asterisk users - Jan 2005 - Asterisk and Voice Pulse Open Access

Has any messed with getting Asterisk to work using the Voice Pulse Open
Access plan?  I currently have 2 numbers with Voice Pulse, 1 is a number
that is assigned to their hardware device (Sipura SPA-2000), the other is a
Open Access number that uses SIP from any device (you must authenticate with
them).  I want to be able to use the Open Access number on my Asterisk
server here at home with no FXO cards.  I have having a hard time getting
this to work; I have only been using Asterisk for about a week now.  I have
managed to get Asterisk working with a plain phone line going into an XP100.
This list is an awesome tool, any help would be appreciated!!!

 

Chris

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050114/bbc8ba21/attachment.htm

Chris,

I do not have VoicePulse Open Access, but I do have an incoming number through
VoicePulse Connect.  You might want to give the following a try unless you get
a repsonse back from someone who uses Open Access specifically.  (I found the
access1.voicepulse.com address from another posting.)

Edit sip.conf and extensions.conf as follows, editing the 2165551212 to
match your assigned phone number from VoicePulse, as well as filling in your
userid and password.

To have the extension go to another context than default, you must specify it
as the context in the general section in sip.conf - I was unable to get the
normal peer matching to work for voicepulse, at the moment I suspect its due
to inconsistent rev mappings for their ip's.  If you do not have an
extension
that matches your number, it will defer to 's'.

sip.conf

; in your [general] section add:
register => userid:password@access1.voicepulse.com

extensions.conf

; add an extension matching your phone number to your default context (or the
; context specified in sip.conf)
exten => 2165551212,1,Answer
exten => 2165551212,2,Wait,1
exten => 2165551212,3,Playback(vm-goodbye)
exten => 2165551212,4,Hangup

Hope this works for you - it does for me with VoicePulse Connect.

Randy

On Fri, Jan 14, 2005 at 10:19:17PM -0500, Chris Wallace
wrote:
> 
>    Has  any  messed  with  getting Asterisk to work using the Voice Pulse
>    Open Access plan?  I currently have 2 numbers with Voice Pulse, 1 is a
>    number  that  is  assigned to their hardware device (Sipura SPA-2000),
>    the  other  is a Open Access number that uses SIP from any device (you
>    must  authenticate  with  them).   I  want  to be able to use the Open
>    Access number on my Asterisk server here at home with no FXO cards.  I
>    have  having  a hard time getting this to work; I have only been using
>    Asterisk for about a week now.  I have managed to get Asterisk working
>    with  a plain phone line going into an XP100.  This list is an awesome
>    tool, any help would be appreciated!!!
> 
> 
>    Chris
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users