Displaying 20 results from an estimated 1000 matches similar to: "hanging an asterisk box off of a PBX analog extension"
2007 Jan 12
4
FW: Get dialed numbers in AGI
On 1/11/07, Mike D'Ambrogia <miked@jamagination.com> wrote:
>
> Ralph
>
> Kind of new to asterisk, and really new to AGI but it looks like you were
> trying to have the AGI script tell asterisk to read and lay the results into
> my_var and then regain control in the AGI script, is that correct?
>
> If so I don't think that will work since the dialplan
2004 May 19
1
xp100 not hanging up after call disconnect
Hi,
I have the setup of my xp100 plugging into my dlink gateway that i use
with a voip provider. I notice that when someone calls my pstn # that
goes to the asterisk box it works but when they hang up asterisk does
not recognize the hangup. What needs to be done to make it work with a
dlink gateway. when i plug the xp100 into my land line jack everything
works fine and the xp100 reconizes
2006 Mar 16
1
UK Caller ID - Asterisk 1.2.5 - TDM4 Card
Has any one found any issues (bug?) with ver 1.2.5 as CallerID generated on
an outgoing FXS port (to the handset) fails when UK tones are used, with a
message 'Didn't finish Caller-ID spill. Cancelling.'
Any tips on getting this running ? Looked at Mantis, but only known bugs
seem to relate to XP100 cards - not the TDM card.
Thanks
2005 Jan 14
1
Asterisk and Voice Pulse Open Access
Has any messed with getting Asterisk to work using the Voice Pulse Open
Access plan? I currently have 2 numbers with Voice Pulse, 1 is a number
that is assigned to their hardware device (Sipura SPA-2000), the other is a
Open Access number that uses SIP from any device (you must authenticate with
them). I want to be able to use the Open Access number on my Asterisk
server here at home with no FXO
2004 Nov 29
1
Packet8 integration into Asterisk?
Hi John,
I've been using Packet8 via a physical ATA and XP100 card for some time.
As far as I know it is not possible to connect to the Packet8 service
without the ATA.
If this is not the case I would be very interested to hear this.
In addition since moving to the USA I now only have a single packet8
line into my asterisk box (I used to have this and a 2nd regular pstn
line)
I used to be
2005 Sep 11
1
Integrating with existing analog PBX
Hi.
Am new to this concept but have been requested to add VOIP capability to a
small office phone system.
They currently have 4 standard analog lines running into a PBX feeding 16
phones, with all the usual features,
call transfer
call hold
internal calls
etc.
would the following seem reasonable ?
asterisk server:- ( what specs )
cat5 > broadband (VOIP)
4 FXO's for incoming PSTN
2003 Jun 24
0
Which type of lines to get from the Analog PBX??
<P>hi,</P>
<P>I have the following scenario,</P>
<P>an Asterisk server<BR>anolog pbx</P>
<P>I hav a channel bank, it accepts 30 analog lines coming from the analog pbx,<BR>the other end of the channel bank is the asterisk server with E100P card.<BR>I am confused as to which type of lines to get from the analog pbx.</P>
<P>I
2004 Jun 10
0
Asterisk as a VoIP Gateway to an Analog PBX
Hello all,
I am a relative asterisk noob so please bear with me if my questions are obvious. What I'm trying to do is get our analog PBX (A Merlin Legend) connected to VoIP. From all my googling and reading voip-info.org (and this list) it seems very possible. I just wanted to describe my setup and see if I'm going in the right direction.
What I'd like to do is set up an asterisk box
2005 Feb 12
0
Possible to use CAPI PBX as interface to analog phone?
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello everyone,
I've got an old AVM all-in-one ISDN box lying around. Currently,
it's attached to my server via USB and CAPI4Linux and additionally
has an analog DECT phone attached to one of its TAE ports.
