similar to: Initial DTMFs arriving too quickly?

We need to conference together a call center agent, a customer and a third party IVR and send DTMF tones from the agent to the IVR. MeetMe has been eating our DTMFs so we'd like to try app_conference. Has anybody setup such a configuration in app_conference and how did you configure it? -HJC

Hi, I've solved the flash transfer problem changing the flash time in the zapata.conf file, I've set: flash = 200 (the defualt was 750 ms) in the extensions.conf the code is for example: exten => 42,1,Flash() exten => 42,2,SendDTMF(42,250) exten => 42,3,Hangup() now the transfer with flash works correctly. About the question whether my PBX expects a hook flash for

Hello A user seems unable to type DTMF in our Asterisk IVR menu. Can this be due to their phone or PBX that disables DTMFs when a user is off-hook? Thank you.

Hi, I've just installed DAHDI at two PBXs as follows: *PBX-1 PBX-2* FXO ------------- FXS When I try to send calls from PBX-1 to PBX-2 I just receive the message: "Starting simple switch on 'DAHDI/1-1" It seems like if PBX-1 couldn't send DTMFs, but when I set immediate=yes at chan_dahdi.conf at PBX-2 dialplan is executed at PBX-2 but nothing is heard at

Hi I'm trying to generate a Recall/Flash on an FXO (TDM400) connected to a PABX and failing at the moment. I was using the Flash application, which seems to generate a hook flash as opposed to a Recall. Debugging the Zap channel output using a second FXS channel gives me the following << [ TYPE: Null Frame (5) SUBCLASS: N/A (0) ] [Zap/1-1] << [ TYPE: DTMF (1) SUBCLASS: 1 (49) ]

On Mon, Nov 17, 2008 at 10:20 AM, Tony Mountifield <tony at softins.clara.co.uk > wrote: > > If I do this from an NEC digital extension I get 141496920000, but if I > do > > it from an NEC POTS extension I get 1942124000 > > That looks like when you pick up the analogue phone and dial 9, it > immediately opens the outgoing line and sends the 141 acces code, but >

Hi, I am looking to integrate Asterisk with a Siemens HiCom 150e via BRI and wondered if anyone is able to offer any advice. In simplistic terms, my goal is to pass calls from the HiCom to the Asterisk box. e.g: HiCom user dials access code and can call Asterisk extension or establish SIP call over Internet. Likewise, I'd like Asterisk to be able to present a call to the Hicom, either

I have a strange problem with overlap dialing. I installed an asterisk server between a Siemens HiCom PBX and our telephony provider. Everything is working fine except some strange problems with the dialing of the fax (connected to the HiCom PBX). It seems to me that if dialing takes too long Asterisk just hangs up the channel without recognizing that the fax machine is still dialing: (Fax gets

Hello, we have a PRI (E1) to a carrier and a second one to a legacy PBX: DTAG ---pri---- * ------ Hicmo (PSTN) | | Sip and more Many normal inbound calls are direcly routed to the hicom. Outbound calls from the Hicom go through LCR and then to PSTN. Inbound faxes are working, but outbound faxes from hicom to pstn are

hi, we are currently planning are large site which will migrate from an old siemens hicom pbx to asterisk. it will be a slow migration, the asterisk server will be inserted between the telco E1 and the hicom. new phones will be sip ones. the customer has several fax machines and analog phones (some of them have to be explosion-proof). around 50 analog ports in total are needed. as we are in

Hi, Is is possible to implement this: Hicom150 --- BRI (QSIG) ---- Asterisk I've been reading Siemens documentation and they say: "Digital nailed connections Corporate communication networks can be implemented over digital S0 or S2M nailed connections between several Hicom systems using the CorNet N protocol and between Hicom and non-Siemens systems using the QSig protocol. The

Greetings, asterisk list and community, I have a problem in how our telefon switch (Siemens HiCOM) "talks" with my new configured Asterisk server (V.11.18.0) without my Asterisks server in the middle.... <phone> <--> Siemens HiCOM <-ISDN-> NTBA <-...-> PBX Telekom A phone connected to the switch requests an "Outgoing" line by dialing "0".

Hi Everyone, Got a setup as follows: Telco ----> Siemens HiCom 300E <----> Asterisk1 <----IAX2 Trunk----> Asterisk2 <----> Siemens HiPath 4xxx The solution works except for one problem. Incoming calls from the telco get redirected to the Asterisk1 box with the correct extention, only if there is a callerid set on the call, the Asterisk1 box drops the call (it doesn't

Hi, I have a server with 2 TE110P cards. 1 card is plugged to telco line, another card is plugged with a Hicom PBX. I want to send some call to VoIP phones and all other to my PBX. I don't known how to make my dialplan : ===========Extensions.conf========== [incoming_call] exten => 090200000,1,Goto(callcenter,100,1) exten => 022956353,1,Goto(callcenter,100,1) exten =>

Hi * :-) I found in the online WiKi docs some information on how to integrate Asterisk with "old PBX"... http://www.voip-info.org/wiki-Asterisk+legacy+integration ...but I couldn't find anything on integration with a Siemens HiCom 150E. Later on we'll migrate to a HiPath 3750 so information covering this model would be nice too... Do you know if any of the PBX listed

We are using MFC/R2 driver successfully in at least three places in Brazil. I have problem with an Asterisk integrated with MFC/R2 with a Siemens Hicom 300. I can get a good audio quality with Grandstream, Polycom, and X-Lite softfones, but SIPURAS and Linksys get a garbled audio, something like a "Darth Vader" voice. We have tried everything in Sipura. The SIPURA 2000 and the Linksys

Hi all, I have this topology: telco_company>ISND30/PRI/>siemens_hicom_150>classic_analog_users_with_extensions_100-499 and I want to integration asterisk PBX on linux redhat 8 for cca. 4 users. so, my first question is, which hardware I need in linux server and which in hicom 150? and my second... it is possible to connect asterisk PBX directly to PSTN? in this case I'll have this

Hi I've bought the Wildcard TE110 some days ago but I'm unable to get it to work with Siemens HiCom 300. I've tried this so far: 1. I've used standard cat5 cable cut off on one edge and twisted wires 1 to 4 and 2 to 3 which is according to cisco a short circuit for E1 lines. Wildcard takes a few seconds and sets the link to green (OK). 2. I've tried to connect our running

Hello, in our company we are trying to do this: Fax <--> Traditional PBX <--> Asterisk <--> PSTN In practice, we have put an Asterisk equipped with a Sangoma A102 (2 PRI ports) between our PBX (Siemens HiCom) and the PSTN in order to have a VoIP network along the traditional telephony network. The problem is with the fax. We just want to send and receive faxes from/to our fax

Hello all, I really checked voip-info.org but it still seems to be not very easy and I just hope that there is anybody with a simular config. We have one PRI (euroisdn with 30 channels) coming from the DTAG. The second PRI should be connected to a Siemens Hicom 150E Pro Office PBX (was cheaper than a channel bank :-) Carrier ----S2M------ * -----S2M------Siemens | |