Displaying 20 results from an estimated 3000 matches similar to: "mISDN"
2008 Sep 23
2
chan_misdn troubles
Hello
I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5.2 machine.
I am using the OpenVox B200P ISDN card.
My problem is that even though chan_misdn module seems to be loaded
correctly with
Asterisk (I can see it using 'module show' command) the misdn commands are
not available
to me in the CLI so I cannot tell if my box is correctly interfacing with
the ISDN card
Any ideas
2005 Oct 03
4
R: Diva
Which models of Diva could work with CAPI and asterisk?
Thanks
Giordano
________________________________
Da: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] Per conto di
gw@adcomcorp.com
Inviato: sabato 1 ottobre 2005 23.46
A: asterisk-users@lists.digium.com
Oggetto: RE: [Asterisk-Users] Diva
Nope. At least I tried and never could get it
2007 Apr 02
3
misdn and debian
Hi,
I have FRITZ!Card PCI card. I have installed misdn-1.1.0 on stable debian
3.1 with 2.6.8. kernel. Then I reboot system, and it doesn't boot, it stops
near "Apache2 starting...". I started my system with "recovery" kernel,
and tun off misd, then my system works fine. I think it's problem with
memory.
Has anybody debian and misdn working fine? Maybe you can
2005 Sep 27
1
R: Best drivers for HFC-S ISDN cards
Mine is very similar: i don't have echocancelwhenbridged=yes because it seems work only on TDM, is it ?
And in Italy, I often have set pridialplan = unknown
About echo I have some problems, but only at the beginning of the call. After 3-4 seconds the echo became almost null, specially with snom 190; with pa168s and ywh10 I have again some problem, the echo come up also after 1 minute of
2006 Oct 18
2
echotraining=yes in misdn.conf is invalid or out of range.
Hi.
I'm having problems with chan_mISDN configuration. Line
"echotraining=yes" causes warning, when Asterisk is parsing misdn.conf
and I'm confused why the PBX doesn't accept the setting. No matter
which section I try to offer it, it is always invalid or out of range.
The setting itself is supposed to be valid, it is in the sample
configuration file of chan_mISDN 0.3.1.
2008 Mar 21
1
TxFax in asterisk 1.4
Hi guys,
I installed asterisk 1.4.17 and mISDN 1.1.7 with AGX addons to test the faxs. If I receive i do not have any problem, but i'm not able to send put any fax, i get always the same error:
txfax_exec: transmission done with ast_read(chan) == NULL
Anyone has txfax working with asterisk 1.4? I try to download app_rxfax.c and app_txfax.c with the asterisk.patch file but without success.
2004 May 24
5
mpg123
When I start * I get 6 mpg123 processes start as well. Is this normal?
Often after a couple of days these mpg123 processes start to consume cpu and
I have to kill them off.
I do not have a sound card in the server and I have noload => chan_oss.so
Simon
2006 Mar 28
3
R: Echo cancellation
Ok, but is there a way to check if echo cancellation is active on a call in progress ?
Thanks
Giordano
-----Messaggio originale-----
Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Steve Davies
Inviato: marted? 28 marzo 2006 16.43
A: Asterisk Users Mailing List - Non-Commercial Discussion
Oggetto: Re: [Asterisk-Users] Echo cancellation
2005 Jun 29
4
Music oh hold
Sorry, i also tried this:
exten => 6000,1,Answer
exten => 6000,2,MusicOnHold(default)
and i got this result:
*CLI> -- Executing Answer("SIP/2391-8cdd", "") in new stack
-- Executing MusicOnHold("SIP/2391-8cdd", "default") in new stack
Jun 29 19:33:47 WARNING[1616]: res_musiconhold.c:354 moh0_exec: Unable to start music on hold (class
2006 Jan 12
1
R: app_rxfax.so and app_txfax.so
I have to re-compile also app_rxfax.so and app_txfax.so or just spandsp ?
Thanks
Giordano
________________________________
Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Colin Anderson
Inviato: gioved? 12 gennaio 2006 17.20
A: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Oggetto: RE: [Asterisk-Users]
2005 Sep 30
2
chan_capi-0.3.5
Hi all,
i'm tryinf to install chan_capi but i get this error
root@obelix:/usr/src/chan_capi-0.3.5# make
gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g
-I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i586
-DNEVER_EVER_EARLY_B3_CONNECTS -DCAPI_ES -DCAPI_GAIN
-DDEFLECT_ON_CIRCUITBUSY -DCAPI_SYNC -DUNSTABLE_CVS
-Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO
2005 Oct 03
3
codec g723 on Via C3
Hi,
just a question: anyone has never installed g729 codec on VIA
motherboard with C3 processor ?
I'm having problem with IPP libraries, and Intel said that it works only
on Inter processor.
Any suggestion?
Thanks
Giordano
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2006 Jan 12
6
app_rxfax.so and app_txfax.so
Hi,
I just installed spandsp 0.0.3pre6 with libtiff 3.7.1 and evrythinghs is
ok. I recompiled asterisk and run ldocnfig, but whrn I start asterisk I
get this error:
[app_rxfax.so]Jan 12 16:40:42 WARNING[1569]: loader.c:258
ast_load_resource: /usr/lib/asterisk/modules/app_rxfax.so: undefined
symbol: fax_set_phase_d_handler
Jan 12 16:40:42 WARNING[1569]: loader.c:440 load_modules: Loading
2006 Jan 20
3
Dect to SIP PCI card
Hi all,
I'm looking for a PCI card which i could install on asterisk box, with
purpose to use 15-20 cordless dect phone in a very "dect cell".
Is there anyone that could help me pls ?
Thanks
Giordano
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2005 Sep 16
2
R: direct sip call pickup
I cannot use CVS, is there anoyher way to use direct pickup ?
Thanks again
Giordano
________________________________
Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Alexander Lopez
Inviato: venerd? 16 settembre 2005 17.53
A: Asterisk Users Mailing List - Non-Commercial Discussion
Oggetto: RE: [Asterisk-Users] direct sip call
2005 Jun 30
3
R: Music oh hold
This is my musiconhold.conf and my folder:
root@voip:/etc/asterisk# less musiconhold.conf
[classes]
default => quietmp3:/var/lib/asterisk/mohmp3
;loud => mp3:/var/lib/asterisk/mohmp3
;random => mp3:/var/lib/asterisk/mohmp3,-z
;unbuffered => mp3nb:/var/lib/asterisk/mohmp3
;quietunbuf => quietmp3nb:/var/lib/asterisk/mohmp3
; Note that the custom mode cannot handle escaped parameters
2005 Sep 29
2
PRI value
Hi group,
anyone can explain me the exact difference between pri value in
zapata.conf ?
; PRI Dialplan: Only RARELY used for PRI.
;
; unknown: Unknown
; private: Private ISDN
; local: Local ISDN
; national: National ISDN
; international: International ISDN
If I use it, I also must use prilocaldialplan = local ?
Thanks
Giordano
-------------- next
2005 May 30
4
R: R: R: AT-320 + supervised transfer
I known. I'm using the 1.44 firmware version relesed on 26 may. I worked for italian IVR an HTTP pgaes.
So i can only update asterisk with CVS and try atxfer.
Thanks for all
-----Messaggio originale-----
Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Gavin Hamill
Inviato: luned? 30 maggio 2005 18.40
A:
2005 May 31
2
R: R: R: R: AT-320 + supervised transfer
Good...it almost works fine! I just have 't' in command Dial, but i also have 'T'. Is it a problem ?
This is my Dial()
exten => 605,1,Dial(${GIORDANO NAT},60,Ttr)
I have only a problem: A and B are speaking, B calls C and ask it if wants speak with A, C accept but if B hang up A is waiting and C get busy tone. To make it works B don't have to hangup but habe to press
2013 Aug 27
1
ISDN outgoing caller id
Hi,
is anybody out there who can set the outgoing caller id on ISDN (CAPI
or misdn) channels? I've tryed everything what I found in forums, os
voip-info.com but no luck. I use a fritz card with CAPI in my first
installation (1 BRI), and a hfc 4 port bri card with misdn on other.
The first installation have p-t-mp configuration, the second one is
p-t-p. Both configuration is EuroISDN in