similar to: dialplan and "*"

Hi, I have a problem with Queue where by a call comes in to the queue and if all the phones are busy and the queue reaches the timeout, it will fork a process and leave it sitting there before going off to the next step in the dial plan and continuing normally. This doesn't cause any problems except for I assume that it will eventually use up all the memory on the machine and it messes with

Are you using freePBX by any chance? Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Nigel Roberts Sent: 08 November 2006 08:55 To: asterisk-users@lists.digium.com Subject: [asterisk-users] Queue forks asterisk and then leaves the extraprocesses lying around Hi, I have a problem with Queue

Hi, Hi All, I've just delved into the world of asterisk and I'm having a few dtmf issues. Internally, amongst sip phones, dtmf is fine. Externally, if you ring from a GSM mobile, DTMF is fine, however if you ring from a standard phone, DTMF fails to register. I am attempting to use a quad port HFC-4S Beronet Card. I've been searching the web most of the last week and

hello, I've callcenter and our queue members want to see on their IP phone's display queue's name , from which incoming call was originated, for example "<client's_number> -> Sales". This problem appears when one member can belong to couple queues. Work around would be setting calling name with such information. Maybe there is another way (setting SIP

Hi, I've just read the postings regarding the interworking between * and SER. As these persons seem quite knowledgeable on this, I would like to have their advise on my planned installation: - I have broadband cable access - I plan to install a SIP-aware router - I plan to install a Linux server with Digium analog IF card(s) for connection to my analog line (incoming and outgoing) - I plan

I've a call center using IAX softphones provided by a third party. We've observed problems where the IAX phones seem unable to use our PRI trunks. A sample anonymized call is provided below with the PRI debug calls embedded. Any thoughts, comments or suggestions would be welcome. In anonymizing it, I preseved the format and number of digits sent. -- Accepting AUTHENTICATED

Hi, I'm planning to buy a new ISDN-PBX (I hope this is the right term for an ISDN phone system). I would also like to connect it to asterisk. As far as I know there is no ISDN card where I can connect an ISDN-Phone to directly working together with asterisk (please correct me if I'm wrong). So what I was thinking of doing was to get a regular ISDN PBX and add a second internal S0 bus

Hello, I have one problem and I need to disable dtmf (disable rfc2833, info and inband) on one (other peers must support dtmf) SIP peer . Is it possible? Workaround would be use g729 codec with dtmfmode=inband. Maybe there is better solution? Thanks for help. -- Pagarbiai / Best Regards, Giedrius Augys -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anybody have a good link how to connect Sipura with Asteriks, both behind NAT? I'm using FWD but their connection is like a weather (especially IAX), I need something more reliable. I was thinking of using stun and/or proxy but can not find any good link explaining how to setup Linux server -- #Joseph

Hi, is it possible to use Asteriks for translating SIP to H323 and vice versa? I am looking to implement the following Setup SIP UAC <-> SIP-Server <-> SIP/H323 Proxy <-> H323 Server <-> H323 UAC Basicly i want SIP fones to talk to H323 fones and and SIP Fones to access PSTN Gateway(s) in a H323 network. Anyone got something similiar running? Any ideas? best regards,

Hello, I've asterisk 1.4.22. I need to that the first conference user hears "You're the only conference user..." . When the second user joins (without recording his name) , the first user only hears "new user have join" , when the third user joins to conference, others hear "new user have join" and so on. I'll try to do this with meetme, but it always

Hello, Is it possible, that during the call one side , for examples clicks the button on the web, and this call starts recording? It's possible with asterisk feature automon and DTMF. So it is possible to start recording the channel using AMI or ... ? Thanks -- Pagarbiai / Best Regards, Giedrius Augys -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello there everyone, Well I have set up Asteriks 6.0 and almost have Freepbx working too. However, freepbx is showing me that /var/run/asterisk/asterisk.ctl is not found. I confirmed that by going to the directory. How do I get /var/run/asterisk/asterisk.ctl put in correctly? I am using a Ubuntu 8.10 system. Thanks much.

Hi I am trying to setup asterisk to do a mass deploy of some snom phones. I can't find where i configure asteriks to listen to the multicast address, nor where to set the notify reply. I was hoping to not have to use dhcp options alex -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 197 bytes Desc:

All, I am trying to set a monitor file from the queue.conf as specified on http://www.voip-info.org/wiki/view/Asterisk+config+queues.conf In order to avoid the default MONITOR_FILENAME format wich is: "agent-xxxxx-uniqueid.wav" for example "agent-10017-1266438575-26.wav" As you may now, when using the queue command you are not able to know which agent will take the call,

Hi all Does anybody know where this command is supposed to go? Set(MONITOR_EXEC=mv /var/spool/asterisk/monitor/^{MONITOR_FILENAME} /tmp/^{MONITOR_FILENAME}) In the queues.conf file it talks about it. So I naturally thought after I set up my monitor with monitor-format = wav monitor-type = MixMonitor That I could put a lame command in there to convert and move the file elsewhere for backup with

Hi all, we are running some Asteriks (version 13 on Debian Stretch) as VM/kvm in datacenter and have trunks with other Asterisk (v1.8 11 or 13) instances behind FW. Problem we face is that when we reboot the DC Asterisks, the trunks (SIP or IAX) become alive from DC Asterisks to clients ones but UNAVAILABLE the other way. In clients logs we see Registration for 'XXX at

Hello, My situation is that , I can't make calls with asterisk, but with x-lite works fine. Asterisk shows , that successfully registers with another SIP server, asterisk sends invite, gets trying, and after 30 secs asterisk gets 408 Request timeout. And as I said , with x-lite no problems. I heard that for comercial purposes, this SIP server detects asterisk , and ignores him. Or maybe it

Hi, I have problem with Asterisk 1.6.0.1. I need to change language for playing prompts in Lithuanian. But in Asterisk 1.6.0.1 version everytime plays in English, but in Asterisk 1.4.x I haven't any problem. Maybe it is a bug ...? So I paste my test dialpan and prompt's locations. I hope this helps you. Files are: [root at voip asterisk]# find /var/lib/asterisk/sounds/test -name

Hi I have this in my queue extension and I see this in asterisk when I call to the queue, but no file is created in the directory any ideas? exten => s,1,Set(MONITOR_FILENAME=/var/spool/asterisk/queuecalls/QSAMPLE-${UNIQUEID}) -- Executing [s at kundservice:1] Set("SIP/0850001175-b7942770", "MONITOR_FILENAME=/var/spool/asterisk/queuecalls/QSAMPLE-1228382046.12") Regards