similar to: T.38 FAx

Hi all, I install the last version of Asterisk and I tried to send faxes, but nothing works. Here is my configuration: Analog Fax <----> IP <----> Asterisk <----> IP <----> Patton M-ATA <----> Analog Fax 2 I tried Analog Fax 2 -> Analog Fax but nothing works!! In the Patton configuration I put G711 and no silence suppression. In asterisk I have

Hi list, I'm evaluating a private telephony scenario of about 20 locations - 300 phones, 50 FAX machines. Initial overview points to the installation of asterisk at three locations connected to the PSTN via ISDN PRI. All other locations, small by themselves, would get SIP phones managed by asterisk, since there is good IP connectivity between all sites. Now on to the

To provide a reliable fax solution for users connected to a Asterisk 1.6.2.6 server i have tested a few T.38 capable ATA's: - Patton M-ATA - Grandstream HandyTone 486 - Fritz!Box 7170 I have tried Asterisk 1.6.2.6 compiled with SpanDSP-0.0.6pre17 and also Asterisk 1.6.2.6 with Fax for Asterisk installed. These Asterisk servers are connected to a Cisco PGW 2200 + AS5400XM. Sending fax

2009/3/17 Olivier <oza-4h07 at myamail.com> > > > 2009/3/16 Olivier <oza-4h07 at myamail.com> > > Hi, >> >> I'm rather new to this domain so I may be doing stupid things without >> being concious of that. >> >> I've got a Patton MATA I'm trying to setup as T.38 fax adapter. >> Whenever I connect a fax machine (Dell

Anyone have experience with T.38 passthru in Asterisk 1.4 to a MAX TNT Media Gateway? We're experiencing sporadic results... Topology is described below... Thanks in advance.. -Joe Traditional Fax <-Analog Line-> ATA <-SIP-> Ast1.4T.38Passthru <-SIP-> MAX TNT <-PRI-> PSTN -------------- next part -------------- An HTML attachment was scrubbed... URL:

2009/2/5 Olivier <oza-4h07 at myamail.com> > Hi, > > Here http://www.voip-info.org/tiki-index.php?page=Asterisk%20T.38 is a > table listing ATA/Gateways combinations. > Could anyone successfully set a Patton M-ATA to work with another one, > using Asterisk 1.4 ? > > Is reinvite (canreinvite=yes) necessary or not ? > > Regards > > Replying to myself, I

I understand that Asterisk 1.4 should support T.38 pass-through, but I need Asterisk (or something on the Asterisk box) to act as a T.38 endpoint. Judging from the unclaimed $12,000USD bounty, it doesn't appear that Asterisk itself can do this. http://www.voip-info.org/wiki-Asterisk+T.38+Bounty Does anyone have any experience with this, or are able to point to an example of this working?

Hi, Has someone met success setting a Patton M-ATA to work in T.38 ? In my experiences here, it seems this ATA don't switch to T.38 whenever a fax signal is heard on its FXS port. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090205/79d0a70f/attachment.htm

Hi, I'm rather new to this domain so I may be doing stupid things without being concious of that. I've got a Patton MATA I'm trying to setup as T.38 fax adapter. Whenever I connect a fax machine (Dell MFP1815dn) or a phone to it, I can successfully send a fax or talk to the other end. Whenever I connect a fax modem (Dell Inspiron 6400 laptop), I keep getting "No signal. Line is

Hi, Here http://www.voip-info.org/tiki-index.php?page=Asterisk%20T.38 is a table listing ATA/Gateways combinations. Could anyone successfully set a Patton M-ATA to work with another one, using Asterisk 1.4 ? Is reinvite (canreinvite=yes) necessary or not ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi! I have exactly the same problem on asterisk 1.8.22.0 and also on separate 11.2.1 when sending fax to PSTN. Tryed with spa-3102, spa-2102, Patton Smartnode 4634, and Zoiper softphone. SpanDsp also works without any problem on my box. As I remember it was a bug in 1.8.1.x that the a=T38MaxBitRate paramater was sent as "maxBitRate". Without capital "M". Are you closer to

On Wed, 4 Oct 2017, hw wrote: > Jose Maria Terry Jimenez wrote: >> El 4/10/17 a las 17:45, david escribi?: >> >>> Folks >>> >>> A have a PCIe modem (Conexant ChipSet, PCI id = 14f1:2f83. It interfaces >>> to my land-line (POTS) telephone line in the United States. On Windows, I >>> had a good answering machine package (Ventafax)

What I have is: * Asterisk 1.8.10.1~dfsg-1ubuntu1, * SPA112 ATA with analog fax in 1-st FXS port connected, * SIP trunk with provider supporting T.38. My network looks like this: * spa112 (192.168.33.200/24) and Asterisk (192.168.5.253/24) in neighbouring LANs, * Asterisk connects to the provider (80.75.130.136) via router (82.200.7.184). Router has full DNAT to Asterisk server. What happens?

Jose Maria Terry Jimenez wrote: > El 4/10/17 a las 17:45, david escribi?: > >> Folks >> >> A have a PCIe modem (Conexant ChipSet, PCI id = 14f1:2f83. It interfaces to my land-line (POTS) telephone line in the United States. On Windows, I had a good answering machine package (Ventafax) that reported CallerID, recorded messages, sent/received fax, and had a scripting

me at tdiehl.org wrote: > On Wed, 4 Oct 2017, hw wrote: > >> Jose Maria Terry Jimenez wrote: >>> El 4/10/17 a las 17:45, david escribi?: >>> >>>> Folks >>>> >>>> A have a PCIe modem (Conexant ChipSet, PCI id = 14f1:2f83. It interfaces to my land-line (POTS) telephone line in the United States. On Windows, I had a good answering

Hi, I am building for a customer an * solution that will use 2 Digium cards. 1 x TE110P (T1 ISDN PRI) 1 x TDM40B (4 analog ports, 2 for faxes, 2 for extensions) The system will be connected to the PSTN through the T1 ISDN PRI interface. All customer extensions will be SIP phones except 2 fax machines that will use the analog FXS ports on the TDM40B card. I have been investigating on this

Does anybody know of an ATA that works well with * and supports T.38 fax relay? The Cisco ATA186 does not support T.38 and I don't think the Sipura does, but I don't know for sure. I'm not talking about running fax over an ATA with g.711, I want actual support for T.38. Thanks. Peder

This is what you show CBeyond. You have some vouchers there from CBeyond that will allow me to get paid from them not you. Chuck Coleman President CCI Technologies/CC Call Center/CSI Technologies Director of Managed Services for Gurus2go Cell 510-439-6501 Confidential Email: This email and any files transmitted with it are confidential and intended solely for the use of the individual or

This is one long letter about T.38 and Asterisk. I hope it will help me, and lots of other Asterisk users to understand some T.38 problems with Asterisk. This is my situation: I have Panasonic DX600 FAX machine. It's connected to Asterisk 1.2.13 thru ATA adapter (I have used both, Cisco 186 and Grandstream HandyTone 386). Asterisk is connected with my SIP provider. That link that my provider

Hi, I am trying to fix a Asterisk setup with buggy (POTS) Fax machines. The setup consists of the following components: - A Digium TE121 for connectiong to E1 ISDN - Debian box with Asterisk 1.4 - Grandstream GXW-4008 SIP ATA to which the Fax machines connect I am aware of the problems with this type of ISDN <-> Asterisk <-> SIP ATA <-> Fax machine installations, e.G.