similar to: Adding 4 more POTS lines

I'm currently looking to deploy an Asterisk server using an FXO media gateway to connect to the PSTN and was looking for any user experiences that may aid in selecting a gateway. Specifically i'm looking for a 4-port model under 500 dollars. Within this category exists: MediaTrix 1204 Grandstream GXW-4104 AudioCodes MP114 I've read over Voip-info.org regarding these products and

Has anyone used either the 8 port or 4 port FXO device from Grandstream? (GXW-4108 or 4104). They seem to be the lowest cost multi port FXO devices that I can find, so I'm getting ready to buy the 8 port version. I just want to see if there are any opinions on the device before I commit to the purchase. If people have not used the Grandstream, are there any issues with using

Hello list ! I don't have the money to test out all the products and reading the manuals is not always that enlightening... Does someone here know a good gateway-product that lets analogue telephones communicate with an Asterisk-server. I have found the Grandstream GXW-400x to be able to add SIP-accounts to analogue telephone devices that are connected to the FXS-ports. Moreover this

Hey everybody, Is it alright to run two TDM400s on the same machine? If it is, how would one differentiate between the channels on each card? So, if I'm running strait FXS and my first card is fxsks 1-4, would the second be fxsks 5-8? Would there be any interrupt problems? Any help would be great! Thanks! Tj -------------- next part -------------- An HTML attachment was

Dear, I'm having problems with the configuration of this gateway(GrandStream GXW 4108), I used the instructions from GrandStream but it doesn't work. Someone has a good configuration for this gateway? Thanks in advance, Nelson -------------- next part -------------- An HTML attachment was scrubbed... URL:

Dear all, Just wanted to know if any one had deployed the Grandstream GXW 4024 yet. Wanted to hear any feedback and/or problems with this unit that you may have experienced. Thank you. -- Faraz R Khan Chief Architect Emergen Consulting Pvt Ltd www.emergen.biz

Hi, I have an 8-port Grandstream GXW-4008 V1.2A ATA converter with analog phones connected to it. They work fine except for just one "feature" I would like to modify. Somehow, each time the ATA re-registers the SIP clients or each time the device has to be rebooted for maintenance, the phones ring once. This feature can be useful as it notifies the user of the re-registration.

Hi, I am trying to get a SIP extension's status without actually making a call. I am using sofia-sip's "options" example utility and the sip clients are SJphone softphones.

Hi I am looking for a source for an OpenVox card. Has anyone purchased through http://www.voiplink.com or do you normally use another vendor or OpenVox.cn directly? thanks Tim -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090705/6d90b996/attachment.htm

Hello all you Gurus out there! Please could you explain something to me: Currently I try to get ENUMLOOKUP() working. Naturally I do all the testing with my own number. I registered my number at e164.org I paid for registration of my number at a registration agent for e164.arpa (I know, I don't need both. I just did the .arpa registration first and later discoverd the free .org service....)

Hi, I am trying to fix a Asterisk setup with buggy (POTS) Fax machines. The setup consists of the following components: - A Digium TE121 for connectiong to E1 ISDN - Debian box with Asterisk 1.4 - Grandstream GXW-4008 SIP ATA to which the Fax machines connect I am aware of the problems with this type of ISDN <-> Asterisk <-> SIP ATA <-> Fax machine installations, e.G.

Hello, I have a TDM400P with 4 FXO ports, currently using three. When sending or receiving calls on this card, there is a nearly constant popping/clicking sound, it is related to the echo cancellation?. I adjusted my gains properly, but to no avail. I even found that setting echotraining=no in zapata.conf didn't change the scenario at all. I've plugged analog handsets into the

HI, I have 2 TDM400s plugged in a PC. I failed to use same channels to make a call to PSTN. It shows it can't establish connection after dial command issued. Below is the log. Actually, the call is established as I can hear voice from the called party but the softphone is still showing ringing. It seems the TDM card can't get an answered signal from PSTN. After 15 seconds, the call

I own a TDM2400 board, with three FXO modules and one FXS. I'am having trouble with analog sip phones, from two different equipment. (Grandstream GXW-4024 192.168.0.105, and Audiocodes MP202), sometimes when I am calling someone, then I press flash, and then call someone else, both calls stay connected after I hang up. [Sep 29 07:18:06] VERBOSE[3218] logger.c: -- Called g2/16 [Sep 29

Hello, I have a friend that is asking if he can use his Ericsson 3413 H.323 IP phone with Asterisk. I can't seem to find any reference to this phone on the Wiki... -- Vice President of N2Net, a New Age Consulting Service, Inc. Company http://www.n2net.net Where everything clicks into place! KP-216-121-ST

I realize this may be slightly off-topic but I'm wondering if someone here can lend me a hand. One of my GXW4008 has gone "unconfigurable" via standard HTTP (refuses connection) and I can't use the built-in IVR because I had previously disabled the "keypad update" feature. So I'm stuck with just telnet, the reset button and RS-232. Telnet commands are very limited

How well does the Grandstream GXW-4104 or (8) work w/Asterisk? I would use a Cisco Switch w/FXO Ports but that would be a little "Pricy" I Can't use a Digium FXO Card, as the asterisk Server is offsite. Thanks, William Stillwell KI4SWY ________________________________________________________________ Sent via the WebMail system at kotbh.net

Hi All, after looking around for info on XFS(the filesystem) and its use on CentOS and/or RHEL 4. There seems to be a lot of noise about 4K Stacks (especially on linux-xfs at oss.sgi.com). So what is the best way to get XFS working with CentOS 4.3 ? And not have something like this happening. A quote from the xfs list at sgi >On Tue, 18 Jul 2006 at 10:29am, Andrew Elwell wrote >

Hello everyone! I'm planning on setting up a new system shortly and can't pick the right card... We will have 2 or 3 lines coming in and 7 extensions (GXP2k's). Should I just get 2 or 3 X100P cards? Or do I need the Sangoma A20200 or even the A20200D (Echo cancelation)... I was thinking I'd use a Dell 2.0 GHz machine as the server... If anyone has suggestions as to

Evening all. I'm looking at building an Asterisk system for one of the projects of the Charity where I'm the SysAdmin. The project has two analogue phone lines - BT Featureline Compact, we're in the UK - that I'd like Asterisk to handle. My current quandary is which FXO interface to use. I've been looking at the Digium TDM400P and Sangoma A200, which are similar prices for