similar to: Grandstream GXP2000 and Interception of call ?

We are doing a medium sized office in NYC with 80 phones. The customer originally requested Polycom 601 phones. The COO also authorized us to purchase 2 Grandstream GXP2000 phones for the mail room. We find these phones much easier to configure and work with asterisk . They support BLF & intercom right out of the box. They can also be centrally managed and provisioned. They also sound great

I am trying to set up the BLF on a GXP2000. Currently what I have is extensions.conf: [globals] polycom430=SIP/101 [internal] exten => 101,1,Macro(voicemail,${polycom430}) [macro-voicemail] exten => s,1,Dial(${ARG1},10,tT) exten => s,2,VoiceMail(u${MACRO_EXTEN}@default ) exten => s,102,VoiceMail(b${MACRO_EXTEN}@default) [ext-local-custom] exten => 101,hint,${polycom430}

Version - Asterisk SVN-trunk-r12793M (1.2.4) I have 4 Grandstream GXP 2000 phones configured. However at the moment, I have had to disable BLF, Hints, and Call Limiting due to an extremely annoying bug which seems to make the phones channels "lock" in busy after a call has been hungup. If I do a show hints after say extension 200 has hung up I get the following -= Registered

Hi i have two problems with my Grandstream GXP2000 : 1- When i wan pickup a call, that's don't work's (*8EXTEN) and when i test whit Softphone, i have a error too, he say me *8201@MyContext not found .. in features.conf, i have: [general] parkext => 700 parkpos => 701-720 context => parkedcalls

Actually, I have tested this here with an Aastra 9133i and an Asterisk@Home server, and the 9133i will re-subscribe on its own after an Asterisk reboot, if you wait long enough. It took on the order of an hour to do so. Of course, a phone reboot will get it done faster, if necessary, but it _will_ eventually re-subscribe on its own. In another thread, I've seen a response that the GXP2000

I just downloaded the zip file from grandstreams website to upgrade my gxp2000 firmware from 1.0.0.3 to the latest but seems there are some files missing on the zip file... Anybody been able to upgrade their firmware? My website shows this files as missing: 201.133.125.152 - - [11/May/2005:16:47:16 -0500] "GET /firmware/ring1.bin HTTP/1.0" 200 12737 "-" "Grandstream

One of our clients is using a Grandstream GXP2000 with an attendant console. We have used the same phone with past clients successfully however this particular operator processes around 200 calls a hours and the GXP2000 for sure does not like the quick line shuffling and call volume. We get the following problems randomly: 1. menu stops working 2. transfer key stops working 3. Line 1 LED gets

Hi there, I am running Asterisk 1.2. I have a Grandstream GXP2000 and Aastra 9133i with BLF/Speedial configured for other extensions. The hint's are all configured in extensions.conf and it seems to work as it is supposed to until I reload the configuration in Asterisk or reboot the server. Then neither phone displays the BLF of other extensions until I reboot the phone. It continues

All, I have AAH 1.0 installed using Digium TDM04B and Grandstream GXP2000 phones. All seems well other than the phones have to be reset up to 5 times per day. It is like they lose thier ip connection or maybe thier SIP connection. Has anyone else experienced this issue? I have the phones set for static IP addresses and that doesnt seem to help either. Any help would be greatly

Is it possible to use hints from a realtime source like a db or curl ? I was looking at the grandstream GXP2000 Expansion Module (EXT) which has 56 fully programmable keys that work with BLF. You can daisy-chain 2 of these together to get 112 keys, plus the 18 on the 2010 phone to give 130 potential blfs. What I was wanting to do was to use the BLF as a type of agent monitor as well - when

Hello, I configured both asterisk and grandstream 2000 accourding to howtos on the web.. And everything seems working fin. But if i reload asterisk grandstream stops working with BLF. I need to restart the phone to enable BLF again. Any clues??

1. We just dial the extension directly and have speed dials setup for the first 6 parked positions. We don't use *8 at all. 2. Change the config on the phones under Account to "Send DTMF via RTP (RFC2833)" -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Noc Phibee Sent: Thursday, February 08,

I am looking to setup paging using the auto answer feature on the Grandstream GXP2000. I am thinking I will follow the method as described here: http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+page I will setup the 4th account on the phone to auto answer. Does anyone else have a method that works better? I also looked at the allpage AGI written on Voip-Info. But it seems

Stopping and restarting Asterisk will lose the hints, then you will have to wait until the phone registers again. With 1.2.7.1 a reload shouldn't lose anything. Change the register time on the phones to something less that 60 minutes if it's a big problem. Instead of factory defaulting the phones you might find a simple restart will re-register the phone and BLF will work on the phone.

Actually, I have tested this here with an Aastra 9133i and an Asterisk@Home server, and the 9133i will re-subscribe on its own after an Asterisk reboot, if you wait long enough. It took on the order of an hour to do so. Of course, a phone reboot will get it done faster, if necessary, but it _will_ eventually re-subscribe on its own. > Thanks Olle, > > So am I to understand that you

Hello, We have several clients with GXP2000 in their network and behind NAT. We have one particular client that has several GXP2000 behind a Linksys RV082 VPN Firewall/Router which is doing NAT services. According to SIP packet inspection, it detects it's a symmetric NAT. The problem we have is that even though we have configured Asterisk AND the GXP2000 to register every 60 minutes, they

Hi all, I have a GXP2000 with BLF configured. I follow the configuration guide to enable the pickup cmd as follow and include it under corresponding content. [BLF_group_pickup] exten => _**1XX,1,Pickup(${EXTEN:2}) exten => _**1XX,n,Hangup The I press the single key to pickup the call to extension 100 when there is a call to it. From CLI, I can see it issue **100 to asterisk but failed

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com

Asterisk 1.0.7 Has anyone got the hint function working, and maybe with the GXP2000. I am testing with 2 GXP2000 phones (firmware 1.0.1.9) at the moment trying to get the LED's to light up. On ext 690, button 1 is setup for ext 691, I did this using both methods 691, and <sip:691@192.168.69.1> On ext 691, button 1 is setup for ext 690, I did this using both methods 690, and

Hi, I used Grandstream (gxp2000, gxp2020) and Snom (370) SIP Phones, but with 2 extensions BLF status does not work correctly. have someone ever tested a Sip Phone with more then 60 BLF without problems? Can someone suggest me model and brand? Thanks, bye. -------------- next part -------------- An HTML attachment was scrubbed... URL: