similar to: International Carriers

Hello: I want to have a local telephone number that, when the people calls this number (via mobile or normal PSTN), the voip provider stablishes a SIP session to my asterisk box. It is possible? If yes... What providers have this service in Europe? It is difficult to configure and get things working ok? Will my asterisk box see the mobile or normal PSTN phone# that is calling the number

Hello everybody! I've seen that you can connect your cellphone via bluetooth, but I've a Motorola V300 and it doesn't have that feature, so I wish to connect it via USB cable, is it pissible con use my cellphone with asterisk like that? I 've not been able to find information on how to do this, I'l appreciate any help. Thanks in advance! -- Facundo Ameal.

Dear Asterisk Fans, I'm an Asterisk consultant in Argentina and want to make an spanish wiki (something like voip-info.org). I have the idea and some concepts about this project. It won't be a comercial project, it would be free and it's target would be spanish talking asterisk enthusiasts. I'm wrinting these for the sake of finding contributors, people who want to help me

Hi everybody! I'm from Argentina, so you'll have to sorry me for my English. I have a Linux box with asterisk and want to buy an ATA. Fist, I thought about the Grandstream HandyTone but I read some reviews which says that it has a lot of echo. Some people recommended me Sipura 2000 but I don't know what to do. Now I just to make some tests at home and see what happens and if it works

Hello everybody, I'm installing an Asterisk 1.2.7.1 with GNUDialer 0.98-puff18. It also has zaptel from CVS. My FXO is an X100P Clone. The agents from GNUDialer log ok, and everything is fine until the GNUDialer makes a call, as soon as it engages (the phone starts to ring) asterisk crashes with these messages: > Channel Zap/1-1 was answered. -- Executing

Hi everyone! I'm having some issue trying to place calls with asterisk connected to an E1 R2 from Telmex Argentina. The other E1 port is connected to a Meridian which also uses R2 protocol. Calls sometimes fail with different error messages such as: Unicall protocol error 32773, 32772, 32769. Some other calls fail saying: Far end disconnected(cause=Destination out of

I have a doubt... is it posible to do Video Conferencing using asterisk? -- Facundo Ameal. fameal<at>gmail<dot>com Linux User #395088 Open your mind, use open source.

28th February I am working with Asterisk 1.2.15. I have configured sip.conf for two soft phones (I am using Xlite).I have installed the Bluez stack and so far, i manage to make a phone call from a soft phone to a GSM network. However, i have an audio problem. The soft phone can be heart by the GSM costumer but the voice in Xlite is not transmitted to the GSM. In asterisk all i got is the

Hello everyone! In my humble try of creating a Blog, I've made this: http://fameal.blogdns.org. By now, it's hosted in my own server but shortly it'll be moved to a serious hosting. All post are written in spanish, so it's only for spanish talking people, I will try to make it grow and have english articles. If someone is interested in writing in english (obiously I would help) I

Sorry, I haven't received a message in a few hours, just testing to see if it is alive.

Hello, I've tried to transfer a IAX call to a number configured on a traditional PBX, but it doesn't work. I have a traditional PBX connected with a zap channel to Asterisk in the following way: IAX/SIP client --> Asterisk (FXO) --> (FXS) traditional PBX ---> OFFICE Phones Asterisk is connected to the PBX with an internal number configured inside it. In other words i keep an

I thought I read somewhere that you no longer have to do a special make command for the 2.6 kernel. Is this true, or should I still make linux26? I'm having problems getting anything zaptel to load properly. ---- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I've been trying to bring our Asterisk server to the latest version. I've grabbed the latest CVS and upon trying to compile zaptel, I get the following errors: gcc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o gendigits.o gendigits.c gcc -o gendigits gendigits.o -lm ./gendigits gcc -I/usr/src/linux-2.4/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB

Hi, In a normal PBX environment a user usually calls in and IVR's are played according to a predefined dialplan. Iam trying to develop an application where asterisk dials out to a user and initiates an IVR instead (please note that the IVR is not static and may vary according to different condtions). Can someone guide me how this is possible using Asterisk. Do I need to write some sort of

Hi all I sold new TDM800P card with 8 FXO ports, someone know if can be use this card on AsteriskNOW or trixbox? What can i do for use this card? Thanks. ---------- RafaelCanchola Product Development Engineer, FonetGlobal Inc. rcm at fonetglobal.com http://www.fonetglobal.com Ph. + 52 800 022 10 21 ext. 214 + 52 442 167 08 00 VoIP 523663899 d00d! cyberalph -------------- next part

A customer of mine wants an IVR where the first 3 choices are 1 English 2 Spanish 3 French I can build the IVR but how do I get the system prompts to then speak the selected langauge. For example, a caller has selected Spanish and so is routed to the Spanish part of the IVR. At some point he breaks out of the IVR to leave a VM. How does the system know to continue offering him Spanish?

I'm developing a small linux/speex-based audio streaming (VoIP-like) application, and am looking for a binary windows app that can play speex content (at least from a file, preferably from an IP data stream) out through the windows sound system. This would be very helpful as a test tool. Any recommendations? I'd prefer a binary as I don't have development environment available for

Hi all, I'm new in the forum, and although I have some experience in Asterisk, I've never work with Asterisk FXO, FXS, E1... cards. I have several costumers with ATAs working with my SER. However one of them bought an Alcatel PBX OmniPCX Enterprise and now he wants I give him a E1 interface for interconection with its new PBX. I understand I need a E1-IP gateway which could be Asterisk

Dear all, I have been using Speex during last year over PC with very good results. Now I'm trying to move my code to the DSP TI C6713. It's the first time I work with a DSP and with Code Composer. I use speex quite well but I'm not very good at compiling for different platforms. After reading all manuals I tried to compile the speex library with Code Composer and the speex options for

Interested in building a speex codec (basically audio <-> speex <-> data stream) using TI's small MSP430 microcontroller. Is there any way to estimate feasibility based on CPU requirements? Example - speex is happily encoding on an old Pentium-1 processor (166 MHz) using about half the CPU (as reported under Linux); the TI microcontrollers are much slower yet (8-16-25 MHz) and