Displaying 20 results from an estimated 600 matches similar to: "misdn and prostgres_cdr on asterisk 1.4"
2006 Jun 13
1
sound quality problem on mISDN
Hi
I've problem with incoming call quality to GSM gateway connected to
beronet card (BN8S0),
-----> [ GSM Gateway ] -------> [ BN8S0 ] ==== asterisk
Port connected to GSM gatway is in TE mode , gateway is in NT mode ,
When I dialin to cellphone numer , call goes to 'from-eragsm' context,
to Echo application.
[from-eragsm]
exten => 700,1,Goto(600,1)
exten
2006 Jun 01
0
Problems with misdn and BN8S0
Hi
i am experiencing some problem with asterisk and misdn
i've patched and recompiled the 2.6.15.5 kernel on the server
i use a BN8S0 card with alla channels in TE mode.
i can load hfcmulti and mISDN_dsp
i load this with:
/sbin/modprobe hfcmulti layermask=0xf protocol=0x22 type=0x08
and then
/sbin/modprobe mISDN_dsp
dmesg returns me the following:
Modular ISDN Stack core $Revision: 1.34
2006 Jun 02
2
BN8S0 Installation problem - 0 devices registrered
hi
i am experiencing some problems with the configuration of an BN8S0 Beronet card.
I've downloaded last CVS of mISDN ans mISDNuser, i patch the kernel
2.6.16.18 and the enabled the following:
<*> ISDN support
x x Old ISDN4Linux --->
x x --- CAPI subsystem
x x <M> CAPI2.0 support
x x [*] Verbose reason code reporting (kernel size +=7K)
x x [*]
2007 Jul 24
2
Astribank-8BRI
Hello,
I'm in the process of building an Asterisk machine and need 5 or 6
BRI-Channels. I was looking for the beroNet and Junghans cards and
stumbled upon the Xorcom Astribank xBRI products.
Has anybody tried out the Astribank xBRI-Channel Banks? Are they
production ready or should I go with a beroNet BN8S0 or JUNGHANNS.NET
octoBRI ISDN?
Thanks in advance,
Lars
--
We don't like their
2010 Apr 28
2
BN8S0, dahdi, wcb4xxp
Hi,
a few month ago, I tried to install zaptel for my Beronet BN8S0 pci card... I
gave up and took hfcmulti/lcr. Now dahdi (2.2.1.1) seems to support the card
and I'm very interested to get it to work.
But how to get rid of these annoying qozap driver?
bishop dahdi # lspci -v -nn -s 01:00.0
01:00.0 ISDN controller [0204]: Cologne Chip Designs GmbH ISDN network
Controller [HFC-8S]
2006 Feb 02
2
Regarding cdr_manager.conf
Hello,
My question is.. How does cdr_manager work? Does it suppose to populate
cdr-csv/Master.csv? What about the cdr table on the database? What is the
event some people talk about?
I have changed (and reloaded) my configuration of cdr_manager.conf to
;
; Asterisk Call Management CDR
;
[general]
enabled = yes
and it doesn't seem to make any difference. After originate a call from the
2009 Dec 23
1
Can't load cdr_radius.so module?
hi , all
when i do the command "module load cdr_radius.so" ,error happens.
i have installed radiusclient-ng , what's wrong with it? thanks!
error message as follow:
ZHANGSHUKUN*CLI> module load cdr_radius.so
Unable to load module cdr_radius.so
Command 'module load cdr_radius.so' failed.
[Dec 23 17:55:41] WARNING[31072]: loader.c:380 load_dynamic_module:
Error
2013 Apr 26
0
glibc detected crash
Hi
I have asterisk 1.8.18 with freepbx 2.10.1.9. I get an asterisk crash occasionally with the followingerror. It always seems to happen while paging.
16 spa508g phones
1 snom pa1 paging amp
Kelly
== Extension Changed 1101[ext-paging] new state Idle for Notify User 101
pbx*CLI> *** glibc detected *** /usr/sbin/asterisk: malloc(): smallbin
2008 Jul 15
4
Iterations
I have a command that reads in some data:
x <- read.csv("Sales2007.dat", header=TRUE)
Then I try to organize the data:
sc <- split(x, list(x$Category, x$SubCategory), drop=TRUE)
Then I want to iterate through the data. I was able to get the following to run on the R console:
for(i in 1:length(sc))
{
sum(sc[[i]]$Quantity)
}
But notiing is primted on the console. I find
2006 Jun 08
1
BN8S0 problem - Extension can never match, so disconnecting
hi
i've configured a Beronet BN8S0 Card with misdn beronet utility.
