similar to: Asterisk behind OpenSER - Getting SIP reinvites to work with an ITSP

HI LIST CAN U HELP ME If there are multiple sip trunks with the same ITSP then an incoming call is arbitarily matched to the last peer with the same host IP address. This is not a serious problem because the DID is still correct but it does have many insidious effects due to the incorrect channel name Example register=myaccount1 at sip.myitsp.com/line1 register=myaccount2 at

SetUp: - Asterisk behind a NAT, - Red Hat 9.0 - Asterisk 1.2.14 My Asterisk box is behind a NAT and I have a DiD from an ITSP. I have my dial plan set up so that when outside callers dial the DiD, the call is answered by my auto-attendant. The caller can then select who they'd like to speak to and the call is transferred to the external line associated with that person (usually a mobile

If a call comes into my Asterisk server on a DiD provided by an ITSP and the dialplan sends that call to another external number throught the same ITSP's network, I don't want the RTP packets to pass through my server once the call is bridged. I have had great success getting this to work using IAX, but I have not been able to get this to work with SIP. The call is bridged OK (media at

Suggestions on how to use Asterisk to collect CDRs from a OpenSER-based proxy / call routing setup? I need to get simple CDRs; not for detailed settlement/rating, but just for reconciliation with an ultimate TDM carrier just to make sure we only get billed for what we're actually using. I'd use the often-heralded approach of dumping a call from OpenSER into Asterisk and having it

I have been unable to understand the connection between an IAX registration for dynamic IP assignment and and the host definition. I have signed up with an ITSP for a DID. My ip is dynamic and although I have a dynamic DNS name, we are registering and outbound works fine. I'm at a loss to understand the relationship between the registration and the [section] definition in iax.conf that will

I'm taking the liberty to announce this event on the Asterisk mailing list, as Asterisk and OpenSER form a valuable combination in SIP architectures. The second edition of OpenSER Summit will take place in San Jose, USA ,on the 17th of March, 2008, during VonX Spring 2008 pre-conference events. This is the first US edition of the OpenSER Summit - to learn more about the agenda and layout of

Hi Users, I'm Setting UP the Voicemails by integrating with Asterisk and OpenSER, After 32 sec or 6 ring, it has to go the Voicemail server of Asterisk, In openser.cfg ........... is not hiiting the Asterisk server ............. ... any one help me ........ .... .... modparam("tm","fr_timer",6) modparam("tm","fr_inv_timer",24)

Hi All, I am stuck with an issue in the Openser+Asterisk Forking. In this solution we are using Openser as the Registrar. Hence it will store all the contact bindings along with the q values for a given user, say ua1. The current setup is such that the INVITEs are sent to Asterisk by Openser and Asterisk sends out the INVITE. Now if ua1 is registered with two different contacts having

Hello, I put together a new tutorial about asterisk realtime integration with kamailio (openser). This time the database used is the one of asterisk, also call routing logic is controlled by asterisk, here is the link: http://kb.asipto.com/asterisk:realtime:kamailio-3.0.x-asterisk-1.6.2-astdb Practically is an easier way to scale starting from existing asterisk installations. The other

We have been working a OpenSer/Asterisk solution to replace our Avaya PBXs.The OpenSer is to provide scalability and the Asterisk to provide rich features.I know this has been many times for calling card platforms but I'm not sure if anyone has a good scalable solution they are using on their virtual PBX or in a CPE PBX environment?If so I would like to talk to them about buy their deploying,

Is anybody using XEN in conjunction with Asterisk and/or Openser? I would like to get some info about such an environment and experience reports. bye Ronald Wiplinger

Hello Users openSER is sip proxy and registrar , Asterisk is as PBX, Conference and Voicemail servers, openSER and Asterisk are in the Same N/w Where As the UAC are in Behind the NAT, When Astetrisk is not integrated , UAC are in Behind the NAT is working, openSER is 192.168.2.5 Asterisk is 192.168.2.6 I'm just use rewritehost to asterisk server, UAC ----> openSER - - - ->

Hi! Meanwhile also the location is fixed: it is happening at metalab (http://metalab.at/) - a place for geeks. Thus, we meet there at Thursday, 20.9.2007, 19:00 CEST (=local Vienna time). Metalab is located next to the city hall: http://metalab.at/wiki/Lage Metalab is no pub/restaurant. Thus, don't come hungry! Nevertheless liquid food (drinks) is available. We meet in the library (in

Hi, Please help me understand the following applications and what are its advantages if we compare between each of them. Asterisk, FreeSWITCH, TrixBox, SER, OpenSER, sipX, CallWeaver, and YATE. Regards, Kaushal -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120103/ffad2be6/attachment.htm>

One of the above is frequently used to front-end Asterisk. I used OpenSER to front-end a farm of Asterisk servers and was very happy with it. The ability to take a box out of service or to route a specific DNIS to a box for testing rocks. Since OpenSER has died (I don't care about the politics/personalities/trademarks), Kamailio and OpenSIPS have risen from the ashes. What are you using?

Hello, I am running a small installation of asterisk and looking for future expansion of it to handle thousands of users. From what I read I see that usually large installation place OpenSER (or similar solution) in front of Asterisk in order to provide high call rate because "OpenSER does only signalling while Asterisk does all". My question is: If Asterisk also does only signalling

Hello Users , I Posted to mailing list, No one is replying My issues, My Issue is No Audio when Openser and Asterik integrated in Same LAN , When UAC are Behind the NAT, With out the Asterisk integration Behind the NAT is working Fine. SIP port and RTP ports are forwarded into router to OpenSER System only. openser.cfg listen=192.168.2.11 alias=sip.hyperion.com # Invite Section if ( method==

Hi, I need some help, getting to work asterisk MWI. I set up Asterisk as voicemail server for Openser as this tutorial shows : http://www.voip-info.org/wiki/view/Realtime+Integration+Of+Asterisk+1.4+With+OpenSER+1.3 . My voicemail system is working but, I can't get to work the message waiting indicator. It doesn't seems to send the Asterisk any NOTIFY message to the Openser box. How can I

Hi all, I try to make a call from my Openser(SIP Proxy) to the asterisk in different machine. I use my asterisk as a trunking gateway. I can make a call from my openser to some trunking gateway such as my cisco 5300 or welltech 5250. In the same method, I try to make a call to asterisk ( sip listen on udp 5060 ) I use ngrep on my asterisk machine and list as below. But I can't find any sip

Hi, i use asterisk with freePbx for all configurations. Now i want use a openser with asterisk but also with freepbx. I pretend use the asterisk whit freepbx, but autentications for users in openSer.. it's possible?? thanks -- Carlos Jer?nimo