedure how I can do it ?? * ISP< <-> Asterisk <-> ATA <-> DIALUP -- Thanks & Regards, Vidura Senadeera, Sri Lanka.

> > Dear all, Thanks for the greate explanation regaing Software/H/W Raid. This details better but on voip-info.org/wiki pages. Thanks lot agian. Regs, Vidura Senadeera. ====================================== Dear All, > > > > I would like to get community's feedback with regard to RAID1 ( Software > or > > Hardware) implementations with asterisk. > >

Dear Andrew, Thanks for your kind responce. Regards, vidura. ============================= > Motherboard with SATA RAID1 support That's a mulit-port SATA controller with RAID in the driver (software). > 256 MB RAM Use a little more RAM. > digium PRI/E1 card Is there any reason you aren't using Sangoma cards? > 1. If I use Software RAID, what would be the impact to my

Dear All, I am experiance a issue with my IAX clients. I have upgradeed Asterisk to 1.4.28 After then IAX clients are not working and It's not registering even. Please help. Asterisk previous version - 1.4.26.1 ( for this worked fine) FreePBX version - freepbx-2.5.2 -- Thanks & Regards, Vidura Senadeera, Sri Lanka. msn/yahoo/skype Ids - vidurased -------------- next part

Hi All, I would like to explain the layout that i am trying to achive. I am so helpless on this regard. So here is the story ........ " This is with regard to the setup which you can find at the "Asterisk The Future of Telephony" , chapter 11, page # 196-197, I am attaching the picture for your information. Now I am taking a challenging step to of integrate IP PBX with our

Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 bchan=1-15,17-31 dchan=16 when i ztcfg -vvv im having this error message and the E1 is not getting up. "cas

Dear All, I would like to get community's feedback with regard to RAID1 ( Software or Hardware) implementations with asterisk. This is my setup Motherboard with SATA RAID1 support CENT OS 4.4 Asterisk 1.2.19 Libpri/zaptel latest release 2.8 Ghz Intel processor 2 80 GB SATA Hard disks 256 MB RAM digium PRI/E1 card Following are the concerns I am having I'm planing to put this asterisk

Hi, Check sip.conf settings. disable TCP and TLS, or if there is any securify related parameters. Use UDP and test. Send us your feedback. Regards, Vidura B. Senadeera. ------------------------------ > > Message: 4 > Date: Tue, 1 Jul 2008 13:50:16 -0400 > From: David Siegel <David.Siegel at twosigma.com> > Subject: [asterisk-users] Broadvoice and Asterisk 1.6.0-beta9 >

> Motherboard with SATA RAID1 support That's a mulit-port SATA controller with RAID in the driver (software). > 256 MB RAM Use a little more RAM. > digium PRI/E1 card Is there any reason you aren't using Sangoma cards? > 1. If I use Software RAID, what would be the impact to my deployment? ( > problems that I have to face with regard to the call flow ) None. > 2.

Hi All, We successfully installed MFC/R2, chan_unicall.so with asterisk ver 1.2.6. asterisk is loading properly and we can see US show channels working fine. We are using digium Te120P card. Now we are trying to setup E1 link with Nortel DMS 100, which is resides at one of telco provider in Sri Lanka. But we don't know what is the exact protocol varient to use. Is anyone help us out on this

Hi, Try http://gigaset.siemens.com/shc/1,1935,hq_en_0_11729_rArNrNrNrN,00.html you will have good selections there. Regards, Vidura Senadeera ================================ To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com> Message-ID: <200711252201.lAPM1NUP005677 at mail871.megamailservers.com> Content-Type:

Hi, Use orecx, voip call recording and monitoring. www.orecx.com Thanks & Regards, Vidura Senadeera, Sri Lanka. Tel - +94114520001 Mobile - +94777766596 yahoo/skype Ids - vidurased > ------------------------------ > > Message: 17 > Date: Fri, 30 Nov 2007 08:58:41 +0530 > From: ram <talk2ram at gmail.com> > Subject: Re: [asterisk-users] Newb Question > To: