similar to: To use asterisk or proprietary hardware, that is the questio

Hi there, Here is my dilema. I have a new small business customer that wants me to put in a VoIP phone system for them. Based on their requirements, I have determined that it needs to be a "set it and forget it" type of thing like a lot of small business proprietary systems. At the same time they would like to be able to do minor dial plan changes themselves so I have determine

Hi there, I'm looking for a compact fanless solution preferrably wall mountable and not too exotic. It needs to be commercial grade. I don't really consider most of the Via ITX solutions I have seen commercial grade but perhaps someone can convince me otherwise. This solution is about the best I have found. Maybe a bit on the exotic side but I like the fact it is wall mountable AND

Hello Before I order a Travla C156 case (http://206.14.132.88/products/Travla/c156/C156.html), a Via mini-ITX motherboard (either the fanless ME6000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=4 or the fan-equipped M10000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=163 ) , and a PCI FXO card from Digium or OpenVox... has someone already

I updated my home server with the 6.4 CR packages, and I've experienced 3 or 4 hard lockups since. The server is a fanless VIA C7 "CentaurHauls" system with a 1GHz CPU underclocked to 800MHz and 1GB of RAM. It has a dual-port Intel 82546GB NIC in its single PCI slot. (It also has an on-board Realtek RTL-8110SC/8169SC NIC that is plugged in, but doesn't currently have an IP

Hi, I have to install an Asterisk PBX for a customer and he wants something like logic supply's fanless computers. Can anybody advise about how good will they work, are they compatible with the Asterisk system? I'll also be installing a sangoma 4 port FXO card in it. -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello I am using a VIA Epia ME6000 with a 600MHz Eden Fanless CPU. Is this likely to be enough power for a 8 extension system with 6 external pstn lines? How important is cpu? Is there some measure, eg xMHz CPU per extension or something benchmark? I have installed 512MB memory - again any benchmark for asterisk memory usage? Angus

> -----Original Message----- > From: Ronald Wiplinger [mailto:ronald@elmit.com] > Sometimes it is not the "if" you make a search, often is for > new comers > "what" to aks for. > If you do not know the specific term, than you need to ask somewhere, > and I think the list is good for that. Sure. So say, "I tried a Googling for X, but I didn't

Hi everyone, this article (http://blog.dovecot.org/2012/02/dovecot-clustering-with-dsync-based.html) describes the situation for director/NFS-based clusters and SSH-based clusters. Right now I'm running the first setup with one proxy/director and two backends (all 2.2.x) mounting an NFS-share but I'd like to get rid of NFS (it's slow) and, if one backend is down, the proxy still

Hello Out of curiosity, has someone managed to run Asterisk on a Beagleboard for home-use? www.beagleboard.org As an alternative to a PC, it can be powered from a USB hub, so that would make for a compact, fanless Asterisk server. Thank you.

Hey, A bit out of topic but I am looking for a micro server/pc if anyone knows a descent one... I found many nice NAS but I would like to have full access to the OS (install CentOS, etc). Dream one would be - Very quiet (fanless) since it will sit in my bedroom. - Headless - Small. - 2/3 HDs (2.5" are ok) for RAID1 (hardware RAID would be nice, and with BBC even more).- 1 or 2 GB NICs -

> -----Original Message----- > From: Paul Fielding [mailto:paul@fielding.ca] > Frankly, I agree. If you don't like the question, feel it's > lame or dumb, > or don't like that someone hasn't done their research, then > delete the message. Well, sometimes that works. But I've been on a lot of lists where newbies who thought they were being ignored

We are currently considering the Linksys POE switch for a small Asterisk office deployment. There will be no separate wiring closet to put it in. Can anybody tell me if this switch has a loud fan? Users would not be able to tolerate a loud noise close by. Otherwise we will go with a fanless desktop switch. Thanks, -- Andres

Hi We have a number offices accommodating 4-6 people each hence it is very important for PBX to be fanless and silent. We have been looking at using IDE flash disks also called DOM. The performance tests we have done so far satisfy our requirements, however we are concerned with DOM durability. We have installed debian and vanilla asterisk on 1GB DOM. All seems to work fine at the moment however

This is needed for using Nouveaus PMU image after performing secboot. This will be helpfull for Maxwell2 reclocking on boards without externally controlled fans like on most laptops or fanless boards. Signed-off-by: Karol Herbst <karolherbst at gmail.com> --- drm/nouveau/nvkm/subdev/secboot/acr_r352.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git

I've got a Wildcard T100P along with a Zhone Zplex 10 24S/O which has been working fine for me now for a while. These have been pulled out of a working Asterisk installation (as they were no longer required) to use at home only to find that the fan noise is too loud. As such I'm looking to sell off this hardware and replace it with some combination of fanless hardware that will allow me to

Hello Walter, On Sat, 13 May 2017 13:08:17 +0200 "Walter H." <Walter.H at mathemainzel.info> wrote: > On 13.05.2017 00:29, Robert Moskowitz wrote: > > I have been working, for the past few years, with armv7 SOCs and have > a number of servers working. > > > > Intel, etal are catching up with ARM and I have seen ones like: > > > >

On 07/29/2015 04:53 PM, Karanbir Singh wrote: > the biggest blocker to going GA on the x86 build is the kernel; the > distro kernel we end up with isnt going to be the same as the upstream > x86_64 kernel configs. However, there hasent been a huge level of > feedback ( either positive or negative ) around those builds. So if you > are using it, or are interested in using it - do

Hi, Can anyone in the list help me with these queries on Asterisk Business Edition. *1. Why would anyone choose the Business Editon when the whole thing is avalable as GPL?* ** *2. Is there a GUI to manage asterisk?* ** *3. Can it be compared with Asterisk NOW?* ** *4. Is the CD a complete installation package?* ** *5. If im looking for hiring a server on a remote location how will i be able to

I am looking at ways to harden my asterisk install to prevent computer related issues from happening. I am concerned about about disk write cache. That seems to be a major source of hard drive corruption on power failure. Hard Drive corruption is simply unacceptable for the 99.999% uptime requirements of my Asterisk install that needs to be as reliable as a proprietary PBX. Of course I will be

I'm trying to set up a small machine as a server using a Via EPIA SP 8000E mini ITX motherboard. It's got a fanless Eden processor and I'm using a SATA hard drive. The CD drive is removed, as I only wanted it to install CentOS and don't anticipate needing it again. My problem is running this machine with CentOS without the keyboard. I've set the BIOS to ignore keyboard