the card is configured with all lines in TE and P2P mode, and it is
connected with the special cable with an ISDN connection.
i've turned on debugging to level 4, this is the output from the
asterisk cli when i receive a call:
P[ 5] MGMT: Short status dinfo 1000001
P[ 5] MGMT: SSTATUS: L1_ACTIVATED
P[ 5] handle_frm:
2007 Dec 15
0
OpenVox B800P and asterisk 1.4/ mISDN-1_1_7
Hi
i've installed this software:
******************** SOFTWARE
mISDN-1_1_7
mISDNuser-1_1_7
Asterisk-1.4.15
******************** SOFTWARE
misdn is correctly loaded by misdn-inist start
Here there is the misdn.conf (copied from an existing and working
installation with Asterisk 1.2.x and one BN8S0)
******************** MISDN.CONF
[general]
misdn_init=/etc/misdn-init.conf
debug=0
bridging=no
2010 Oct 05
3
Asterisk CDR Radius error
Hello,
I'm trying to configure Asterisk with Radius cdr support.
Asterisk version 1.6.2.13
Server Radius: Freeradius version 1.X
Radius client: radiusclient-ng version 0.5.5
With the Asterisk core debug on 1 when a call terminate, on the console
appear this error:
Unable to create RADIUS record. CDR not recorded!
My cdr.conf is:
[radius]
usegmtime=yes ; log date/time in GMT
2009 Nov 25
0
asterisk + res_config_ldap = asterisk.core
Greetings.
Attempting to connect Asterisk to LDAP database using res_config_ldap
module. While trying to register sip client (Ekiga softphone),
according to slapd.log, asterisk connects to LDAP server, asks for
some attributes to modify (they do exist, and asterisk user has all
permissions to do that,
etc). And then asterisk application just crashes.
Without ldap (using just static users'
2007 Dec 26
2
No cdr_csv after upgrade from 1.2.x to 1.4.x
After upgrading from 1.2.x to 1.4.x call detail records are not being
written to /var/log/asterisk/cdr-csv/Master.csv
In cdr_manager.conf I have
[general]
Enabled = yes
Apparently there is something else that needs to be configured for call
detail records in 1.4.x. Can someone point me in the right direction?
Don Pobanz
2016 Sep 27
2
Asterisk Radius CDR
I did radius client status testing with radius server, able to access the
radius server. However, still getting radius CDR issue after setting debug
level 8 even granting 666 access to radiusclient-ng config files.
message: cdr_radius.c:208 radius_log: Unable to create RADIUS record. CDR
not recorded!
Please advise if I missed out anything.
Date: Mon, 26 Sep 2016 12:09:34 +0200
> From:
2006 Jun 05
2
Duplicate CDRs
Hi
For whatever reason we've getting 2 or 3 CDR lines logged for each call,
often in different formats:
as1:~# grep test-89-1e2c /var/log/asterisk/cdr-csv/*.csv
2016 Sep 28
3
Asterisk Radius CDR
Hi Andrew and Willy,
Thanks for sharing the info.
As for enabling radius server debugging 'radiusd -X', made some test calls
don't see the radiusclient sending data to radius server. However, using
radtest or radiusclient testing, able to send data to radius server (after
enabling debug).
For further testing, on my other server using OpenSIPs, setup the
radiusclient and data was
2004 Oct 20
2
chan_mISDN problem
I'm using avm fritz card usb with kernel 2.6 patch with mISDN. The module is load correctly when I type lsmod I've got the following output:
Module Size Used by
zaptel 178308 0
avmfritz 21388 0
mISDN_isac 14336 1 avmfritz
mISDN_dsp 191424 0
l3udss1 34184 0
mISDN_l2 39040 0
2006 Feb 22
1
FC4 and yum install; how to configure questions
I installed FC4, ran command, # yum install asterisk. A bunch of stuff
happened, but can't locate .conf files. I have a list of files:
/usr/share/doc/asterisk-1.2.4/configs/features.conf.sample
/usr/share/doc/asterisk-1.2.4/configs/rtp.conf.sample
/usr/share/doc/asterisk-1.2.4/configs/extensions.conf.sample
/usr/share/doc/asterisk-1.2.4/configs/logger.conf.sample
2008 Sep 04
1
TVPaint (SafeNet dongle protection)
Hi,
I'd like to use TVPaint with Wine. I know it can run (I ran the demo witch desn't need the SafeNet dongle installation, there is a few "bugs" but it still can be used.)
I've been told someone did a patch to use SafeNet sentinel protection dongle (I've try to use it but unsuccessfully as I'm not very good for programming).
Can someone tell me if it's planned