As I'm planning to switch to VOIP via cable internet, I'm now
thinking about the following setup:
[Internet] -> Cablemodem
2007 Nov 15
1
asterisk integration with panasonic analog pbx
Hi all,
I have an existing panasonic analog pbx in use and a asterisk server with digium tdm400p(2 fxs and 2 fxo).
channel 1 -> fxs -> telephone
channel 2 -> fxs -> telephone
channel 3 -> fxo -> extension 15 at panasonic pbx
channel 4 -> fxo -> phone line from telco
We call in to fxo (channel 4) and enter the ivr which prompt us to enter the extension number. After
2003 May 14
5
Asterisk - Connction to analog PBX?
Has anyone tried to connect parallely to an analog PBX system?
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
2005 Sep 13
1
asterisk hangup detection on a pbx analog port]
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<br>
<meta content="text/html;charset=ISO-8859-1"
2004 Aug 08
2
pbx answers after answering from analog phone
I am setting up my * for at home office and still have analog phones
attached and answer from those analog phones and not necessarily through the
pbx. I found that with the X100P cards, they see the 2nd ring and will be
ready to answer the line. I used a Wait to pause and allow another 2 rings
before * answers. But found that if we answer the line after the 2nd ring
and before the 4th, * still
2008 Nov 29
0
received wrong state events for originate command
Hey all,
Something is wrong when i use originate command to call my phone
(Asterisk1.4.22 + xp100 card).
Actually, i have two problems.
The first one: If i fire a outgoing call using originate command directly,
after my pc startup, i will receive below error message:
[Nov 26 07:58:53] NOTICE[6559]: channel.c:2898 __ast_request_and_dial:
Unable to request channel Zap/1/13xxxxxxxxx
but i can
2005 Jun 16
0
Subject: asterisk gsm gateway hardware
> Hello,
>
> I would like to implement a home GSM gateway using asterisk. What
> would you recommend me as a low-cost hardware for creating a gsm
> channel? I found 2n gsm gateway, that supports sip and chan_blue for
> bluetooth connections. Any recommendations?
>
> Basically, I want to end calls to some GSM number in my sip
> telephone and for some prefixes dial
2005 Aug 07
0
Calls from Asterisk to CallManager 3.0 how?
Hello all
We succesfully added a H323 Gateway to our CallManager 3.0 that resides in Mexico and were/are able to make calls from CallManager SCCP phones to the Asterisk Server phones in the U.S.; however, we have not been able to call from Asterisk server in U.S. to CallManager phones in Mexico
Here is what we tried:
1. Adding a Gatekeeper into CallManager and then have Asterisk (and also
2004 May 12
2
problems with analog interface to PBX
Folks,
For the last few days I've been trying to experiment with a Panasonic PBX and an X100P but have run into quite a few problems which I am not sure if they can be solved with this type of card (how about TDM01B?)
1) I wanted to use *'s IVR capabilities, so I routed the calls to the extension where the x100p was connected to.
Asterisk should answer the call, playback a message,
2003 Sep 01
2
Unified Messaging Support ?
Hello,
One quick question. Does anyone has experience implementing
unified messaging (UM) using Asterisk. Does Asterisk has support
for UM ?
Thanks,
Tarun
___________________________________________________
Medicine meets Marketing; Dr. Swati Weds Jayaram.
Rediff Matchmaker strikes another interesting match !!
Visit http://matchmaker.rediff.com?2
2007 Aug 05
2
New CentOS DNS Server woes
Hi folks,
I've put my new DNS server in place, told the primary that this IP would
be pulling zones and restarted BIND on the primary.
I configured my named.conf file to pull zones from the primary, started
BIND on the new box. Here's where I get confused
++++++++++++++++++++++++
[root at sunspot etc]# /etc/init.d/named status
number of zones: 169
debug level: 0
xfers running: 0
xfers
2016 Apr 19
1
samba 4 avahi invalid response packet from windows 10 clients breaks dns
Hello to all,
I am using samba 4.3.4 on centos 6.5
With bind for dns registration:
version: 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6
CPUs found: 24
worker threads: 24
number of zones: 27
debug level: 0
xfers running: 0
xfers deferred: 0
soa queries in progress: 0
query logging is OFF
recursive clients: 0/0/1000
tcp clients: 0/100
server is up and running
I am watching avahi flooding my